Brocade Network Advisor SAN + IP User Manual v12.1.0 Uživatelský manuál stáhnout pdf (Strana 194)

Brocade Network Advisor SAN + IP User Manual 127

53-1002949-01

Individual IP device discovery

e. Select one of the following privacy protocol types from the Privacy Protocol list:

• None

• CBC-DES

• CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and

response packets.

f. Enter the privacy password in the Privacy Password field.

The password can be from 1 through 16 characters long, case sensitive, and allows all

printable ASCII characters. The password display as asterisks.

6. Change the SNMPv3 read only credentials by completing the following steps.

a. Click the SNMPv3 Read Only tab.

b. Enter the SNMPv3 user name in the User ID field.

The user name can be from 1 through 16 characters long, case sensitive, and allows all

printable ASCII characters.

c. Select one of the following protocols from the Authentication Protocol list:

• None

• HMAC_MD5

• HMAC_SHA

d. Enter the SNMPv3 authentication password in the Authentication Password field.

The password can be from 8 through 16 characters long, case sensitive, and allows all

printable ASCII characters. The password display as asterisks.

e. Select one of the following privacy protocol types from the Privacy Protocol list:

• None

• CBC-DES

• CFB_AES-128

If you select a privacy protocol, the selected protocol encrypts the SNMP request and

response packets.

f. Enter the privacy password in the Privacy Password field.

The password can be from 1 through 16 characters long, case sensitive, and allows all

printable ASCII characters. The password display as asterisks.

7. Change the SNMPv1 and SNMPv2c read-write credentials by completing the following steps.

a. Click the SNMPv1/v2c Read/Write. tab

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 237 238

Žádné komentáře

Brocade Network Advisor SAN + IP User Manual v12.1.0 Uživatelský manuál Strana 194