Brocade Network Advisor SAN + IP User Manual v12.3.0 Uživatelský manuál Strana 247
- Strana / 270
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Brocade Network Advisor SAN + IP User Manual 177
53-1003155-01
Flyover settings
5
FIGURE 68 Options dialog box (Flyovers pane, Connection tab)
a. Select the
protocol type (FC or IP) from the Type list, if necessary.
The default protocol is FC. Depending on which protocol you select, some properties may
not be available for all protocols.
b. Select each property you want to display in the connection flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available for all protocols:
FC (default)
FCoE
• Active FC4 Types
• Address
• Attached Port#
• Blocked Configuration
• Class of Service
• Device Type
• Fabric
• FC Address
• IP Address
• Master Port #
• Max Frame Size (bytes)
• Name
• Name (port)
• Node WWN
• Operational State
• OS Device Name
• Port #
• Port Blocked Reason
• Port State
• Port Type
• Port WWN
• Speed Configured (Gbps)
• Speed Supported (Gbps)
• Symbolic Name
• Supported FC4 Types
• Zone Alias
• Name
• Node WWN
• MAC
• Port#
• Port Type
• FCoE Index #
- Brocade Network Advisor 1
- Document History 2
- Contents 5
- Chapter 2 Patches 6
- Chapter 3 Discovery 6
- Chapter 7 Web Client 10
- Chapter 9 View Management 13
- Chapter 10 MRP Topology 15
- Chapter 11 Call Home 15
- Chapter 12 Third-party tools 16
- Chapter 15 Host Port Mapping 19
- Chapter 18 VCS Management 20
- Chapter 19 Host Management 21
- Chapter 21 Telemetry 23
- Chapter 24 Virtual Fabrics 25
- Chapter 26 Zoning 29
- Chapter 28 Fabric Binding 32
- Chapter 29 Port Fencing 32
- Chapter 30 FICON Environments 33
- Chapter 31 IP Element Manager 33
- Chapter 36 VLAN Management 36
- Chapter 37 MPLS Management 36
- Chapter 38 VIP Servers 38
- Chapter 41 Deployment Manager 39
- Chapter 43 Performance Data 39
- Chapter 44 Flow Vision 41
- Chapter 45 Frame Monitor 42
- Chapter 46 Power Center 43
- Chapter 47 Policy Monitor 43
- Chapter 48 Fault Management 44
- Chapter 51 Technical Support 47
- Chapter 52 Reports 47
- Appendix A Application menus 48
- Appendix C Event Categories 48
- Appendix D User Privileges 49
- Appendix E Device Properties 49
- Appendix G CLI Templates 49
- Chapter H Troubleshooting 49
- Appendix I Database Fields 50
- About This Document 53
- What’s new in this document 63
- Document conventions 66
- Feature Fabric OS 100
- Installing a patch 103
- Uninstalling a patch 104
- Discovery 107
- FCS policy and seed switches 108
- Discovering fabrics 110
- Attribute Value 112
- Failed — Not Reachable 114
- Configuring SNMP credentials 115
- Rediscovering a fabric 116
- Deleting a fabric 117
- DCB discovery 118
- • New Discovery Pending 119
- • “Deleting a fabric” 120
- SAN Fabric monitoring 121
- TABLE 13 Monitor Icons 122
- TABLE 14 Monitor Intervals 122
- SAN Seed switch 125
- Seed switch requirements 126
- Seed switch failover 126
- Changing the seed switch 126
- IP discovery overview 128
- Configuration requirements 130
- Discovery of IPv6 addresses 130
- VDX/VCS discovery 133
- # DeviceWWNToIPMap.txt 134
- In-band IP address 134
- Standalone discovery 135
- VCS fabric discovery 135
- VCS fabric rediscovery 135
- VCS fabric split and merge 136
- HyperEdge stack discovery 140
- IP SNMP credentials 142
- Adding SNMPv3 credentials 144
- Editing SNMPv3 credentials 146
- Default IP user credentials 148
- FIGURE 20 Default Passwords 149
- FIGURE 23 Enable Super User 150
- IP Object identifier filters 154
- Excluding product types 155
- FIGURE 25 Preferences tab 156
- IP discovery profiles 159
- FIGURE 26 Profile tab 160
- Configuring address ranges 162
- Adding CIDR subnet addresses 163
- Adding subnet addresses 163
- Adding IP addresses 164
- Excluding subnet addresses 165
- Editing address ranges 166
- Editing CIDR subnet addresses 167
- Editing subnet addresses 167
- Editing IP addresses 167
- Scheduling discovery 168
- Editing a discovery schedule 172
- FIGURE 40 Preferences tab 175
- Deleting a discovery profile 176
- Starting discovery manually 176
- Stopping discovery 177
- Viewing discovery status 177
- Viewing discovery reports 178
- E-mailing discovery reports 178
- Exporting discovery reports 179
- Viewing the discovery log 179
- FIGURE 42 SNMPv3 credentials 181
- Editing IP device discovery 183
- FIGURE 45 SNMPv3 credentials 184
- FIGURE 46 SNMPv1/v2c settings 186
- Host discovery 189
- Importing Hosts from a fabric 193
- VM Manager discovery 200
- Discovering a VM manager 201
- Editing a VM manager 202
- IP Rediscovery 205
- Rediscovering IP devices 206
- Rediscovering a group 207
- Management Groups 209
- Product group overview 210
- Static product groups 211
- Dynamic product groups 213
- Viewing test results 218
- Deleting a product group 219
- Port Groups 220
- Duplicating a port group 221
- Viewing port group properties 222
- Deleting a port group 223
- Application Configuration 225
- Server Data backup 227
- Configuring backup 228
- Enabling backup 230
- Disabling backup 230
- Viewing the backup status 231
- Changing the backup interval 231
- Starting immediate backup 231
- Server Data restore 232
- Restoring data 233
- SAN data collection 234
- SAN display settings 238
- Resetting your display 239
- Importing the OUI file 240
- Editing the product type 241
- SAN End node display 242
- SAN Ethernet loss events 242
- Event storage settings 243
- Flyover settings 245
- Name settings 248
- Fixing duplicate names 249
- Viewing names 251
- \root (Linux) 252
- Adding a name to a new device 253
- Removing a name from a device 253
- Editing names 254
- Exporting names 254
- Importing Names 254
- Device Character limit 255
- Searching for a device by WWN 256
- Configuring the server name 256
- Configuring login security 258
- Disabling the login banner 258
- Syslog Registration settings 259
- • NONE (go to step 6) 261
- Software Configuration 262
- Viewing certificates 263
- Client export port settings 269
- Client/Server IP 269
- IP preferences 273
- Configuring SNMP preferences 279
- Memory allocation settings 280
- Small SAN Enterprise 282
- Medium SAN Enterprise 282
- Large SAN Enterprise 282
- Configuring asset polling 283
- TABLE 27 Network size status 284
- Configuring SAN communication 285
- Configuring IP communication 286
- FTP/SCP/SFTP server settings 287
- Server port settings 292
- Support mode settings 293
- FIPS Support 295
- Fabric tracking 295
- Enabling fabric tracking 296
- Disabling fabric tracking 296
- User Account Management 301
- User accounts 305
- Editing a user account 307
- Copying a user account 307
- Exporting a user account 308
- Importing a user account 309
- Disabling a user account 310
- Enabling a user account 310
- Deleting a user account 311
- Unlocking a user account 311
- Creating a new role 311
- Editing a role 312
- Copying a role 313
- Deleting a role 313
- Adding privileges to a role 313
- Areas of responsibility 315
- Editing an AOR 316
- Copying an AOR 317
- Deleting an AOR 317
- Assigning products to an AOR 317
- Password policies 319
- User profiles 322
- Viewing your user profile 323
- Editing your user profile 324
- Changing your password 324
- Viewing your password policy 325
- Resetting optional messages 326
- Configuring CLI credentials 326
- Web Client 329
- Dashboard 330
- Dashboard toolbar 332
- General dashboard functions 332
- Dashboard customization 333
- FIGURE 99 Scope dialog box 334
- Setting the time interval 335
- Default dashboards 335
- Product Status and Traffic 337
- SAN Ports Health 337
- My Dashboards 337
- Shared Dashboards 337
- Status widgets 338
- Bottlenecked Ports widget 339
- Events widget 340
- Host Adapter Inventory widget 341
- IP Inventory widget 342
- IP Status widget 344
- SAN Inventory widget 345
- SAN Status widget 347
- Status widget 348
- VM Alarms widget 349
- Port Health Violations widget 352
- Performance monitors 353
- Top Port C3 Discards monitor 356
- Top Port CRC Errors monitor 358
- Top Port Discards monitor 358
- Top Port Errors monitor 360
- Top Port Link Resets monitor 363
- Top Port Receive EOF monitor 365
- Top Port Sync Losses monitor 367
- Top Port Traffic monitor 369
- Inventory 381
- Fabric summary view 382
- FIGURE 123 Fabric summary 383
- FIGURE 124 Fabric Page area 383
- FIGURE 126 Host Details table 384
- FIGURE 128 Events table 385
- Viewing fabric properties 387
- Product summary view 388
- FIGURE 133 Port Details area 389
- FIGURE 134 Violations table 391
- FIGURE 135 Events table 392
- Viewing product properties 396
- Port summary view 397
- FIGURE 138 Port summary 398
- FIGURE 139 Violations table 400
- FIGURE 141 Events page 404
- Table functions 405
- FIGURE 142 Reports page 406
- Reports toolbar 407
- General report page functions 407
- Generating a report 407
- Generated reports 409
- Report schedules 410
- Configuring a new schedule 411
- E-mailing reports 415
- Editing a schedule 415
- Activating a schedule 416
- Report templates 417
- Exporting report templates 418
- Importing report templates 419
- Sharing report templates 419
- Default reports 420
- Fabric Ports report 424
- Switch Report 427
- Zone Summary reports 429
- Dashboard Management 435
- FIGURE 154 Dashboard tab 436
- Dashboard messages 438
- Dashboard Privileges 439
- Accessing a dashboard 440
- Filtering the dashboards list 440
- Setting the dashboard display 443
- • Type — The type of monitor 444
- Setting the network scope 446
- Setting the time scope 449
- Dashboard playback 450
- Access Point Status widget 454
- Bottleneck Graph dialog box 456
- Monitor types 504
- Measures 505
- - Wireless 506
- • Traffic flows 506
- TABLE 39 Port measures types 511
- Common 521
- Wireless 522
- Traffic flow monitor types 523
- Traffic flow measures 524
- View Management 533
- SAN tab overview 534
- SAN main toolbar 535
- View All list 536
- Port Display buttons 537
- Connectivity Map toolbar 537
- Product List 538
- Connectivity Map 539
- Utilization Legend 540
- IP tab overview 541
- IP main toolbar 543
- Product List toolbar 543
- Host Product List toolbar 545
- Topology Map toolbar 545
- Host topology map toolbar 546
- IP Product List 546
- Topology Map 547
- Topology Map functions 548
- FIGURE 212 SAN Minimap 550
- Resizing the Minimap 551
- Status bar 552
- Icon legend 553
- IP product icons 554
- Host product icons 555
- SAN group icons 555
- Host group icons 556
- IP group icons 556
- SAN port icons 556
- IP port icons 557
- SAN product status icons 557
- IP product status icons 557
- Customizing the main window 558
- Zooming out 559
- Viewing fabrics 559
- Viewing groups 559
- Exporting the topology 560
- Changing the order of columns 561
- Resizing the columns 562
- Sorting table information 562
- Copying table information 562
- Exporting table information 562
- Product List customization 563
- Editing a property label 564
- Deleting a property label 564
- Searching for a device 565
- Restricting a search by node 566
- Address Finder 567
- Finding IP addresses 568
- Finding MAC addresses 570
- SAN view management overview 572
- Creating a customized view 573
- Editing a customized view 574
- Deleting a customized view 576
- Copying a view 576
- SAN topology layout 577
- Changing the product label 581
- Changing the port label 581
- Changing the port display 581
- Grouping on the topology 582
- IP topology view manager 584
- Network Objects view 585
- IP Topology view 587
- L2 Topology view 587
- Ethernet Fabrics view 588
- VLAN Topology view 588
- STP/RSTP topology 589
- Generating an STP/RSTP Report 590
- Exporting an STP/RSTP Report 590
- Host Topology view 591
- IP topology map components 593
- TABLE 54 Legend components 594
- Topology map layout 595
- Orthogonal 596
- Orthogonal (Merge Lines) 597
- Hierarchical 597
- Circular 598
- Free Form 598
- Creating a customized layout 599
- Customizing the Topology Map 601
- Printing a map 604
- Port actions 605
- Disabling port actions 606
- MRP Topology 609
- Viewing a MRP Topology map 610
- Viewing a MRP ring 611
- TABLE 56 612
- • Organic 614
- • Hierarchical 614
- • Self Organizing 615
- • Circular 615
- Refreshing MRP Topology data 618
- Viewing MRP properties 618
- Call Home 621
- overview 621
- System requirements 623
- Showing a Call Home center 626
- Hiding a Call Home center 626
- Editing a Call Home center 627
- Enabling a Call Home center 634
- Enabling supportSave 634
- Disabling a Call Home center 635
- Viewing Call Home status 636
- Defining an event filter 638
- Third-party tools 643
- Launching a Telnet session 644
- Launching an Element Manager 645
- Launching Web Tools 645
- Launching FCR configuration 646
- Launching Name Server 647
- Launching HCM Agent 648
- Launching Fabric Watch 648
- Adding a tool 649
- Registering a SCOM server 655
- Editing a SCOM server 656
- Removing a SCOM server 656
- Server Management Console 657
- Services tab 658
- Refreshing the server status 659
- Stopping all services 659
- Stopping the CIMOM services 659
- Starting all services 660
- Restarting all services 660
- Ports tab 661
- AAA Settings tab 662
- FIGURE 242 AAA Settings tab 663
- Co 664
- Editing a service 1000
- Copying a service 1000
- Deleting a service 1001
- Service group configuration 1002
- Creating a service group 1003
- Editing a service group 1004
- Copying a service group 1005
- Deleting a service group 1006
- Device_Name 1007
- 53-1003155-01 1008
- • = (equal to) 1009
- • != (not equal to) 1009
- • > (greater than) 1009
- • < (less than) 1009
- Editing a MAC filter 1010
- Copying a MAC filter 1011
- Deleting a MAC filter 1013
- Assigning MAC filters 1013
- In this chapter 1023
- ATTENTION 1026
- Virtual Fabrics 1029
- Virtual Fabrics requirements 1030
- Logical switch type Ports 1031
- Configuring Virtual Fabrics 1034
- Enabling Virtual Fabrics 1035
- Disabling Virtual Fabrics 1035
- Deleting a logical switch 1041
- SAN Encryption Configuration 1047
- Encryption Center features 1048
- Encryption user privileges 1049
- Smart card usage 1050
- Using system cards 1055
- Deregistering system cards 1057
- Using smart cards 1057
- Tracking smart cards 1057
- Editing smart cards 1059
- Network connections 1060
- Blade processor links 1061
- (KAC) certificate 1062
- Configuration parameters 1064
- Key vault type and vendor 1065
- (manual identity enrollment) 1071
- Establishing the trusted link 1073
- Data Encryption Keys 1076
- ESKM/SKM 1080
- ESKM/SKM appliance 1084
- <primary 1086
- - HTTPS Port 433 1089
- - SSH Port 22 1089
- - Enable SSH 1089
- - KM Server Port 9000 1089
- - Enable KM Server 1089
- Creating a client on TEKA 1090
- TEKA appliance 1092
- KAC_Certificate_Name.der 1094
- Setting FIPS compliance 1098
- Creating a local CA 1099
- Creating a server certificate 1100
- -----BEGIN CERTIFICATE 1103
- Creating a cluster 1105
- Backing up the certificates 1111
- Configuring the KMIP server 1113
- Adding a node to the cluster 1114
- Encryption preparation 1117
- Manager (DPM) 1122
- Key Manager (LKM/SSKM) 1128
- Secure Key Manager (ESKM/SKM) 1134
- Lifetime Manager (TKLM) 1143
- Interoperability Protocol 1148
- --initnode command 1154
- --set -keyvault command 1154
- --reg keyvault command 1155
- High availability clusters 1161
- Creating HA clusters 1162
- Failback option 1164
- Invoking failback 1164
- Adding an encryption target 1165
- FIGURE 485 Next Steps screen 1173
- Configuring storage arrays 1180
- Remote replication LUNs 1180
- SRDF pairs 1181
- Moving targets 1186
- Tape LUN statistics 1189
- Encryption engine rebalancing 1193
- Master keys 1194
- Active master key 1195
- Alternate master key 1195
- Master key actions 1196
- Security settings 1203
- Setting zeroization 1204
- Redirection zones 1206
- Disk device decommissioning 1206
- Decommissioning disk LUNs 1207
- Displaying Universal IDs 1209
- Setting disk LUN Re-key All 1210
- Thin provisioned LUNs 1214
- Thin Provisioning support 1215
- General tab 1222
- Members tab 1226
- Members tab Remove button 1227
- Security tab 1228
- HA Clusters tab 1230
- Link Keys tab 1232
- Tape Pools tab 1233
- Tape pools overview 1234
- Adding tape pools 1234
- Engine Operations tab 1236
- TABLE 112 Encryption acronyms 1237
- Zoning overview 1239
- Red Zone 1240
- Green Zone 1240
- Blue Zone 1240
- Online zoning 1241
- Offline zoning 1241
- Zone database size 1242
- Zoning configuration 1243
- Creating a zone 1244
- Viewing zone properties 1244
- Adding members to a zone 1245
- Creating a member in a zone 1246
- Removing a member from a zone 1247
- Renaming a zone 1247
- Deleting a zone 1248
- Duplicating a zone 1248
- Creating a zone alias 1250
- Editing a zone alias 1251
- Exporting zone aliases 1252
- Renaming a zone alias 1252
- Deleting a zone alias 1252
- Duplicating a zone alias 1253
- Creating a zone configuration 1253
- Renaming a zone configuration 1257
- Deleting a zone configuration 1257
- Refreshing a zone database 1260
- Merging fabrics 1260
- Merging two zone databases 1261
- LSAN zones 1264
- VCS fabric 1265
- Fabric OS fabric 1265
- Creating an LSAN zone 1266
- LSAN tagging 1269
- Traffic Isolation zones 1270
- Boot LUN zones 1275
- Modifying a Boot LUN zone 1276
- Zoning administration 1277
- Listing zone members 1282
- Listing un-zoned members 1283
- Removing an offline device 1283
- Replacing zone members 1284
- Fibre Channel over IP 1287
- FCIP services licensing 1288
- FCIP Concepts 1288
- IP network considerations 1288
- TABLE 114 FCIP capabilities 1289
- FCIP trunking 1290
- Circuit Failover Grouping 1294
- Adaptive Rate Limiting 1296
- Configuring QoS Priorities 1298
- Term Definition 1300
- QOS, DSCP, and VLANs 1301
- Open systems tape pipelining 1303
- FICON emulation features 1304
- Tape write pipelining 1305
- Tape read pipelining 1305
- Teradata pipelining 1305
- Planning the configuration 1306
- When to enable Fast Write 1310
- FCIP configuration guidelines 1311
- Configuring an FCIP tunnel 1312
- Adding an FCIP circuit 1317
- Circuit configuration failure 1322
- Enabling Tperf test mode 1323
- Configuring QoS percentages 1323
- Configuring FICON emulation 1325
- Viewing FCIP port properties 1330
- Editing FCIP circuits 1332
- Disabling FCIP tunnels 1333
- Enabling FCIP tunnels 1333
- Deleting FCIP tunnels 1334
- Disabling FCIP circuits 1334
- Enabling FCIP circuits 1334
- Deleting FCIP Circuits 1334
- (Figure 559) 1337
- (Figure 560) 1338
- Fabric Binding 1341
- Enabling fabric binding 1343
- Disabling fabric binding 1344
- Port Fencing 1349
- Thresholds 1352
- C3 Discard Frames threshold 1353
- Invalid CRCs threshold 1354
- Invalid words threshold 1354
- Link Reset threshold 1354
- Protocol error threshold 1354
- State Change threshold 1354
- Adding thresholds 1355
- Adding a Link Reset threshold 1359
- Assigning thresholds 1363
- Unblocking a port 1363
- Editing thresholds 1364
- Finding assigned thresholds 1368
- Viewing thresholds 1368
- Removing thresholds 1369
- FICON Environments 1371
- Configuring the switch 1374
- • “Enabling Virtual Fabrics” 1377
- Configuring FICON display 1379
- Cascaded FICON fabric 1386
- Cascaded FICON fabric merge 1389
- Resolving merge conflicts 1393
- Port groups 1394
- Creating a port group 1395
- Viewing port groups 1395
- Editing a port group 1396
- Swapping blades 1397
- IP Element Manager 1399
- Switch properties 1402
- Properties dialog box 1403
- Element Manager toolbar 1404
- Displaying port properties 1405
- VLAN View port properties 1406
- Status indicator icons 1409
- Table capabilities 1409
- Performance data 1410
- Configure dialog box 1411
- Management Module switchover 1412
- Switch Fabric Module 1413
- Port mirroring 1414
- FIGURE 600 sFlow dialog box 1416
- Adding a VRRP/VRRP-E router 1417
- Deleting a VRRP/VRRP-E router 1418
- VRF management 1419
- Adding VRF in an MLX device 1420
- Deleting VRF in an MLX device 1420
- Web Management interface 1421
- TABLE 126 Troubleshooting 1423
- Configuration file manager 1425
- Viewing the configuration 1430
- FIGURE 609 Compare dialog box 1431
- Restoring a configuration 1433
- Configuration deviation 1435
- Change tracking 1436
- RASLog events 1438
- Configuration snapshots 1444
- FIGURE 613 Compare dialog box 1446
- • Not Applicable 1447
- VLAN configuration name 1448
- Schedule backup 1451
- Disabling a backup schedule 1453
- IP Configuration Wizard 1455
- Payloads 1456
- Interface Payloads: 1457
- Payload name Description 1457
- • Save to Flash 1461
- • Save to Flash and Reload 1461
- CLI Configuration Management 1467
- CLI configuration overview 1467
- Viewing existing templates 1468
- Changing product credentials 1474
- Previewing CLI commands 1476
- CLI command guidelines 1477
- Testing a configuration 1479
- Deleting a configuration 1483
- CLI configuration deployment 1484
- Monitoring configurations 1486
- CLI deployment reports 1493
- CLI configuration scheduling 1494
- Obtaining software files 1497
- Boot image management 1498
- Software image management 1501
- Unified image management 1504
- Updating unified images 1507
- Updating firmware serially 1507
- VLAN Management 1511
- Private VLAN 1512
- Remote Switched Port Analyzer 1512
- Transparent LAN Support 1513
- Displaying a list of VLANs 1514
- VLAN Manager tabs 1515
- Displaying VLANs by products 1517
- FIGURE 647 MAC Group Address 1518
- Port VLANs 1520
- Assigning DCB ports to a VLAN 1523
- Adding VLAN properties 1523
- Deploying VLAN configurations 1526
- Target context STP type 1528
- Configuring MSTP on a product 1530
- VLAN routing 1532
- MPLS Management 1535
- MPLS licensing 1536
- MPLS overview 1537
- Viewing LSP path information 1540
- Viewing RSVP LSP information 1541
- Adding an LSP admin group 1543
- Editing an LSP admin group 1544
- Deleting an LSP admin group 1545
- Adding an LSP path 1545
- Editing an LSP path 1546
- Duplicating an LSP path 1547
- Deleting an LSP path 1547
- FIGURE 672 Bypass LSP 1554
- Editing an RSVP LSP 1555
- Duplicating an RSVP LSP 1555
- Deleting an RSVP LSP 1555
- Displaying LSP Topologies 1557
- LSP Topology View Options 1558
- MPLS Domain 1559
- VLL manager 1560
- VLL Manager Views tab 1561
- Editing a VLL instance 1572
- Deleting VLL instances 1572
- VPLS Manager 1576
- Configuring endpoint settings 1582
- Editing a VPLS instance 1587
- Deleting a VPLS instance 1587
- VCID pools 1589
- Editing a MEP 1597
- Sending a loopback message 1602
- Sending a linktrace message 1603
- Configuring frame delay 1605
- VIP Servers 1607
- Server port statistics 1611
- Global Server Load Balancing 1613
- Viewing the GSLB Manager 1614
- GSLB policy management 1615
- GSLB site management 1621
- GSLB zone configuration 1623
- Adding a host to a zone 1624
- Controller configuration 1626
- • Metric used 1628
- Scheduling a deployment 1630
- SSL certificates 1633
- SSL certificate configuration 1634
- Creating key passwords 1647
- Appending SSL certificates 1649
- Chaining SSL certificates 1649
- Deleting SSL certificates 1651
- Deployment Manager 1653
- Deploying a configuration 1655
- Viewing deployment logs 1655
- FC troubleshooting 1659
- Tracing FC routes 1660
- Adding a detached device 1662
- Port diagnostics requirements 1663
- • Link traffic 1665
- • Latency measurement 1665
- • Measure link distance 1665
- Status Detail messages 1666
- FCIP troubleshooting 1668
- Tracing IP routes 1669
- TABLE 141 IP Trace Details 1670
- Field/Component Description 1671
- Performance Data 1673
- SAN performance measures 1674
- Example of SNMP v1 1677
- Example of setting SNMP v1 1677
- SAN performance overview 1678
- Example of showing FCIP-MIB 1680
- Example of enabling FCIP-MIB 1680
- Example for FC ports 1680
- Example for FCIP tunnels 1680
- Graph display 1683
- Clearing port counters 1684
- • 5 minutes for last 8 days 1688
- Configuring the graph display 1689
- Filtering data by ports 1690
- Filtering data by time 1690
- Performance database views 1693
- Performance counters 1695
- SAN end-to-end monitoring 1696
- SAN Top Talker monitoring 1700
- Pausing a Top Talker monitor 1704
- Bottleneck detection 1705
- How bottlenecks are reported 1706
- FL_Port bottleneck 1711
- FIGURE 735 Threshold example 1713
- Assigning a threshold policy 1716
- Deleting a threshold policy 1717
- SAN connection utilization 1718
- • Press CTRL + U 1719
- IP configuration requirements 1721
- Adding measures to products 1725
- Adding measures to ports 1726
- Removing measures from ports 1727
- • 5 minutes 1730
- • 30 minutes 1730
- • 2 hours 1730
- Configuring graph options 1731
- FIGURE 746 Data points graph 1732
- Exporting a graph 1733
- Printing a graph 1734
- Editing system collectors 1735
- • Click Add 1746
- Deleting an expression 1747
- SAN FCIP tunnel display 1749
- Mouse functions for graphs 1752
- MIB data collectors 1753
- IP Custom performance reports 1753
- Creating a custom report 1754
- Up to 2 years 1 day 1756
- IP sFlow configuration 1760
- TABLE 147 Interface Payload 1761
- Creating custom sFlow reports 1764
- 3. Click Add 1775
- Selecting a report 1779
- • Disable a port 1780
- • Enable a port 1780
- Include Remaining Talkers 1781
- Date and time 1781
- Viewing top MAC talkers 1782
- Viewing top VLAN talkers 1783
- ID of the well-known port 1785
- Viewing IPv4 – Others 1789
- Viewing IPv6 Top Talkers 1789
- Valid TCP flags report 1792
- Viewing BGP paths report 1793
- IP traffic accounting 1794
- Flow Vision 1797
- Supported port types 1798
- Flow Vision terminology 1798
- Flow Vision features 1799
- Flow Vision flows 1799
- Flow definitions 1800
- Flow frame type parameters 1801
- Supported flow parameters 1802
- Number of supported flows 1803
- Learned flows 1803
- Monitoring flows 1805
- Resetting flow statistics 1807
- Activating flows 1808
- Deactivating flows 1808
- Deleting flows 1808
- Flow Monitor 1809
- Flow Monitor limitations 1810
- Configuring a learned flow 1826
- • Feature — Monitor 1827
- • Direction — Bidirectional 1827
- FIGURE 798 FC router fabric 1837
- Flow Generator 1848
- Flow Generator limitations 1849
- SIM-Ports 1850
- Enabling SIM-Port mode 1851
- Disabling SIM-Port mode 1852
- Column Information Displayed 1858
- Flow Mirror 1860
- FIGURE 804 Mirror flow 1861
- Flow Mirror limitations 1862
- • CPU Mirroring 1863
- • Local Flow Mirror 1863
- Monitoring a Flow Mirror flow 1865
- Tracking SCSI commands 1871
- • Static Flow 1875
- • Aggregated Flow 1875
- • Frame TYpe Monitoring 1875
- • LUN Monitoring 1875
- FIGURE 808 Sample Add Flow 1876
- Replacing Top Talker monitors 1891
- Replacing End-to-End monitors 1891
- Frame Monitor 1893
- Frame Monitoring requirements 1894
- Editing a frame monitor 1897
- Power Center 1901
- Data monitoring 1902
- Viewing PoE data for ports 1903
- Filtering port details 1904
- Viewing PoE charts 1907
- Refreshing PoE data 1910
- PoE power on demand 1911
- Schedule_Name 1920
- PoE thresholds 1922
- Adding a PoE port threshold 1924
- Viewing PoE thresholds 1926
- Updating a PoE threshold 1927
- Enabling PoE thresholds 1928
- Disabling PoE thresholds 1928
- Viewing PoE performance 1929
- • Allocation (W) 1930
- • Allocation % 1930
- • Consumption % 1932
- Policy Monitor 1935
- Fabric policy monitors 1936
- Icon Description 1943
- Configuration rules 1953
- Adding a configuration rule 1957
- Editing a configuration rule 1959
- Deleting a configuration rule 1961
- Selecting a product 1963
- Predefined conditions 1965
- Adding a configuration block 1968
- Predefined blocks 1971
- Policy_Name 1972
- Name — Product name 1976
- Fault Management 1979
- Event notification 1980
- Defining filters 1982
- SNMP traps 1985
- SNMP trap forwarding 1987
- Adding a trap destination 1988
- Adding a new trap filter 1989
- Event reception 1991
- Adding an SNMP v3 credential 1993
- Trap customization 1995
- Registering traps 1996
- • Information about the trap 1997
- SNMP informs 1998
- Adding a syslog recipient 1999
- Removing a syslog recipient 2000
- Syslog forwarding 2000
- Adding a syslog filter 2002
- Snort message forwarding 2003
- Event action definitions 2004
- Configuring varbind filters 2006
- Editing event actions 2011
- Special events handling 2014
- Acknowledging special events 2014
- Pseudo events 2020
- Setting pseudo event policies 2021
- Filtering pseudo event traps 2022
- Event custom reports 2031
- Defining report settings 2032
- Defining the report identity 2034
- 4. Click the Filter tab 2036
- Editing a report definition 2039
- Event custom report schedules 2040
- Event logs 2043
- Copying an entire log entry 2044
- Exporting the entire log 2044
- TABLE 172 Event Properties 2046
- Copying the entire Master Log 2047
- Exporting the Master Log 2047
- The “unnamed” filter 2050
- The “none” filter 2050
- Editing a filter 2050
- Duplicating a filter 2050
- Deleting a filter 2050
- Notes on filters 2051
- Packet Capture (Pcap) 2053
- C:\\SNORT\bin\SNORT.exe -c 2054
- Supported hardware 2056
- MAPS license requirements 2056
- Enabling MAPS on a device 2057
- High availability 2058
- Admin Domains 2058
- Fabric Watch 2058
- MAPS structural elements 2062
- MAPS monitoring categories 2065
- • The port has gone offline 2066
- • The port has come online 2066
- • The port is faulty 2066
- Measure Description 2067
- Fabric monitoring category 2068
- FRU monitoring category 2069
- Security monitoring category 2070
- Resource monitoring category 2070
- FCIP monitoring category 2071
- FPI monitoring category 2072
- MAPS policies 2073
- Fabric Watch legacy policies 2074
- MAPS rules 2075
- MAPS conditions 2075
- MAPS actions 2076
- Viewing MAPS policy data 2080
- Configuring a MAPS policy 2082
- Editing a MAPS policy 2085
- Cloning a MAPS policy 2085
- Importing Flow definitions 2086
- Removing imported Flows 2087
- Activating a MAPS policy 2087
- Exporting a MAPS policy 2089
- Importing a MAPS policy 2089
- Deleting a MAPS policy 2089
- Viewing MAPS policy rules 2090
- Comparing MAPS policies 2092
- MAPS groups 2093
- Pre-configured group 2094
- User-defined groups 2095
- Configuring a group 2095
- Editing a group 2097
- Deleting a group 2099
- Fabric/Device_Name 2100
- Creating multiple groups 2101
- Editing multiple groups 2101
- MAPS violations 2103
- MAPS events 2105
- Event field Description 2107
- Dashboard MAPS widgets 2108
- Master Log 2108
- Technical Support 2109
- Device technical support 2113
- Field Description 2119
- FTP server 2122
- Upload failure data capture 2123
- Reports overview 2127
- SAN report types 2128
- Generating SAN reports 2128
- Viewing SAN reports 2129
- Fabric Summary Report 2130
- Fabric Ports Report 2132
- Exporting SAN reports 2133
- Printing SAN reports 2134
- Deleting SAN reports 2134
- Generating SAN zoning reports 2136
- IP report types 2137
- Viewing IP reports 2138
- • Select E-mail as HTML 2139
- • Select E-mail as CSV 2139
- IP Wired Products report 2140
- Detailed Product Report 2141
- Detailed Cluster Report 2145
- AP Products report 2148
- Module List report 2149
- Port VLAN report 2150
- Layer 3 VLAN report 2150
- IP Subnet List report 2151
- IP Address List report 2151
- MAC Address List report 2152
- Deployment reports 2154
- Preconfigured reports 2155
- User-defined reports 2155
- Viewing a report 2157
- Importing a report template 2158
- Exporting a report template 2158
- Deleting reports 2158
- Report content and functions 2159
- Products List report 2160
- Ports Tx/Rx Ratio report 2165
- Low Traffic Ports report 2167
- Host adapter reports 2168
- Adapters Inventory report 2169
- Adapters Faulty SFP report 2170
- Application menus 2173
- SAN main menus 2174
- IP main menus 2184
- SAN shortcut menus 2190
- IP shortcut menus 2206
- Call Home Event Tables 2211
- TABLE 212 # Thermal Events 2212
- TABLE 213 Fabric OS Events 2212
- TABLE 214 IP Call Home Event 2213
- Network OS Call Home Event 2214
- Event Categories 2215
- Product audit events 2216
- Security events 2217
- User action events 2218
- Management server events 2218
- Product events 2219
- RASLog Events 2219
- User Privileges 2223
- About user privileges 2224
- • Fabric Ports 2229
- • Fabric Summary 2229
- IP privileges and behavior 2236
- • viewing and editing 2242
- • selecting storage 2242
- • initiating manual 2242
- About Roles and Access Levels 2245
- Device Properties 2251
- TABLE 224 Fabric properties 2252
- Viewing SAN device properties 2253
- Device properties (Continued) 2254
- • FC Ports 2255
- • GigE Ports 2255
- • IP Ports 2255
- • iSCSI Ports 2255
- • Virtual Sessions Ports 2255
- Viewing storage properties 2256
- Viewing iSCSI properties 2258
- TABLE 227 iSCSI Properties 2259
- Viewing port properties 2260
- TABLE 228 Port properties 2261
- • Authentication Algorithm 2262
- • Encryption Algorithm 2262
- • Diffie-Hellman 2262
- • SA Life 2262
- Port properties (Continued) 2263
- • IP Ping 2264
- • IP Traceroute 2264
- • IP Performance 2264
- Viewing VC module properties 2265
- TABLE 229 Properties tab 2266
- TABLE 230 Port tab 2266
- TABLE 231 NPIV WWNs tab 2266
- IP device properties 2267
- • Fabric 2270
- • Stacking 2270
- • Peri Port 2270
- Viewing VCS fabric properties 2271
- VCS fabric properties 2272
- • Created 2273
- • Activated 2273
- • Associated 2273
- • Applied 2273
- Host properties 2279
- 3. Click OK to close 2282
- Properties customization 2283
- Editing a property field 2284
- Deleting a property field 2284
- Regular Expressions 2287
- TABLE 2 Character classes 2288
- TABLE 1 Characters 2288
- TABLE 7 Boundary matches 2289
- TABLE 8 Greedy quantifiers 2290
- TABLE 9 Reluctant quantifiers 2290
- TABLE 11 Logical operators 2290
- TABLE 12 Back references 2291
- CLI Templates 2293
- MCT Cluster Creation 2297
- MCT Cluster Deployment 2297
- MCT Cluster Undeployment 2297
- TABLE 31 MCT Cluster Deletion 2298
- TABLE 32 MCT Client Creation 2298
- TABLE 33 MCT Client Deletion 2298
- MPLS – Endpoint Configuration 2299
- Troubleshooting 2311
- Browser troubleshooting 2312
- Problem Resolution 2313
- Discovery troubleshooting 2314
- FICON troubleshooting 2315
- Launch Client troubleshooting 2317
- Names troubleshooting 2319
- Patch troubleshooting 2320
- Performance troubleshooting 2321
- Port Fencing troubleshooting 2325
- Server troubleshooting 2325
- Supportsave troubleshooting 2327
- View All list troubleshooting 2328
- Wireless troubleshooting 2329
- Zoning troubleshooting 2329
- Database Fields 2331
- TABLE 19 ACH_EVENT_FILTER_MAP 2332
- TABLE 20 ACH_FILTER 2332
- TABLE 21 ACH_INFO 2332
- TABLE 22 AD_GROUP 2332
- TABLE 26 AOR_DEVICE_GROUP_MAP 2333
- TABLE 34 BIRTREPORT_PARAMETER 2335
- • 1 indicates PDF 2336
- • 2 indicates CSV 2336
- Database tables and fields 2337
- BIRTREPORT_SCHEDULE_PARAMETER 2337
- BIRTREPORT_SCHEDULE_TEMPLATE 2337
- BIRTTEMPLATE_PARAMETER 2337
- BOOT_IMAGE_DRIVER_MAP 2337
- TABLE 42 BOOT_LUN_SEQUENCE 2338
- TABLE 44 CAPABILITY_ 2338
- TABLE 45 CARD 2338
- TABLE 45 CARD (Continued) 2339
- • 0 - 1G 2340
- • 1 - 10G 2340
- • 2 - Dual mode 2340
- • 3 - Failover mode 2340
- TABLE 50 CEE_PORT 2341
- TABLE 51 CFG_BACKUP_ARCHIVE 2341
- TABLE 52 CHANGELOG 2342
- TABLE 53 CLI_TEMPLATE 2342
- TABLE 54 CLIENT_VIEW 2343
- TABLE 55 CLIENT_VIEW_COLUMN 2344
- TABLE 56 CLIENT_VIEW_MEMBER 2344
- TABLE 58 CLUSTER 2344
- TABLE 59 CLUSTER_MEMBER 2344
- TABLE 60 CNA_ETH_PORT 2345
- TABLE 62 CNA_ETH_PORT_CONFIG 2345
- TABLE 63 CNA_PORT 2346
- TABLE 64 COLLECTOR 2346
- TABLE 68 CONFIG_BLOCK 2347
- TABLE 69 CONFIG_CONDITION 2348
- TABLE 70 CORE_SWITCH 2348
- CORE_SWITCH (Continued) 2349
- TABLE 72 CORE_SWITCH_CHECKSUM 2350
- TABLE 74 CORE_SWITCH_DETAILS 2350
- • 1 is supported 2351
- • 0 is not supported 2351
- TABLE 75 CRYPTO_HOST 2352
- TABLE 76 CRYPTO_LUN 2353
- CRYPTO_LUN (Continued) 2354
- TABLE 77 CRYPTO_SWITCH 2355
- CRYPTO_TARGET_CONTAINER 2356
- CRYPTO_SWITCH (Continued) 2356
- TABLE 80 DASHBOARD 2357
- TABLE 81 DASHBOARD_CANVAS 2358
- TABLE 83 DASHBOARD_PROVIDER 2358
- TABLE 84 DASHBOARD_WIDGET 2359
- TABLE 86 DEFAULT_FAVORITES 2360
- DEFAULT_WIDGET_PREFERENCE 2361
- DEPLOYMENT_CONFIGURATION 2361
- DEFAULT_FAVORITES (Continued) 2361
- • 1-Presnapshot 2362
- • 2-Postsnapshot 2362
- • 3-Pre & Post snapshot 2362
- TABLE 92 DEPLOYMENT_STATUS 2363
- TABLE 94 DEVICE 2364
- TABLE 94 DEVICE (Continued) 2365
- TABLE 95 DEVICE_CONNECTION 2370
- TABLE 96 DEVICE_ENCLOSURE 2371
- DEVICE_ENCLOSURE_MEMBER 2372
- DEVICE_ENCLOSURE (Continued) 2372
- TABLE 98 DEVICE_FDMI_DETAILS 2373
- TABLE 99 DEVICE_GROUP 2373
- TABLE 100 DEVICE_GROUP_ENTRY 2374
- TABLE 101 DEVICE_GROUP 2374
- TABLE 103 DEVICE_NODE 2374
- TABLE 104 DEVICE_PORT 2375
- TABLE 107 DISK_USAGE 2377
- TABLE 108 ENCRYPTION_ENGINE 2377
- ENCRYPTION_ENGINE (Continued) 2378
- TABLE 109 ENCRYPTION_GROUP 2379
- ENCRYPTION_GROUP (Continued) 2380
- ENCRYPTION_GROUP_MEMBER 2381
- ENCRYPTION_KMIP_PARAMETERS 2381
- ENCRYPTION_TAPE_POOL 2381
- TABLE 113 ETHERNET_CLOUD 2382
- TABLE 114 ETHERNET_ISL 2382
- TABLE 115 EVENT 2382
- TABLE 115 EVENT (Continued) 2383
- TABLE 116 EVENT_CALL_HOME 2384
- TABLE 117 EVENT_CATEGORY 2384
- TABLE 118 EVENT_DESCRIPTION 2384
- TABLE 119 EVENT_DETAILS 2384
- TABLE 120 EVENT_FWD_FILTER 2385
- TABLE 121 EVENT_INSTANCE 2385
- TABLE 122 EVENT_MODULE 2386
- TABLE 123 EVENT_NOTIFICATION 2386
- TABLE 124 EVENT_ORIGIN 2387
- TABLE 125 EVENT_POLICY 2387
- TABLE 127 EVENT_PROCESSOR_MAP 2388
- TABLE 128 EVENT_RULE 2389
- TABLE 129 EVENT_RULE_ACTION 2389
- TABLE 130 FABRIC 2390
- TABLE 130 FABRIC (Continued) 2391
- TABLE 131 FABRIC_CHECKSUM 2392
- TABLE 132 FABRIC_COLLECTION 2392
- TABLE 135 FABRIC_MEMBER 2393
- TABLE 139 FAVORITES 2394
- TABLE 142 FCIP_TUNNEL 2395
- FCIP_TUNNEL (Continued) 2396
- FCIP_TUNNEL_CIRCUIT 2398
- FCIP_TUNNEL_PERFORMANCE 2401
- TABLE 145 FCOE_DEVICE 2402
- TABLE 146 FCR_ROUTE 2402
- TABLE 147 FEATURE 2402
- TABLE 148 FEATURE_EDITION_MAP 2402
- TABLE 149 FEATURES_USAGE 2402
- TABLE 150 FICON_DEVICE_PORT 2403
- TABLE 153 FOUNDRY_DEVICE 2404
- TABLE 154 FOUNDRY_MODULE 2404
- TABLE 157 FPORT_TRUNK_GROUP 2405
- TABLE 158 FPORT_TRUNK_MEMBER 2405
- TABLE 159 FRU 2406
- TABLE 160 FTP_SERVER 2407
- TABLE 161 GENERATED_REPORT 2407
- TABLE 159 FRU (Continued) 2407
- TABLE 162 GIGE_PORT 2408
- TABLE 164 GIGE_PORT_STATS 2409
- TABLE 165 GLOBAL_VLAN 2409
- TABLE 167 HA_CLUSTER 2410
- TABLE 168 HBA 2410
- TABLE 168 HBA (Continued) 2411
- • HBA/CNA/AnyIO/Mezzanine 2412
- • 0 - Unknow 2413
- • 1 - Yes 2413
- • 2 - No 2413
- TABLE 171 HBA_PORT_DETAIL 2414
- HBA_PORT_DETAIL (Continued) 2415
- HBA_PORT_DEVICE_PORT_MAP 2416
- HBA_PORT_FCOE_DETAILS 2416
- TABLE 174 HBA_REMOTE_PORT 2418
- HBA_REMOTE_PORT_LUN 2419
- HBA_REMOTE_PORT (Continued) 2419
- TABLE 176 HBA_TARGET 2420
- TABLE 177 HEALTH_STATUS 2420
- HOST_DISCOVERY_OPTIONS 2421
- HOST_DISCOVERY_REQ_GROUP 2422
- HOST_DISCOVERY_REQUEST 2422
- HOST_DISCOVERY_REQUESTS 2423
- HYPER_V_VIRTUAL_MACHINE 2423
- TABLE 186 IFL 2424
- TABLE 187 IFL_CONNECTION 2424
- TABLE 188 INTERFACE 2425
- TABLE 190 IP_DEVICE_LICENSE 2426
- TABLE 191 IP_INTERFACE 2427
- TABLE 192 IP_PORT_GROUP 2427
- TABLE 193 IP_ROUTE 2427
- TABLE 194 IP_SUBNET_VLAN 2428
- TABLE 195 IPX_NETWORK_VLAN 2428
- TABLE 196 ISL 2428
- • 0 denotes present 2429
- • 0 denotes untrusted 2429
- • 1 denotes trusted 2429
- TABLE 198 ISL_TRUNK_GROUP 2430
- TABLE 197 ISL_CONNECTION 2430
- TABLE 199 ISL_TRUNK_MEMBER 2431
- TABLE 200 KEY_VAULT 2431
- • 0 = Standard 2432
- • 1= Extended 2432
- • 1 = Clear stats is enabled 2432
- TABLE 205 L2_NEIGHBOR 2433
- TABLE 208 LAG 2434
- TABLE 209 LAG_MEMBER 2435
- TABLE 208 LAG (Continued) 2435
- TABLE 212 LICENSE 2436
- TABLE 214 LICENSE_FEATURE_MAP 2437
- TABLE 215 LICENSE_RULE 2437
- TABLE 216 LICENSED_FEATURE 2437
- TABLE 217 LINK 2438
- TABLE 218 LOCK 2438
- TABLE 219 LSAN_DEVICE 2438
- TABLE 220 LSAN_TAG_CONFIG 2438
- TABLE 221 LSAN_PROXY_DEVICE 2439
- TABLE 222 LSAN_ZONE 2439
- TABLE 223 LSAN_ZONE_DB_CONFIG 2439
- TABLE 224 LSAN_ZONE_MEMBER 2439
- TABLE 225 MCT_CLIENT 2439
- • Deployed(0) 2440
- • Undeployed(1) 2440
- TABLE 229 MAC_GROUP 2441
- TABLE 230 MAC_GROUP_MEMBER 2441
- TABLE 231 MANAGED_ELEMENT 2441
- TABLE 232 MAPS_EVENT 2442
- TABLE 233 MAPS_EVENT_DETAILS 2442
- TABLE 235 MAPS_POLICY 2443
- TABLE 236 MARCHING_ANTS 2443
- TABLE 237 MEASURE 2443
- TABLE 238 MESSAGE_RECIPIENT 2444
- TABLE 239 MIGRATION_HISTORY 2444
- TABLE 237 MEASURE (Continued) 2444
- TABLE 240 MODULE 2445
- TABLE 241 MODULE_SLOT_PRESENT 2446
- TABLE 242 MPLS_ADMIN_GROUP 2446
- TABLE 240 MODULE (Continued) 2446
- TABLE 244 MPLS_LSP 2447
- TABLE 245 MPLS_PATH 2447
- TABLE 246 MPLS_PATH_HOP 2447
- TABLE 247 MPLS_RSVP_LSP 2448
- MPLS_RSVP_LSP_ADMIN_GROUP 2449
- MPLS_RSVP_LSP_FRR_PARAMETERS 2449
- TABLE 253 MPLS_RSVP_LSP_PATH 2450
- TABLE 255 MPLS_SERVICE 2451
- MPLS_SERVICE_PEER_RELATION 2452
- TABLE 259 MRP_RING 2453
- TABLE 260 MRP_RING_DEVICE 2453
- TABLE 261 N2F_PORT_MAP 2454
- TABLE 262 NETWORK_VLAN 2454
- TABLE 263 NETWORK_SCOPE_TYPE 2455
- TABLE 264 NIC_PROFILE 2455
- TABLE 265 NPORT_WWN_MAP 2455
- TABLE 266 NP_FLOW_DEFINITION 2455
- TABLE 267 NP_SUB_FLOW 2456
- TABLE 269 OUI_VENDOR 2457
- • device level collector is 0 2458
- • port level collector is 1 2458
- TABLE 273 PBR_NEXT_HOP 2459
- TABLE 274 PBR_POLICY 2459
- TABLE 275 PBR_RULE 2459
- TABLE 276 PBR_RULE_ACL_LIST 2459
- TABLE 277 PHANTOM_PORT 2460
- TABLE 278 PHYSICAL_DEVICE 2460
- TABLE 279 PHYSICAL_INTERFACE 2461
- TABLE 280 PHYSICAL_PORT 2462
- TABLE 284 PM_DASHBOARD_WIDGET 2463
- TABLE 285 PM_DATA_COLLECTOR 2464
- TABLE 286 PM_MEASURE 2465
- • 0 = product level 2467
- • 1 = port level 2467
- • 0 = disabled 2467
- • 1 = enabled 2467
- TABLE 296 POE_THRESHOLD_EVENT 2468
- TABLE 297 POLICY_RULE 2468
- TABLE 298 POLICY_RULE_MAP 2468
- PORT_BOTTLENECK_CONFIG 2469
- PORT_BOTTLENECK_STATUS 2469
- PORT_COMMISSION_CIMOM_SERVER 2469
- TABLE 302 PORT_FENCING_POLICY 2470
- TABLE 304 PORT_PROFILE 2471
- TABLE 305 PORT_PROFILE_DOMAIN 2471
- PORT_PROFILE_QOS_PFC_MAP 2473
- PORT_PROFILE_VLAN_MAP 2473
- PORT_PROFILE_QOS_MAP 2473
- • 0 = Disabled 2474
- • 1 = Enabled 2474
- TABLE 313 PRIVILEGE 2475
- TABLE 314 PRODUCT_APP 2475
- TABLE 315 PROTOCOL_VLAN 2476
- TABLE 316 QRTZ_BLOB_TRIGGERS 2476
- TABLE 317 QRTZ_CALENDARS 2476
- TABLE 318 QRTZ_CRON_TRIGGERS 2476
- TABLE 319 QRTZ_FIRED_TRIGGERS 2476
- TABLE 320 QRTZ_JOB_DETAILS 2477
- TABLE 321 QRTZ_JOB_LISTENERS 2477
- TABLE 322 QRTZ_LOCKS 2477
- QRTZ_PAUSED_TRIGGER_GRPS 2478
- QRTZ_SCHEDULER_STATE 2478
- QRTZ_SIMPLE_TRIGGERS 2478
- QRTZ_SIMPROP_TRIGGERS 2478
- TABLE 328 QRTZ_TRIGGERS 2479
- TABLE 331 RAS_LOG 2480
- TABLE 332 RECIPIENT_TYPE 2480
- TABLE 334 REPORT_TYPE 2480
- TABLE 335 REPORT_TEMPLATE 2481
- • 0= Not Hidden 2482
- • 1= Hidden 2482
- TABLE 344 RULE_CONDITION_MAP 2483
- TABLE 346 SAN 2483
- TABLE 347 SAN_CONNECTION 2483
- TABLE 348 SCOM_HOST 2484
- TABLE 349 SECURITY_POLICY 2484
- TABLE 351 SENSOR 2485
- TABLE 352 SFLOW_CHECKPOINT 2486
- TABLE 353 SFLOW_HOUR_SUMMARY 2486
- TABLE 351 SENSOR (Continued) 2486
- • 0 means its edge port 2488
- • 1 means its trill port 2488
- TABLE 358 SFLOW_MINUTE_MAC 2489
- TABLE 361 SFLOW_MINUTE_VLAN 2490
- • 1 means its fabric port 2491
- SFLOW_STAGING (Continued) 2492
- TABLE 366 SFLOW_STAGING_SLNUM 2493
- TABLE 367 SMART_CARD 2493
- • 1-Pre snapshot 2494
- • 2-Post snapshot 2494
- TABLE 371 SNMP_DATA 2495
- TABLE 372 SNMP_DATA_1DAY 2496
- TABLE 373 SNMP_DATA_2HOUR 2496
- TABLE 374 SNMP_DATA_30MIN 2497
- TABLE 375 SNMP_EXPR_DATA 2497
- TABLE 378 SNMP_EXPRESSION 2498
- TABLE 379 SNMP_PROFILE 2498
- SNMP_PROFILE (Continued) 2499
- TABLE 383 SSL_CERTIFICATE 2500
- TABLE 385 SSL_KEY 2501
- TABLE 386 SSL_KEY_PASSWORD 2502
- TABLE 387 STATS_AGING 2502
- TABLE 388 STP_PORT 2502
- TABLE 385 SSL_KEY (Continued) 2502
- TABLE 389 STP_INSTANCE 2503
- • 0 - Disabled 2504
- • 1 - Enabled 2504
- • CEE_RUNNING=1 2505
- • CEE_STARTUP=2 2505
- • INVALID=-1 2505
- TABLE 393 SWITCH_LICENSE 2506
- TABLE 394 SWITCH_MODEL 2506
- TABLE 395 SWITCH_PORT 2507
- SWITCH_PORT (Continued) 2508
- SWITCH_PORT_PERFORMANCE 2511
- TABLE 399 SYSTEM_PROPERTY 2512
- TABLE 400 TARGET_TYPE 2513
- TABLE 401 THIRD_PARTY_DEVICE 2513
- TABLE 402 THRESHOLD_MEASURE 2513
- TABLE 403 THRESHOLD_POLICY 2513
- TABLE 404 TIME_SERIES_DATA 2513
- TIME_SERIES_DATA_1DAY 2514
- TIME_SERIES_DATA_2HOUR 2514
- TIME_SERIES_DATA (Continued) 2514
- TABLE 408 TIME_SERIES_DATA_1 2515
- TIME_SERIES_DATA_1_1DAY 2516
- TIME_SERIES_DATA_1_2HOUR 2516
- TABLE 412 TIME_SERIES_DATA_2 2517
- TIME_SERIES_DATA_2_1DAY 2518
- TIME_SERIES_DATA_2_2HOUR 2519
- TIME_SERIES_DATA_2_30MIN 2519
- TABLE 416 TIME_SERIES_DATA_3 2520
- TIME_SERIES_DATA_3_2HOUR 2521
- TIME_SERIES_DATA_3_30MIN 2521
- TABLE 420 TIME_SERIES_DATA_4 2522
- TIME_SERIES_DATA_4_1DAY 2523
- TIME_SERIES_DATA_4_2HOUR 2523
- TABLE 424 TIME_SERIES_DATA_5 2524
- TIME_SERIES_DATA_5_30MIN 2525
- TABLE 426 TOOL_APP 2526
- TABLE 427 TOOL_PATH 2526
- TABLE 428 TOPO_MAP_IMAGE 2526
- TABLE 429 TRILL 2526
- TABLE 430 TRILL_TRUNK_GROUP 2527
- TABLE 431 TRILL_TRUNK_MEMBER 2527
- TABLE 433 TRUNK_GROUP_MEMBER 2527
- • 0=Disabled 2528
- • 1=Enabled 2528
- USER_DEFINED_DEVICE_DETAIL 2529
- USERDEFINED_NETWORK_SCOPE 2529
- TABLE 439 USER_PREFERENCE 2530
- TABLE 442 USER_RESOURCE_MAP 2530
- TABLE 443 USER_ROLE_MAP 2530
- TABLE 444 USER_STATE_MAP 2531
- TABLE 445 V_PORT_DETAIL 2531
- TABLE 446 VCN_ICL 2531
- TABLE 447 VCN_MEMBER 2531
- • Disabled(0) 2532
- • Enabled(1) 2532
- TABLE 450 VCEM_PROFILE 2533
- TABLE 451 VIP_SERVER 2533
- TABLE 452 VIP_SERVER_BINDING 2534
- TABLE 454 VIRTUAL_FCOE_PORT 2534
- VIRTUAL_FCOE_PORT_MAC_MEMBER 2535
- VIRTUAL_FCOE_PORT_STAT 2535
- VIRTUAL_FCOE_PORT (Continued) 2535
- • 1-Enabled 2536
- • 0-disabled 2536
- VIRTUAL_SWITCH (Continued) 2537
- TABLE 472 VMOTION_EVENT 2543
- TABLE 474 VM_DATA_CENTER 2544
- TABLE 476 VM_DV_PORT 2545
- TABLE 477 VM_DV_PORT_GROUP 2546
- TABLE 478 VM_DV_SWITCH 2547
- TABLE 480 VM_FC_HBA 2548
- • Point to point 2549
- • Unknown 2549
- VM_HOST_END_DEV_CONNECTIVITY 2550
- VM_HOST_PROXY_SWITCH 2550
- VM_HOST (Continued) 2550
- TABLE 486 VM_HOST_VIRTUAL_NIC 2551
- TABLE 487 VM_NETWORK_SETTINGS 2552
- TABLE 489 VM_PATH 2553
- TABLE 490 VM_PHYSICAL_NIC 2554
- TABLE 489 VM_PATH (Continued) 2554
- TABLE 491 VM_SECURITY_POLICY 2555
- • VMKernel 2556
- • Service Console 2556
- TABLE 495 VM_STORAGE 2557
- TABLE 498 VM_VCENTER 2558
- TABLE 499 VM_VCENTER_MEMBER 2559
- TABLE 501 VM_VIRTUAL_MACHINE 2561
- VPLS_DEVICE_RELATION 2562
- VPLS_ENDPOINT_RELATION 2562
- TABLE 505 VR_CONN_DOMAIN 2563
- TABLE 508 VR_CONN_MODULE 2564
- TABLE 509 VR_CONN_MODULE_PORT 2564
- TABLE 511 VR_CONN_WWN 2565
- TABLE 514 WT_ARCHIVE 2566
- TABLE 515 ZONE 2566
- TABLE 516 ZONE_ALIAS 2567
- TABLE 517 ZONE_ALIAS_IN_ZONE 2567
- TABLE 518 ZONE_ALIAS_MEMBER 2567
- TABLE 519 ZONE_DB 2567
- TABLE 520 ZONE_DB_CONFIG 2568
- TABLE 521 ZONE_DB_CONTENT 2568
- TABLE 522 ZONE_DB_USERS 2568
- TABLE 523 ZONE_IN-ZONE_SET 2568
- TABLE 524 ZONE_MEMBER 2568
- ADAPTER_PORT_CONFIG_INFO 2569
- AG_CONNECTION_INFO 2569
- BIRTREPORT_SCHEDULE_INFO 2570
- BOOT_IMAGE_FILE_DETAILS_INFO 2571
- CNA_ETH_PORT_CONFIG_INFO 2571
- CNA_PORT_DETAILS_INFO 2572
- CNA_PORT_INFO 2572
- CORE_SWITCH_DETAILS_INFO 2573
- CRYPTO_HOST_LUN_INFO 2574
- CRYPTO_TARGET_ENGINE_INFO 2575
- DASHBOARD_PREFERENCES_INFO 2575
- DEPLOYMENT_INFO 2576
- DEPLOYMENT_LOG 2577
- DEVICE_CONNECTION_INFO 2577
- EE_MONITOR_STATS_5MIN_INFO 2578
- EE_MONITOR_STATS_30MIN_INFO 2578
- EE_MONITOR_STATS_2HOUR_INFO 2578
- EE_MONITOR_STATS_1DAY_INFO 2579
- TE_PORT_STATS_5MIN_INFO 2579
- TE_PORT_STATS_30MIN_INFO 2580
- TE_PORT_STATS_2HOUR_INFO 2580
- TE_PORT_STATS_1DAY_INFO 2580
- SWITCH_INFO 2581
- SWITCH_REPORT_INFO 2583
- DEVICE_INFO 2585
- N2F_PORT_MAP_INFO 2586
- DEVICE_NODE_INFO 2587
- DEVICE_PORT_INFO 2588
- DEVICE_REPORT_INFO 2589
- DEV_PORT_GIGE_PORT_LINK_INFO 2590
- DEV_PORT_MAC_ADDR_MAP_INFO 2590
- ISL_CONNECTION_INFO 2591
- ISL_INFO 2591
- ETHERNET_ISL_INFO 2592
- EVENT_DETAILS_INFO 2593
- EVENT_INFO 2594
- FABRIC_INFO 2595
- FCIP_TUNNEL_CIRCUIT_INFO 2596
- FCIP_TUNNEL_INFO 2597
- FCOE_DEVICE_INFO 2598
- FRU_INFO 2598
- GIGE_PORT_ECLOUD_LINK_INFO 2599
- GIGE_PORT_INFO 2599
- GENERATED_BIRTREPORT_INFO 2600
- HBA_PORT_DETAILS_INFO 2601
- HBA_TARGET_INFO 2603
- HEALTH_STATUS_INFO 2604
- HOST_INVENTORY_REPORT_INFO 2605
- HOST_DISCOVERY_REQUEST_INFO 2608
- HOST_DISCOVERY_REQUESTS_INFO 2609
- IFL_INFO 2611
- IFL_REPORT_INFO 2611
- ISL_REPORT_INFO 2615
- ISL_TRILL_INFO 2617
- ISL_TRUNK_GROUP_MEMBER_INFO 2618
- ISL_TRUNK_INFO 2619
- L2_NEIGHBOR_INFO 2619
- MAPS_EVENT_DETAILS_INFO 2620
- N2F_PORT_MAP_REPORT_INFO 2621
- MODULE_INFO 2624
- NPORT_WWN_MAP_INFO 2626
- PHANTOM_PORT_INFO 2626
- PRODUCT_INFO 2627
- PORT_BOTTLENECK_CONF_INFO 2629
- PORT_BOTTLENECK_STAT_INFO 2629
- PORT_GROUP_INFO 2630
- ROLE_PRIVILEGE_INFO 2630
- PORT_PROFILE_INFO 2631
- PORT_PROFILE_INTERFACE_INFO 2631
- PORT_PROFILE_MAC_INFO 2632
- PORT_VLAN_INFO 2632
- PROTOCOL_VLAN_INFO 2633
- SFLOW_MINUTE_L3_VIEW 2633
- SFLOW_MINUTE_MAC_VIEW 2633
- SCOM_EE_MONITOR_INFO 2634
- SENSOR_INFO 2634
- SMART_CARD_USAGE_INFO 2635
- SWITCH_CONFIG_INFO 2636
- SWITCH_PORT_DETAILS_INFO 2637
- SWITCH_DETAILS_INFO 2642
- SWITCH_DISCOVERED_MAC_INFO 2644
- SWITCH_PORT_INFO 2644
- SWITCH_SNMP_INFO 2646
- TIME_SERIES_DATA_INFO 2648
- TIME_SERIES_DATA_VIEW 2649
- TRILL_INFO 2650
- TRILL_TRUNK_INFO 2651
- USER_ROLE_RESOURCE_INFO 2651
- VIRTUAL_FCOE_PORT_INFO 2652
- VIRTUAL_PORT_WWN_DETAILS_INFO 2652
- VM_ADDRESS_INFO 2653
- VLAN_INT_CLASSIFIER_INFO 2654
- VM_CONNECTIVITY_INFO 2654
- VM_NETWORK_CONNECTIVITY_INFO 2657
- VM_DATASTORE_DETAILS_INFO 2659
- VM_EE_MONITOR_INFO 2659
- VM_HOST_INFO 2660
- VM_LUN_INFO 2661
- VM_STATISTICS_INFO 2661
- VR_CONN_MODULE_INFO 2663
- VR_CONN_MODULE_PORT_INFO 2665
- VR_CONN_NPIV_INFO 2666
- VMM_DISCOVERED_MAC_INFO 2667
- ZONE_DB_INFO 2668
- ZONE_DB_REPORT_INFO 2669
- AP_USAGE 2669
- SFLOW_MINUTE_BGP_VIEW 2669
- SFLOW_MINUTE_VLAN_VIEW 2670
- PHYSICAL_DEVICE_INFO 2670
- SLOT_INFO 2670
- MANAGED_ELEMENT_INFO 2671
- SNMP_DATA_INFO 2671
- SNMP_EXPR_DATA_INFO 2671
- SNMP_DATA_VIEW 2671
- VM_VNETWORK_INFO 2674
- VCS_CLUSTER_MEMBER_INFO 2675
- RESET_VCS_LICENSED 2676
- WIRELESS_INTERFACE 2676
- WIRED_INTERFACE 2677
- CEE_PORT_INFO 2679
- Brocade International 555 2682
- HP LAN 561 2682
Související produkty a manuály pro Software Brocade Network Advisor SAN + IP User Manual v12.3.0
(169 stránky)© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce