Brocade Multi-Service IronWare Routing Configuration Guide Uživatelský manuál stáhnout pdf (Strana 749)

100

101

Multi-Service IronWare Routing Configuration Guide 721

53-1003033-02

Configuring IPv6 specific address family route parameters

Redistributing RIPng routes into IPv6 IS-IS

To redistribute RIPng routes into IPv6 IS-IS, enter the following command at the IPv6 IS-IS unicast

address family configuration level.

Brocade(config-isis-router-ipv6u)# redistribute rip

This command configures the device to redistribute all RIPng routes into Level-2 IS-IS.

internal | route-map name]

The parameters are the same as the parameters for the redistribute static command.

Redistributing OSPF version 3 routes into IPv6 IS-IS

To redistribute OSPFv3 routes into IPv6 IS-IS, enter the following command at the IPv6 IS-IS unicast

address family configuration level.

Brocade(config-isis-router-ipv6u)# redistribute ospf

This command configures the device to redistribute all OSPFv3 routes into Level-2 IPv6 IS-IS.

| metric number | metric-type external | internal | route-map name]

Most of the parameters are the same as the parameters for the redistribute static command.

However, the redistribute ospf command also has the match external1 | external2 | internal

parameter. This parameter specifies the OSPF route type you want to redistribute into IPv6 IS-IS. By

default, the redistribute ospf command redistributes only internal routes:

• external1 – An OSPF type 1 external route.

• external2 – An OSPF type 2 external route.

• internal – An internal route calculated by OSPF.

Redistributing BGP4+ routes into IPv6 IS-IS

To redistribute BGP4+ routes into IPv6 IS-IS, enter the following command at the IPv6 IS-IS unicast

address family configuration level.

Brocade(config-isis-router-ipv6u)# redistribute /jointfilesconvert/1441120/bgp

This command configures the device to redistribute all its BGP4 routes into Level-2 IPv6 IS-IS.

internal | route-map name]

The parameters are the same as the parameters for the redistribute static command.

Redistributing IPv6 IS-IS routes within IPv6 IS-IS

In addition to redistributing routes from other route sources into IPv6 IS-IS, the device can

redistribute Level 1 IPv6 IS-IS routes into Level 2 IPv6 IS-IS routes, and Level 2 IPv6 IS-IS routes into

Level 1 IPv6 IS-IS routes. By default, the device redistributes routes from Level 1 into Level 2.

1 2 ... 744 745 746 747 748 749 750 751 752 753 754 ... 845 846

Komentáře k této Příručce

Žádné komentáře

Brocade Multi-Service IronWare Routing Configuration Guide Uživatelský manuál Strana 749

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Brocade Multi-Service IronWare Routing Configuration Guide