Brocade DCX 8510-4 Backbone Hardware Reference Manual Uživatelský manuál stáhnout pdf (Strana 24)

Installation tasks, time, and items required (Continued)TABLE 2

Installation task Time estimate Items required

Installing power cables and

powering on the Brocade DCX

8510-4

20 minutes Power cables (provided in the Brocade DCX 8510-4

accessory kit).

Establishing serial connection,

logging in to Brocade DCX

8510-4, and configuring IP

addresses

20 minutes Serial cable (provided in the accessory kit).

Workstation computer with a serial port or terminal server

port and a terminal emulator application (such as

HyperTerminal).

Ethernet IP addresses for the Brocade DCX 8510-4 chassis

and for both control processor blades: total three addresses.

Installing an Ethernet cable,

opening a Telnet session, and

configuring the Brocade DCX

8510-4 domain ID, date and

time, and additional system

parameters. Verify and back up

configuration.

20 minutes Ethernet cabling (optional) for Telnet access.

Refer to the Fabric OS Administrator's Guide.

Installing transceivers as needed 20 minutes

(longer if using

high-density port

blades)

SFP+, mSFP, and QSFP optical transceivers as needed.

Attaching fiber-optic cables,

cable ties, and cable guides

2-3 hours Fiber-optic cables and cable ties.

Preparing for the Brocade DCX 8510-4 installation

NOTE

Read the Caution and Danger Notices on page 145 before installation. Read Power specifications on

page 117 to plan for meeting power supply standards before installing the chassis. Read Managing

cables on page 42 to plan for cable management.

The following steps are required to ensure correct installation and operation.

1. Provide a space that is 9 rack units (9U) high, 61.19 cm (24.09 in.) deep, and 43.74 cm (17.22 in.)

wide. 1U is equal to 4.45 cm (1.75 in.). If you do not use the provided Port Side Exhaust Kit, the

space needs to be only 8 rack units (8U) high.

Plan to install the Brocade DCX 8510-4 with the nonport side facing the air-intake aisle. The

Brocade DCX 8510-4 can be installed facing either direction, if serviceability and cooling

requirements are met.

2. Ensure that dedicated electrical branch circuits with the following characteristics are available:

NOTE

Refer to Power specifications on page 117 for specific requirements depending on your chassis

configuration.

Preparing for the Brocade DCX 8510-4 installation

24 Brocade DCX 8510-4 Backbone Hardware Reference Manual

53-1002177-07

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 155 156

Komentáře k této Příručce

Žádné komentáře

Brocade DCX 8510-4 Backbone Hardware Reference Manual Uživatelský manuál Strana 24

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Brocade DCX 8510-4 Backbone Hardware Reference Manual