Brocade Network OS NETCONF Operations Guide v4.1.1 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Počítačové příslušenství Brocade Network OS NETCONF Operations Guide v4.1.1. Brocade Network OS NETCONF Operations Guide v4.1.1 User Manual [es] Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 622
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
53-1003231-02
2 April 2014
®
Network OS
NETCONF Operations Guide
Supporting Network OS v4.1.1
Zobrazit stránku 0
1 2 3 4 5 6 ... 621 622

Shrnutí obsahu

Strany 1 - Network OS

53-1003231-022 April 2014®Network OSNETCONF Operations GuideSupporting Network OS v4.1.1

Strany 2 - Document History

x Network OS NETCONF Operations Guide53-1003231-02Configuring a Fibre Channel port for trunking. . . . . . . . . . . . . . . . . . . . 139Retrieving F

Strany 3 - Contents (High Level)

68 Network OS NETCONF Operations Guide53-1003231-02Obtaining the Dynamic POD assignments6Obtaining the Dynamic POD assignmentsTo display the Dynamic P

Strany 4

Network OS NETCONF Operations Guide 6953-1003231-02Overriding Dynamic POD assignments6If all ports are assigned, select a port to release its POD assi

Strany 5 - Contents (Detailed)

70 Network OS NETCONF Operations Guide53-1003231-02Overriding Dynamic POD assignments64. Issue the <get-config> RPC to retrieve the DPOD configu

Strany 6

Network OS NETCONF Operations Guide 7153-1003231-02Overriding Dynamic POD assignments6<tengigabitethernet><name>1/0/10</name><shu

Strany 7

72 Network OS NETCONF Operations Guide53-1003231-02Overriding Dynamic POD assignments6<interface xmlns="urn:brocade.com:mgmt:brocade-interface

Strany 8 - Chapter 9 Metro VCS

Network OS NETCONF Operations Guide 7353-1003231-02Chapter7SNMPIn this chapter•SNMP management with NETCONF overview . . . . . . . . . . . . . . . . .

Strany 9

74 Network OS NETCONF Operations Guide53-1003231-02SNMP community strings7SNMP community stringsSNMP versions 1 and 2c use community strings to restri

Strany 10 - Chapter 13 VMware vCenter

Network OS NETCONF Operations Guide 7553-1003231-02SNMP community strings7Changing the access of a read-only community string To change the access per

Strany 11

76 Network OS NETCONF Operations Guide53-1003231-02Obtaining SNMP user names7<target><running/></target><config><snmp-serve

Strany 12 - Chapter 19 Configuring AMPP

Network OS NETCONF Operations Guide 7753-1003231-02SNMP server hosts7</user><user><username>snmpuser3</username><auth>md

Strany 13 - Chapter 21 Configuring VLANs

Network OS NETCONF Operations Guide xi53-1003231-02Section II Network OS Security ConfigurationChapter 15 Managing User AccountsIn this chapter . . .

Strany 14 - Chapter 22 Configuring VXLANs

78 Network OS NETCONF Operations Guide53-1003231-02SNMP server hosts7<running/></target><config><snmp-server xmlns="urn:broc

Strany 15 - Chapter 25 Configuring UDLD

Network OS NETCONF Operations Guide 7953-1003231-02SNMP server hosts7<running/></target><config><snmp-server xmlns="urn:broc

Strany 16 - Chapter 28 Configuring ACLs

80 Network OS NETCONF Operations Guide53-1003231-02SNMP server hosts7Setting the SNMP server contactTo set the SNMP server contact string, issue the &

Strany 17 - Chapter 29 Configuring QoS

Network OS NETCONF Operations Guide 8153-1003231-02SNMP server hosts7Returning the SNMP configurationTo display the current SNMP configuration for the

Strany 18 - Chapter 32 IP Route Policy

82 Network OS NETCONF Operations Guide53-1003231-02Support for multiple SNMP server contexts7<user><username>snmpuser3</username><

Strany 19 - Chapter 35 Configuring VRRP

Network OS NETCONF Operations Guide 8353-1003231-02Support for password encryption for SNMPv3 users7</rpc-reply>Support for password encryption

Strany 20 - Section V Appendixes

84 Network OS NETCONF Operations Guide53-1003231-02Support for password encryption for SNMPv3 users7

Strany 21

Network OS NETCONF Operations Guide 8553-1003231-02Chapter8FabricIn this chapter•Fabric management with NETCONF overview . . . . . . . . . . . . . . .

Strany 22

86 Network OS NETCONF Operations Guide53-1003231-02Brocade VCS Fabric configuration management8Brocade VCS Fabric configuration managementTo add a new

Strany 23

Network OS NETCONF Operations Guide 8753-1003231-02Fabric interface configuration management8</config></edit-config></rpc><rpc-re

Strany 24

xii Network OS NETCONF Operations Guide53-1003231-02LDAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 25

88 Network OS NETCONF Operations Guide53-1003231-02Fabric interface configuration management8<running/></target><config><interfac

Strany 26

Network OS NETCONF Operations Guide 8953-1003231-02Fabric interface configuration management84. Under the <gigabitethernet>, <tengigabitether

Strany 27 - About This Document

90 Network OS NETCONF Operations Guide53-1003231-02Fabric interface configuration management8</config></edit-config></rpc><rpc-re

Strany 28

Network OS NETCONF Operations Guide 9153-1003231-02Fabric interface configuration management8a. In the <rbridge-id> leaf element, specify the RB

Strany 29 - Document conventions

92 Network OS NETCONF Operations Guide53-1003231-02Fabric interface configuration management8</filter></get-config></rpc><rpc-rep

Strany 30 - Key terms

Network OS NETCONF Operations Guide 9353-1003231-02Fabric interface configuration management8<ok/></rpc-reply>This operation can be used i

Strany 31 - Additional information

94 Network OS NETCONF Operations Guide53-1003231-02Fabric interface configuration management8If you wish to rebind this virtual IP address to this man

Strany 32 - Document feedback

Network OS NETCONF Operations Guide 9553-1003231-02Fabric interface configuration management81. Issue the <edit-config> RPC to configure the <

Strany 33 - Network OS Administration

96 Network OS NETCONF Operations Guide53-1003231-02Fabric interface configuration management8</rpc><rpc-reply message-id="1213" xml

Strany 34

Network OS NETCONF Operations Guide 9753-1003231-02Chapter9Metro VCSIn this chapter•Metro VCS configuration with NETCONF overview. . . . . . . . . . .

Strany 35 - NETCONF Overview

Network OS NETCONF Operations Guide xiii53-1003231-02Configuring a port-profile-port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Strany 36

98 Network OS NETCONF Operations Guide53-1003231-02Configuring Metro VCS using the long-distance-isl element91. Issue the <edit-config> RPC to c

Strany 37 - RPC reply

Network OS NETCONF Operations Guide 9953-1003231-02Configuring Metro VCS using standard ISL9</tengigabitethernet></interface></config&g

Strany 38 - RFC references

100 Network OS NETCONF Operations Guide53-1003231-02Configuring vLAGs for distributed Ethernet Fabrics97. Repeat for all interfaces that must be part

Strany 39 - NETCONF support in Network OS

Network OS NETCONF Operations Guide 10153-1003231-02Chapter10Administering ZonesIn this chapter•Zoning with NETCONF overview . . . . . . . . . . . . .

Strany 40

102 Network OS NETCONF Operations Guide53-1003231-02Default zoning access modes10Zone configurationsA zone configuration is a group of one or more zon

Strany 41 - Basic NETCONF Operations

Network OS NETCONF Operations Guide 10353-1003231-02Zone database size10<rpc message-id="601" xmlns="urn:ietf:params:xml:ns:netconf:

Strany 42 - Server capabilities

104 Network OS NETCONF Operations Guide53-1003231-02Zone aliases10Viewing database size informationTo retrieve database size information, issue the &l

Strany 43 - Retrieving configuration data

Network OS NETCONF Operations Guide 10553-1003231-02Zone aliases10</name-server></show></nca:data></nca:action></rpc><

Strany 44 - Subtree filtering

106 Network OS NETCONF Operations Guide53-1003231-02Zone aliases10Adding additional members to an existing alias1. Issue the <show>/<name-ser

Strany 45

Network OS NETCONF Operations Guide 10753-1003231-02Zone aliases10<edit-config><target><running/></target><config><zo

Strany 46

xiv Network OS NETCONF Operations Guide53-1003231-02Private VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 47 - Retrieving operational data

108 Network OS NETCONF Operations Guide53-1003231-02Zone aliases10<defined-configuration><alias><alias-name>alias1</alias-name>

Strany 48

Network OS NETCONF Operations Guide 10953-1003231-02Zone aliases10</alias-entry-name></member-entry><member-entry xmlns="urn:broca

Strany 49

110 Network OS NETCONF Operations Guide53-1003231-02Zoning information10</member-entry><member-entry><alias-entry-name>10:00:00:00:0

Strany 50 - Editing the configuration

Network OS NETCONF Operations Guide 11153-1003231-02Zoning information10• “Retrieving the defined configuration” on page 111• “Retrieving the enabled

Strany 51 - Managing the configuration

112 Network OS NETCONF Operations Guide53-1003231-02Zoning information10?xml version="1.0" encoding="UTF-8"?><rpc message-id

Strany 52

Network OS NETCONF Operations Guide 11353-1003231-02Zoning information10</member-entry><member-entry><entry-name>11:22:33:44:55:66:7

Strany 53

114 Network OS NETCONF Operations Guide53-1003231-02Zoning information10 <zone-name-pattern>zone1</zone-name-pattern> </show-zon

Strany 54

Network OS NETCONF Operations Guide 11553-1003231-02Zone creation and management10 <enabled-configuration xmlns="urn:brocade.com:mgmt:brocad

Strany 55 - Basic Switch Management

116 Network OS NETCONF Operations Guide53-1003231-02Zone creation and management10<zoning xmlns="urn:brocade.com:mgmt:brocade-zone">&l

Strany 56 - Switch attributes

Network OS NETCONF Operations Guide 11753-1003231-02Zone creation and management10</member-entry></zone></defined-configuration><

Strany 57 - Setting host attributes

Network OS NETCONF Operations Guide xv53-1003231-02Spanning tree configuration and management . . . . . . . . . . . . . . . . . . 338Enabling STP, RST

Strany 58

118 Network OS NETCONF Operations Guide53-1003231-02Zone creation and management10</enabled-configuration></zoning></config></edi

Strany 59 - Rebooting a Brocade switch

Network OS NETCONF Operations Guide 11953-1003231-02Zone configuration management10<cfg-action>cfg-save</cfg-action></enabled-configura

Strany 60

120 Network OS NETCONF Operations Guide53-1003231-02Zone configuration management10</member-zone></cfg></defined-configuration><e

Strany 61 - Replacing an interface module

Network OS NETCONF Operations Guide 12153-1003231-02Zone configuration management10<enabled-configuration><cfg-action>cfg-save</cfg-act

Strany 62

122 Network OS NETCONF Operations Guide53-1003231-02Zone configuration management10</member-zone></cfg></defined-configuration><e

Strany 63

Network OS NETCONF Operations Guide 12353-1003231-02Zone configuration management10<error-tag>Command Failed</error-tag><error-severity

Strany 64 - Configuring a switch banner

124 Network OS NETCONF Operations Guide53-1003231-02Zone configuration management101. Issue an <edit-config> RPC to configure the <zoning>

Strany 65

Network OS NETCONF Operations Guide 12553-1003231-02Zone configuration management10Clearing changes to a zone configurationThis procedure removes all

Strany 66

126 Network OS NETCONF Operations Guide53-1003231-02Zone configuration management10<rpc message-id="624" xmlns="urn:ietf:params:xml:

Strany 67

Network OS NETCONF Operations Guide 12753-1003231-02Zone configuration management101. Empty the transaction buffer by either committing the transactio

Strany 68

xvi Network OS NETCONF Operations Guide53-1003231-02Chapter 26 Configuring Link AggregationIn this chapter . . . . . . . . . . . . . . . . . . . . . .

Strany 69 - </rpc-reply>

128 Network OS NETCONF Operations Guide53-1003231-02Zone configuration scenario10NOTEThis operation adds to the defined configuration. It does not rep

Strany 70 - Syslog server setup

Network OS NETCONF Operations Guide 12953-1003231-02Zone configuration scenario10The following example creates the zone configuration shown in Figure

Strany 71 - Adding syslog servers

130 Network OS NETCONF Operations Guide53-1003231-02Zone configuration scenario10<target><running/></target><config><zoning

Strany 72

Network OS NETCONF Operations Guide 13153-1003231-02Zone configuration scenario10<target><running/></target><filter type="su

Strany 73

132 Network OS NETCONF Operations Guide53-1003231-02Zone configuration scenario10<rpc message-id="632" xmlns="urn:ietf:params:xml:ns

Strany 74 - Removing a syslog server

Network OS NETCONF Operations Guide 13353-1003231-02Chapter11Configuring Fibre Channel PortsIn this chapter•Fibre Channel ports configuration with NET

Strany 75 - RASlog configuration

134 Network OS NETCONF Operations Guide53-1003231-02Fibre Channel port attributes11Fibre Channel port attributesNetwork OS v4.0.0 allows you to config

Strany 76

Network OS NETCONF Operations Guide 13553-1003231-02Retrieving the Fibre Channel port configuration11</interface></filter>To retrieve Fibr

Strany 77 - Audit log configuration

136 Network OS NETCONF Operations Guide53-1003231-02Fibre Channel port activation and deactivation11Fibre Channel port activation and deactivationAn F

Strany 78

Network OS NETCONF Operations Guide 13753-1003231-02Setting Fibre Channel port speed11Disabling a Fibre Channel portTo disable a Fibre Channel port, a

Strany 79 - Network Time Protocol

Network OS NETCONF Operations Guide xvii53-1003231-02IP ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 80 - Time zone settings

138 Network OS NETCONF Operations Guide53-1003231-02Configuring a Fibre Channel port for long distance operation11b. In the <fc-speed-cfg> eleme

Strany 81

Network OS NETCONF Operations Guide 13953-1003231-02Configuring a Fibre Channel port for trunking11Possible values include “l0”, “le”, “ld”, and “ls”.

Strany 82

140 Network OS NETCONF Operations Guide53-1003231-02Retrieving Fibre Channel interface information11This element is defined with type empty. To enable

Strany 83

Network OS NETCONF Operations Guide 14153-1003231-02Retrieving Fibre Channel interface information11<remote-node-wwn>10:79:00:05:22:58:26:73<

Strany 84

142 Network OS NETCONF Operations Guide53-1003231-02Retrieving Fibre Channel interface information11

Strany 85

Network OS NETCONF Operations Guide 14353-1003231-02Chapter12System Monitor ConfigurationIn this chapter•System Monitor configuration with NETCONF ove

Strany 86

144 Network OS NETCONF Operations Guide53-1003231-02FRU monitoring12System Monitor parameters are defined in the brocade-system-monitor, brocade-syste

Strany 87

Network OS NETCONF Operations Guide 14553-1003231-02FRU monitoring12</threshold></fan><power><threshold><marginal-threshold

Strany 88

146 Network OS NETCONF Operations Guide53-1003231-02FRU monitoring12To set FRU state alerts and actions, perform the following steps.1. Issue the <

Strany 89

Network OS NETCONF Operations Guide 14753-1003231-02FRU monitoring12</alert></sfp><LineCard><alert><state>removed</st

Strany 90

xviii Network OS NETCONF Operations Guide53-1003231-02Chapter 30 Configuring 802.1x Port AuthenticationIn this chapter . . . . . . . . . . . . . . . .

Strany 91 - Evaluating a firmware upgrade

148 Network OS NETCONF Operations Guide53-1003231-02Alert notifications12<get-config><source><running/></source><filter typ

Strany 92 - ATTENTION

Network OS NETCONF Operations Guide 14953-1003231-02Alert notifications12Configuring e-mail alertsUse this procedure to configure e-mail recipients of

Strany 93

150 Network OS NETCONF Operations Guide53-1003231-02Alert notifications12To create a mapping:1. Issue the <edit-config> RPC to configure the <

Strany 94

Network OS NETCONF Operations Guide 15153-1003231-02Alert notifications12To change the domain name:<rpc message-id="1107" xmlns="urn

Strany 95

152 Network OS NETCONF Operations Guide53-1003231-02Resource monitoring12Resource monitoringFor a conceptual overview of resource monitoring, refer to

Strany 96

Network OS NETCONF Operations Guide 15353-1003231-02Resource monitoring12</memory></threshold-monitor></threshold-monitor-hidden><

Strany 97 - Administering Licenses

154 Network OS NETCONF Operations Guide53-1003231-02Security monitoring12<rpc-reply message-id="1110" xmlns="urn:ietf:params:xml:ns:

Strany 98 - Obtaining a license key

Network OS NETCONF Operations Guide 15553-1003231-02Security monitoring12Displaying security monitoring default valuesTo display the default values of

Strany 99

156 Network OS NETCONF Operations Guide53-1003231-02Security monitoring12In the <sec-buffer> element, specify the buffer value for in-range beha

Strany 100 - Reserving a port assignment

Network OS NETCONF Operations Guide 15753-1003231-02Interface monitoring12Applying security monitoring policiesThis procedure allows you to toggle bet

Strany 101 - 53-1003231-02

Network OS NETCONF Operations Guide xix53-1003231-02Configuring an IP prefix list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 102

158 Network OS NETCONF Operations Guide53-1003231-02Interface monitoring12Displaying interface monitoring default valuesTo display the default values

Strany 103

Network OS NETCONF Operations Guide 15953-1003231-02Interface monitoring12c. Under the <threshold> node element, include the following leaf elem

Strany 104

160 Network OS NETCONF Operations Guide53-1003231-02Interface monitoring12</alert></area></policy></interface></threshold-m

Strany 105 - In this chapter

Network OS NETCONF Operations Guide 16153-1003231-02Interface monitoring121. Issue the <edit-config> RPC to configure the <threshold-monitor-

Strany 106 - SNMP community strings

162 Network OS NETCONF Operations Guide53-1003231-02Interface monitoring12</rpc><rpc-reply message-id="1123" xmlns="urn:ietf:p

Strany 107

Network OS NETCONF Operations Guide 16353-1003231-02Chapter13VMware vCenter In this chapter•vCenter management with NETCONF overview. . . . . . . . .

Strany 108 - Obtaining SNMP user names

164 Network OS NETCONF Operations Guide53-1003231-02Configuring vCenter13Step 2: Enabling CDP/LLDP In order for an Ethernet Fabric to detect the ESX/E

Strany 109 - SNMP server hosts

Network OS NETCONF Operations Guide 16553-1003231-02Configuring vCenter13<?xml version="1.0" encoding="UTF-8"?><rpc messa

Strany 110

166 Network OS NETCONF Operations Guide53-1003231-02Configuring vCenter13Immediately following first-time vCenter activation, Network OS starts the vi

Strany 111 - Removing the SNMP server host

Network OS NETCONF Operations Guide 16753-1003231-02Chapter14Configuring Remote MonitoringIn this chapter•RMON configuration with NETCONF overview . .

Strany 112

Copyright © 2012-2014 Brocade Communications Systems, Inc. All Rights Reserved.ADX, AnyIO, Brocade, Brocade Assurance, the B-wing symbol, DCX, Fabric

Strany 113

xx Network OS NETCONF Operations Guide53-1003231-02Configuring a multigroup virtual router cluster . . . . . . . . . . . . . . . . . . . 545Configurin

Strany 114

168 Network OS NETCONF Operations Guide53-1003231-02RMON configuration and management14Configuring RMON alarm settingsTo configure RMON alarms and eve

Strany 115

Network OS NETCONF Operations Guide 16953-1003231-02RMON configuration and management14</rpc><rpc-reply message-id="2800" xmlns=&qu

Strany 116

170 Network OS NETCONF Operations Guide53-1003231-02RMON configuration and management14

Strany 117

Network OS NETCONF Operations Guide 17153-1003231-02SectionIINetwork OS Security ConfigurationThis section describes security features, and includes t

Strany 118 - Disabling VCS Fabric mode

172 Network OS NETCONF Operations Guide53-1003231-02

Strany 119 - Enabling a fabric ISL

Network OS NETCONF Operations Guide 17353-1003231-02Chapter15Managing User AccountsIn this chapter•Managing user accounts with NETCONF overview . . .

Strany 120 - Enabling a fabric trunk

174 Network OS NETCONF Operations Guide53-1003231-02User accounts15All modules that pertain to security, for example, user and user roles, RBAC, and p

Strany 121 - Disabling a fabric trunk

Network OS NETCONF Operations Guide 17553-1003231-02User accounts15Creating a user accountThe following example creates a new user account with the mi

Strany 122 - Priorities

176 Network OS NETCONF Operations Guide53-1003231-02User accounts15<name>brcdUser2</name><user-password>Broom6fielD</user-passwor

Strany 123

Network OS NETCONF Operations Guide 17753-1003231-02User accounts151. Issue the <edit-config> RPC to configure the <username> node in the

Strany 124

Network OS NETCONF Operations Guide xxi53-1003231-02Viewing NETCONF client capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . 573Viewi

Strany 125

178 Network OS NETCONF Operations Guide53-1003231-02User accounts15Deleting a user account1. Issue the <edit-config> RPC to configure the <us

Strany 126 - Fabric ECMP load balancing

Network OS NETCONF Operations Guide 17953-1003231-02Role-based access control15</data></rpc-reply>Configuring a user aliasThe global alias

Strany 127

180 Network OS NETCONF Operations Guide53-1003231-02Role-based access control15• The admin role has the highest privileges. All commands available in

Strany 128

Network OS NETCONF Operations Guide 18153-1003231-02Role-based access control15<?xml version="1.0" encoding="UTF-8"?><rpc

Strany 129 - Metro VCS

182 Network OS NETCONF Operations Guide53-1003231-02Command access rules15Deleting a roleTo delete a role, perform the following steps.1. Issue the &l

Strany 130 - Disabling a fabric ISL

Network OS NETCONF Operations Guide 18353-1003231-02Command access rules15Refer to the Network OS Administrator’s Guide for details about how rules ap

Strany 131

184 Network OS NETCONF Operations Guide53-1003231-02Command access rules15The following exception applies. When a match is found for a rule with the r

Strany 132

Network OS NETCONF Operations Guide 18553-1003231-02Command access rules15</edit-config></rpc><rpc-reply message-id="811" xml

Strany 133 - Administering Zones

186 Network OS NETCONF Operations Guide53-1003231-02Command access rules15<index>155</index></rule></config></edit-config&g

Strany 134 - Default zoning access modes

Network OS NETCONF Operations Guide 18753-1003231-02Command access rules15Configuration examplesThe following configuration examples illustrate the st

Strany 135 - Zone database size

xxii Network OS NETCONF Operations Guide53-1003231-02

Strany 136 - Zone aliases

188 Network OS NETCONF Operations Guide53-1003231-02Command access rules15<command><enumList>username</enumList></command><

Strany 137

Network OS NETCONF Operations Guide 18953-1003231-02Password policies15<role>FCoEAdmin</role><user-password>testpassword</user-pa

Strany 138

190 Network OS NETCONF Operations Guide53-1003231-02Password policies15NOTEPasswords can be a maximum of 40 characters in length. Password encryption

Strany 139

Network OS NETCONF Operations Guide 19153-1003231-02Password policies15</config></edit-config></rpc><rpc-reply message-id="8

Strany 140

192 Network OS NETCONF Operations Guide53-1003231-02Password policies15The output shows the password stored in encrypted form because the switch-level

Strany 141 - Deleting an alias

Network OS NETCONF Operations Guide 19353-1003231-02Password policies15Configuring the account lockout thresholdYou can configure the lockout threshol

Strany 142 - Zoning information

194 Network OS NETCONF Operations Guide53-1003231-02Password policies15Managing password policiesConfigure the <password-attributes> node in the

Strany 143

Network OS NETCONF Operations Guide 19553-1003231-02Password policies15<get-config><source><running/></source><filter type=

Strany 144

196 Network OS NETCONF Operations Guide53-1003231-02Security event logging15Security event loggingSecurity event logging utilizes the RASlog audit inf

Strany 145

Network OS NETCONF Operations Guide 19753-1003231-02Chapter16External Server AuthenticationIn this chapter•Remote server authentication with NETCONF o

Strany 146

Network OS NETCONF Operations Guide xxiii53-1003231-02FiguresFigure 1 Four layers of NETCONF . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 147 - Zone creation and management

198 Network OS NETCONF Operations Guide53-1003231-02Login authentication mode16Login authentication modeUsing the NETCONF interfaces, you can configur

Strany 148 - Adding a member to a zone

Network OS NETCONF Operations Guide 19953-1003231-02Login authentication mode16<?xml version="1.0" encoding="UTF-8"?><rpc

Strany 149 - Removing a member from a zone

200 Network OS NETCONF Operations Guide53-1003231-02Login authentication mode16</aaa></aaa-config></config></edit-config></

Strany 150 - Deleting a zone

Network OS NETCONF Operations Guide 20153-1003231-02Login authentication mode16<running/></target><config><aaa-config xmlns="

Strany 151 - Zone configuration management

202 Network OS NETCONF Operations Guide53-1003231-02RADIUS16</aaa></aaa-config></filter></get-config></rpc><rpc-reply

Strany 152

Network OS NETCONF Operations Guide 20353-1003231-02RADIUS16NOTEIf you do not configure the key attribute, the authentication session will not be encr

Strany 153

204 Network OS NETCONF Operations Guide53-1003231-02RADIUS16</rpc><rpc-reply message-id="907" xmlns="urn:ietf:params:xml:ns:ne

Strany 154 - Enabling a zone configuration

Network OS NETCONF Operations Guide 20553-1003231-02RADIUS16<radius-server xmlns="urn:brocade.com:mgmt:brocade-aaa"><host><ho

Strany 155 - Deleting a zone configuration

206 Network OS NETCONF Operations Guide53-1003231-02RADIUS16</radius-server></filter></get-config></rpc><rpc-reply message-

Strany 156

Network OS NETCONF Operations Guide 20753-1003231-02TACACS+16TACACS+TACACS+ is an AAA server protocol that uses a centralized authentication server an

Strany 157

xxiv Network OS NETCONF Operations Guide53-1003231-02

Strany 158

208 Network OS NETCONF Operations Guide53-1003231-02TACACS+161. Issue the <edit-config> RPC to configure the <tacacs-server> node in the u

Strany 159

Network OS NETCONF Operations Guide 20953-1003231-02TACACS+16<timeout>5</timeout></host></tacacs-server></rpc>Modifying

Strany 160 - Zone configuration scenario

210 Network OS NETCONF Operations Guide53-1003231-02TACACS+16<ok/></rpc-reply>3. Issue the <get-config> RPC with a subtree filter to

Strany 161 - • Cfg1 containing ZoneA only

Network OS NETCONF Operations Guide 21153-1003231-02TACACS+ accounting16</tacacs-server></config></edit-config></rpc><rpc-r

Strany 162

212 Network OS NETCONF Operations Guide53-1003231-02TACACS+ accounting16</edit-config></rpc><rpc-reply message-id="919" xmlns

Strany 163

Network OS NETCONF Operations Guide 21353-1003231-02TACACS+ accounting16<target><running/></target><config><aaa-config xmln

Strany 164

214 Network OS NETCONF Operations Guide53-1003231-02TACACS+ accounting16Disabling accountingYou must perform the disable operation separately for logi

Strany 165

Network OS NETCONF Operations Guide 21553-1003231-02LDAP16<config><aaa-config xmlns="urn:brocade.com:mgmt:brocade-aaa"><aaa&g

Strany 166 - Compression

216 Network OS NETCONF Operations Guide53-1003231-02LDAP16c. In the <password> element, enter the password.d. In the <host> element, enter

Strany 167

Network OS NETCONF Operations Guide 21753-1003231-02LDAP16FIPS complianceTo support FIPS compliance, the CA certificate of the AD server’s certificate

Strany 168 - Enabling a Fibre Channel port

Network OS NETCONF Operations Guide xxv53-1003231-02TablesTable 1 Trademark references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 169

218 Network OS NETCONF Operations Guide53-1003231-02LDAP16<rpc message-id="927" xmlns="urn:ietf:params:xml:ns:netconf:base:1.0"

Strany 170

Network OS NETCONF Operations Guide 21953-1003231-02LDAP16<running/></target><config><ldap-server xmlns="urn:brocade.com:mgm

Strany 171

220 Network OS NETCONF Operations Guide53-1003231-02LDAP16Mapping an Active Directory group to a switch roleA maximum of 16 AD groups can be mapped to

Strany 172

Network OS NETCONF Operations Guide 22153-1003231-02LDAP16The following example removes the mapping between the Brocade admin role and the Active Dire

Strany 173

222 Network OS NETCONF Operations Guide53-1003231-02LDAP16

Strany 174

Network OS NETCONF Operations Guide 22353-1003231-02Chapter17Fabric AuthenticationIn this chapter•Fabric authentication with NETCONF overview . . . .

Strany 175 - System Monitor Configuration

224 Network OS NETCONF Operations Guide53-1003231-02Device authentication configuration17FC AUTH and SCC policy parameters are defined in the brocade-

Strany 176 - FRU monitoring

Network OS NETCONF Operations Guide 22553-1003231-02Device authentication configuration17<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf:base

Strany 177

226 Network OS NETCONF Operations Guide53-1003231-02Device authentication configuration17<nca:action xmlns:nca="http://tail-f.com/ns/netconf/a

Strany 178

Network OS NETCONF Operations Guide 22753-1003231-02Device authentication configuration17<rpc message-id="1403" xmlns="urn:ietf:para

Strany 179

xxvi Network OS NETCONF Operations Guide53-1003231-02

Strany 180 - Alert notifications

228 Network OS NETCONF Operations Guide53-1003231-02Switch Connection Control policy configuration17<ok/></rpc-reply>5. Issue the <get-

Strany 181 - Configuring e-mail alerts

Network OS NETCONF Operations Guide 22953-1003231-02Switch Connection Control policy configuration17</secpolicy></config></edit-config&

Strany 182

230 Network OS NETCONF Operations Guide53-1003231-02Switch Connection Control policy configuration17<nca:action xmlns:nca="http://tail-f.com/n

Strany 183 - To change the domain name:

Network OS NETCONF Operations Guide 23153-1003231-02Switch Connection Control policy configuration17Removing the SCC policyTo remove the SCC policy, p

Strany 184 - Resource monitoring

232 Network OS NETCONF Operations Guide53-1003231-02Switch Connection Control policy configuration17

Strany 185 - Configuring CPU monitoring

Network OS NETCONF Operations Guide 23353-1003231-02SectionIIINetwork OS Layer 2 Switch FeaturesThis section describes the Layer 2 features of Network

Strany 186 - Security monitoring

234 Network OS NETCONF Operations Guide53-1003231-02

Strany 187

Network OS NETCONF Operations Guide 23553-1003231-02Chapter18Administering Edge-Loop DetectionIn this chapter•Edge-loop detection overview . . . . . .

Strany 188

236 Network OS NETCONF Operations Guide53-1003231-02Configuring edge-loop detection18For each interface on which ELD runs, enable the edge-loop detect

Strany 189 - Interface monitoring

Network OS NETCONF Operations Guide 23753-1003231-02Configuring edge-loop detection18</rpc-reply>Setting interface parameters on a portPerform t

Strany 190

Network OS NETCONF Operations Guide xxvii53-1003231-02About This DocumentIn this chapter•How this document is organized . . . . . . . . . . . . . . .

Strany 191

238 Network OS NETCONF Operations Guide53-1003231-02Edge-loop detection troubleshooting18<eldprio>7</eldprio><eldvlan>10</eldvlan

Strany 192 - Pausing interface monitoring

Network OS NETCONF Operations Guide 23953-1003231-02Edge-loop detection troubleshooting18<rpc-reply message-id="803" xmlns="urn:ietf

Strany 193

240 Network OS NETCONF Operations Guide53-1003231-02Edge-loop detection troubleshooting18

Strany 194

Network OS NETCONF Operations Guide 24153-1003231-02Chapter19Configuring AMPPIn this chapter•AMPP configuration with NETCONF overview . . . . . . . .

Strany 195 - VMware vCenter

242 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19Configuring a new port-profileTo support VM MAC address learning,

Strany 196 - Step 2: Enabling CDP/LLDP

Network OS NETCONF Operations Guide 24353-1003231-02Configuring AMPP port-profiles19<rpc-reply message-id="1701" xmlns="urn:ietf:par

Strany 197 - Activating the vCenter

244 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19<mac-address>0050.56bf:0004</mac-address></static&g

Strany 198

Network OS NETCONF Operations Guide 24553-1003231-02Configuring AMPP port-profiles19a. Under the <port-profile> node, specify the name of the po

Strany 199 - Configuring Remote Monitoring

246 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19</allowed><native-vlan>300</native-vlan></tru

Strany 200

Network OS NETCONF Operations Guide 24753-1003231-02Configuring AMPP port-profiles19<port-profile><name>vm1-port-profile</name><s

Strany 201

xxviii Network OS NETCONF Operations Guide53-1003231-02• Chapter 12, “System Monitor Configuration” provides procedures monitoring the health of each

Strany 202

248 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19<switchport><trunk><trunk-vlan-classification>&l

Strany 203

Network OS NETCONF Operations Guide 24953-1003231-02Configuring AMPP port-profiles19<native-vlan-id>5112</native-vlan-id><native-vlan-c

Strany 204

250 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles194. In the <port-profile> node in the urn:brocade.com:mgmt:br

Strany 205 - Managing User Accounts

Network OS NETCONF Operations Guide 25153-1003231-02Configuring AMPP port-profiles19<activate xmlns="urn:ietf:params:xml:ns:netconf:base:1.0&q

Strany 206 - Parameter Description

252 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19The following code snippet enables pause generation with PFC:<q

Strany 207 - Creating a user account

Network OS NETCONF Operations Guide 25353-1003231-02Configuring AMPP port-profiles193. Activate the profile. <?xml version="1.0" encoding

Strany 208

254 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19<static><mac-address>0050.56bf:0005</mac-address>

Strany 209 - Disabling a user account

Network OS NETCONF Operations Guide 25553-1003231-02Configuring AMPP port-profiles19<port-profile xmlns="urn:brocade.com:mgmt:brocade-port-pro

Strany 210 - Unlocking a user account

256 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19<static><mac-address>0050.56bf:0002</mac-address>

Strany 211 - Role-based access control

Network OS NETCONF Operations Guide 25753-1003231-02Configuring AMPP port-profiles19 xmlns="urn:brocade.com:mgmt:brocade-port-profile">&l

Strany 212 - User-defined roles

Network OS NETCONF Operations Guide xxix53-1003231-02• Chapter 33, “IP Route Management” provides procedures for configuring the route manager to opti

Strany 213

258 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19<?xml version="1.0" encoding="UTF-8"?>&l

Strany 214 - Command access rules

Network OS NETCONF Operations Guide 25953-1003231-02Configuring AMPP port-profiles19Deleting a subprofileTo delete a subprofile, perform the following

Strany 215 - Rule processing

260 Network OS NETCONF Operations Guide53-1003231-02Configuring AMPP port-profiles19</port-profile></config></edit-config></rpc&g

Strany 216 - Adding a rule

Network OS NETCONF Operations Guide 26153-1003231-02Obtaining the AMPP operational data19<name>default</name><fcoe-profile xmlns="

Strany 217 - Deleting a rule

262 Network OS NETCONF Operations Guide53-1003231-02Obtaining the AMPP operational data19With no input parameters, the <get-port-profile-status>

Strany 218 - Verifying a rule

Network OS NETCONF Operations Guide 26353-1003231-02Obtaining the AMPP operational data19<last-received-port-profile-info><profile-name>au

Strany 219 - Configuration examples

264 Network OS NETCONF Operations Guide53-1003231-02Configuring a port-profile-port19</last-recevied-interface-info></get-port-profile-for-in

Strany 220

Network OS NETCONF Operations Guide 26553-1003231-02Configuring a port-profile-port19<ok/></rpc-reply>Association of multiple port-profile

Strany 221 - Password policies

266 Network OS NETCONF Operations Guide53-1003231-02Configuring port-profile-domains19<running/></target><config><interface xmlns

Strany 222 - Password encryption policy

Network OS NETCONF Operations Guide 26753-1003231-02Configuring port-profile-domains191. Activate the port-profile-domain—Issue an <edit-config>

Strany 223

Network OS NETCONF Operations Guide iii53-1003231-02Contents (High Level)Section I Network OS AdministrationChapter 1 NETCONF Overview. . . . . . . .

Strany 224 - Account lockout policy

xxx Network OS NETCONF Operations Guide53-1003231-02bold text Identifies command namesIdentifies the names of user-manipulated GUI elementsIdentifies

Strany 225

268 Network OS NETCONF Operations Guide53-1003231-02Configuring port-profile-domains19</port-profile-domain></config></edit-config>&

Strany 226 - Managing password policies

Network OS NETCONF Operations Guide 26953-1003231-02Configuring port-profile-domains19</filter></get-config></rpc></rpc><rp

Strany 227

270 Network OS NETCONF Operations Guide53-1003231-02Configuring port-profile-domains19

Strany 228 - Security event logging

Network OS NETCONF Operations Guide 27153-1003231-02Chapter20Configuring FCoE InterfacesIn this chapter•FCoE configuration with NETCONF overview . . .

Strany 229

272 Network OS NETCONF Operations Guide53-1003231-02Configuring FCoE interfaces20Configuring FCoE interfacesFCoE maps are used to configure FCoE prope

Strany 230 - Login authentication mode

Network OS NETCONF Operations Guide 27353-1003231-02Configuring FCoE interfaces20<fcoeport-map>default</fcoeport-map></fcoeport><

Strany 231

274 Network OS NETCONF Operations Guide53-1003231-02Configuring FCoE interfaces20To assign an FCoE map to a LAG, perform the following steps.1. Issue

Strany 232

Network OS NETCONF Operations Guide 27553-1003231-02Obtaining FCoE status20<interface xmlns="urn:brocade.com:mgmt:brocade-interface">&

Strany 233

276 Network OS NETCONF Operations Guide53-1003231-02Obtaining FCoE status20The following example returns information for all FCoE devices logged into

Strany 234

Network OS NETCONF Operations Guide 27753-1003231-02Chapter21Configuring VLANs In this chapter•VLAN configuration with NETCONF overview . . . . . . .

Strany 235

Network OS NETCONF Operations Guide xxxi53-1003231-02Notice to the readerThis document may contain references to the trademarks of the following corpo

Strany 236

278 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21Enabling and disabling an interface portNOTEDCB interfaces are

Strany 237

Network OS NETCONF Operations Guide 27953-1003231-02VLAN configuration and management21<name>22/0/1</name><shutdown/></tengigabit

Strany 238

280 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21Creating a VLAN interface On Brocade VDX hardware, VLANs are tr

Strany 239

Network OS NETCONF Operations Guide 28153-1003231-02VLAN configuration and management211. To select the type of STP, issue an <edit-config> RPC

Strany 240

282 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21Disabling STP on a VLANOnce all of the interface ports have bee

Strany 241 - TACACS+ servers

Network OS NETCONF Operations Guide 28353-1003231-02VLAN configuration and management21a. In the <name> element, specify the interface port in [

Strany 242

284 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21<ifindex xmlns="urn:brocade.com:mgmt:brocade-interface&

Strany 243 - TACACS+ accounting

Network OS NETCONF Operations Guide 28553-1003231-02VLAN configuration and management216. Under the <gigabitethernet>, <tengigabitethernet>

Strany 244 - Enabling command accounting

286 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21a. In the <name> element, specify the port name in [rbrid

Strany 245

Network OS NETCONF Operations Guide 28753-1003231-02VLAN configuration and management21<trunk><allowed><vlan><all/></vlan&g

Strany 246 - Disabling accounting

xxxii Network OS NETCONF Operations Guide53-1003231-02Getting technical helpContact your switch support supplier for hardware, firmware, and software

Strany 247 - Server authentication

288 Network OS NETCONF Operations Guide53-1003231-02VLAN configuration and management21</rpc-reply>Disabling a VLAN on a trunk interfaceTo disab

Strany 248 - Deleting CA certificates

Network OS NETCONF Operations Guide 28953-1003231-02Configuring protocol-based VLAN classifier rules21<config><interface xmlns="urn:broc

Strany 249 - FIPS compliance

290 Network OS NETCONF Operations Guide53-1003231-02Configuring protocol-based VLAN classifier rules21NOTEFor complete information on all available VL

Strany 250

Network OS NETCONF Operations Guide 29153-1003231-02Configuring protocol-based VLAN classifier rules211. Issue an <edit-config> RPC to configure

Strany 251 - Active Directory groups

292 Network OS NETCONF Operations Guide53-1003231-02Configuring protocol-based VLAN classifier rules21<target><running/></target><

Strany 252

Network OS NETCONF Operations Guide 29353-1003231-02Configuring protocol-based VLAN classifier rules21</classifier></vlan></config>&

Strany 253

294 Network OS NETCONF Operations Guide53-1003231-02Configuring protocol-based VLAN classifier rules21<classifier><activate><group>&

Strany 254

Network OS NETCONF Operations Guide 29553-1003231-02Configuring protocol-based VLAN classifier rules21<if-state xmlns="urn:brocade.com:mgmt:br

Strany 255 - Fabric Authentication

296 Network OS NETCONF Operations Guide53-1003231-02Configuring protocol-based VLAN classifier rules21Obtaining VLAN information for one VLANTo return

Strany 256

Network OS NETCONF Operations Guide 29753-1003231-02Configuring the MAC address table21<vlan-state>active</vlan-state><interface><

Strany 257 - Removing shared secrets

Network OS NETCONF Operations Guide 153-1003231-02SectionINetwork OS AdministrationThis section describes basic Network OS administration features, an

Strany 258

298 Network OS NETCONF Operations Guide53-1003231-02Private VLANs21Adding static addresses to the MAC address tableTo add a static address to the MAC

Strany 259

Network OS NETCONF Operations Guide 29953-1003231-02Private VLANs21An isolated VLAN is a secondary VLAN whose distinctive characteristic is that all h

Strany 260 - Creating a defined SCC policy

300 Network OS NETCONF Operations Guide53-1003231-02Private VLANs21 <target> <running/> </target> <config> &l

Strany 261 - Activating the SCC policy

Network OS NETCONF Operations Guide 30153-1003231-02Private VLANs21Displaying PVLAN informationUse the <get-config> RPC to retrieve the current

Strany 262

302 Network OS NETCONF Operations Guide53-1003231-02Private VLANs21

Strany 263 - Removing the SCC policy

Network OS NETCONF Operations Guide 30353-1003231-02Chapter22Configuring VXLANs In this chapter•VXLAN configuration with NETCONF overview . . . . . .

Strany 264

304 Network OS NETCONF Operations Guide53-1003231-02VXLAN configuration and management22High-level communication in a VXLAN environmentFigure 4 provid

Strany 265

Network OS NETCONF Operations Guide 30553-1003231-02VXLAN configuration and management22<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0&qu

Strany 266

306 Network OS NETCONF Operations Guide53-1003231-02VXLAN configuration and management22 </vlan> </attach> </overl

Strany 267 - Edge-loop detection overview

Network OS NETCONF Operations Guide 30753-1003231-02VXLAN configuration and management22 <vlan-action>add</vlan-action>

Strany 268

2 Network OS NETCONF Operations Guide53-1003231-02

Strany 269

308 Network OS NETCONF Operations Guide53-1003231-02VXLAN configuration and management22</rpc><rpc-reply message-id="8" xmlns="

Strany 270

Network OS NETCONF Operations Guide 30953-1003231-02VXLAN configuration and management22 </edit-config></rpc><rpc-reply message-id=&qu

Strany 271

310 Network OS NETCONF Operations Guide53-1003231-02VXLAN configuration and management22

Strany 272

Network OS NETCONF Operations Guide 31153-1003231-02Chapter23Configuring Virtual FabricsIn this chapter•Virtual Fabric configuration with NETCONF over

Strany 273 - Configuring AMPP

312 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23<rpc message-id="1101" xmlns=&quo

Strany 274

Network OS NETCONF Operations Guide 31353-1003231-02Virtual Fabric configuration with NETCONF overview23• Community VLANAt least two of these three ty

Strany 275 - 7. Activate the profile

314 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23<config><interface-vlan xmlns="u

Strany 276 - Configuring VLAN profiles

Network OS NETCONF Operations Guide 31553-1003231-02Virtual Fabric configuration with NETCONF overview23</private-vlan> </vlan>

Strany 277

316 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23</interface-vlan></config></edi

Strany 278 - 3. Activate the profile

Network OS NETCONF Operations Guide 31753-1003231-02Virtual Fabric configuration with NETCONF overview231. Create classification rules for the primary

Strany 279

Network OS NETCONF Operations Guide 353-1003231-02Chapter1NETCONF OverviewIn this chapter•NETCONF and YANG . . . . . . . . . . . . . . . . . . . . .

Strany 280

318 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23 <private-vlan-trunk> <trunk-host

Strany 281 - Configuring FCoE profiles

Network OS NETCONF Operations Guide 31953-1003231-02Virtual Fabric configuration with NETCONF overview23<?xml version="1.0" encoding=&quo

Strany 282 - Configuring QoS profiles

320 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23a. In the <name> element, specify the po

Strany 283

Network OS NETCONF Operations Guide 32153-1003231-02Virtual Fabric configuration with NETCONF overview231. Issue an <edit-config> RPC to configu

Strany 284

322 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23Configuring native Virtual Fabric on interface

Strany 285

Network OS NETCONF Operations Guide 32353-1003231-02Virtual Fabric configuration with NETCONF overview23<running/></target><config>&

Strany 286 - Configuring security profiles

324 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23Configuring access Virtual Fabric on interface

Strany 287

Network OS NETCONF Operations Guide 32553-1003231-02Virtual Fabric configuration with NETCONF overview23</rpc-reply>Configuring an access Virtua

Strany 288

326 Network OS NETCONF Operations Guide53-1003231-02Virtual Fabric configuration with NETCONF overview23<rpc-reply xmlns="urn:ietf:params:xml:

Strany 289 - Deleting a port-profile

Network OS NETCONF Operations Guide 32753-1003231-02Transport service23<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id=&q

Strany 290

4 Network OS NETCONF Operations Guide53-1003231-02NETCONF in client/server architecture1NETCONF is partitioned conceptually into four layers, as shown

Strany 291 - Deleting a subprofile

328 Network OS NETCONF Operations Guide53-1003231-02Transport service23 <running/> </target> <config> <interface-

Strany 292

Network OS NETCONF Operations Guide 32953-1003231-02Chapter24Configuring Spanning Tree ProtocolsIn this chapter•Spanning tree configuration with NETCO

Strany 293

330 Network OS NETCONF Operations Guide53-1003231-02Configuring STP24Configuring STP To configure STP, perform the following steps.1. Issue the <ed

Strany 294

Network OS NETCONF Operations Guide 33153-1003231-02Configuring STP24<interface xmlns="urn:brocade.com:mgmt:brocade-interface"><ten

Strany 295

332 Network OS NETCONF Operations Guide53-1003231-02Configuring RSTP24<portfastbasic/></portfast></spanning-tree></tengigabitethe

Strany 296

Network OS NETCONF Operations Guide 33353-1003231-02Configuring RSTP24For details, refer to “Specifying the bridge priority for all xSTP” on page 340.

Strany 297 - Deleting a port-profile-port

334 Network OS NETCONF Operations Guide53-1003231-02Configuring RSTP24The port priority range is 0 through 240 in increments of 16. The default is 128

Strany 298

Network OS NETCONF Operations Guide 33553-1003231-02Configuring MSTP24<path-cost>custom</path-cost></port-channel><hello-time>

Strany 299

336 Network OS NETCONF Operations Guide53-1003231-02Configuring MSTP244. Under the <mstp> node, include the <region> node element and spec

Strany 300

Network OS NETCONF Operations Guide 33753-1003231-02Configuring PVST and Rapid PVST24Configuring PVST and Rapid PVST The basic process for configuring

Strany 301

Network OS NETCONF Operations Guide 553-1003231-02NETCONF in client/server architecture1FIGURE 2 NETCONF communicationThe communication between the cl

Strany 302

338 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24</rpc><rpc-reply message-id="2003"

Strany 303 - Configuring FCoE Interfaces

Network OS NETCONF Operations Guide 33953-1003231-02Spanning tree configuration and management24Disabling STP, RSTP, MSTP, PVST, or Rapid PVSTNOTEThis

Strany 304 - Configuring FCoE interfaces

340 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24<config><protocol xmlns="urn:brocade.com

Strany 305

Network OS NETCONF Operations Guide 34153-1003231-02Spanning tree configuration and management24<config><protocol xmlns="urn:brocade.com

Strany 306

342 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24</edit-config></rpc><rpc-reply message-

Strany 307 - Obtaining FCoE status

Network OS NETCONF Operations Guide 34353-1003231-02Spanning tree configuration and management24Specifying bridge forward delay on a per-VLAN basis Us

Strany 308

344 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24Specifying the bridge maximum aging time for all xSTPF

Strany 309 - Configuring VLANs

Network OS NETCONF Operations Guide 34553-1003231-02Spanning tree configuration and management242*(forward_delay - 1)>=max_age>=2*(hello_time +

Strany 310

346 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management241. Issue the <edit-config> RPC to configure the

Strany 311

Network OS NETCONF Operations Guide 34753-1003231-02Spanning tree configuration and management245. Under the <error-disable-timeout> node, inclu

Strany 312 - Enabling STP on a VLAN

6 Network OS NETCONF Operations Guide53-1003231-02NETCONF in client/server architecture1RPC and error handlingIf the RPC request fails, an <rpc-err

Strany 313

348 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24<protocol xmlns="urn:brocade.com:mgmt:brocade-

Strany 314 - Disabling STP on a VLAN

Network OS NETCONF Operations Guide 34953-1003231-02Spanning tree configuration and management24<ok/></rpc-reply>Specifying the bridge hel

Strany 315

350 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24Specifying the transmit hold count Use this procedure

Strany 316

Network OS NETCONF Operations Guide 35153-1003231-02Spanning tree configuration and management24To enable interoperability with certain legacy Cisco s

Strany 317 - • Specifies trunk mode

352 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management24<cisco-interoperability>disable</cisco-intero

Strany 318

Network OS NETCONF Operations Guide 35353-1003231-02Spanning tree configuration and management24</rpc-reply>Specifying the maximum number of hop

Strany 319

354 Network OS NETCONF Operations Guide53-1003231-02Spanning tree configuration and management244. Under the <mstp> node, include the <region

Strany 320

Network OS NETCONF Operations Guide 35553-1003231-02Retrieving spanning tree-related information24<rpc-reply message-id="2024" xmlns=&quo

Strany 321

356 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24Reissue the RPC, using the value returned in the <

Strany 322

Network OS NETCONF Operations Guide 35753-1003231-02Configuring all xSTP on DCB interface ports24a. In the <name> element, specify the interface

Strany 323

Network OS NETCONF Operations Guide 753-1003231-02NETCONF support in Network OS1• RFC 6020, “YANG - A Data Modeling Language for the Network Configura

Strany 324

358 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24c. Include the <spanning-tree> node element, wh

Strany 325

Network OS NETCONF Operations Guide 35953-1003231-02Configuring all xSTP on DCB interface ports24c. Include the <spanning-tree> node element, wh

Strany 326 - Obtaining VLAN information

360 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports241. Issue the <edit-config> RPC to configure the

Strany 327

Network OS NETCONF Operations Guide 36153-1003231-02Configuring all xSTP on DCB interface ports24Guard root protects the root bridge from malicious at

Strany 328

362 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24Enabling the guard root per LAN (PVST and Rapid PVST)

Strany 329

Network OS NETCONF Operations Guide 36353-1003231-02Configuring all xSTP on DCB interface ports24<spanning-tree xmlns="urn:brocade.com:mgmt:br

Strany 330 - Private VLANs

364 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24<shutdown xmlns="urn:ietf:params:xml:ns:netco

Strany 331 - Configuring a private VLAN

Network OS NETCONF Operations Guide 36553-1003231-02Configuring all xSTP on DCB interface ports24<instance><id>5</id><retricted-t

Strany 332

366 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24</interface></config></edit-config>

Strany 333 - Displaying PVLAN information

Network OS NETCONF Operations Guide 36753-1003231-02Configuring all xSTP on DCB interface ports24<running/></target><config><inte

Strany 334

iv Network OS NETCONF Operations Guide53-1003231-02Chapter 23 Configuring Virtual Fabrics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 335 - Configuring VXLANs

8 Network OS NETCONF Operations Guide53-1003231-02NETCONF support in Network OS1

Strany 336

368 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24<name>22/0/1</name><shutdown xmlns=&qu

Strany 337

Network OS NETCONF Operations Guide 36953-1003231-02Configuring all xSTP on DCB interface ports24<config><interface xmlns="urn:brocade.c

Strany 338

370 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24 operation="delete"/><spanning-tree x

Strany 339

Network OS NETCONF Operations Guide 37153-1003231-02Configuring all xSTP on DCB interface ports24</edit-config></rpc><rpc-reply message

Strany 340

372 Network OS NETCONF Operations Guide53-1003231-02Configuring all xSTP on DCB interface ports24Disabling spanning treeBy default, spanning tree is d

Strany 341 - Displaying VXLAN information

Network OS NETCONF Operations Guide 37353-1003231-02Chapter25Configuring UDLDIn this chapter•Overview of UDLD and NETCONF . . . . . . . . . . . . . .

Strany 342

374 Network OS NETCONF Operations Guide53-1003231-02Configuring UDLD25<?xml version="1.0" encoding="UTF-8"?><rpc message-

Strany 343 - Configuring Virtual Fabrics

Network OS NETCONF Operations Guide 37553-1003231-02Configuring UDLD25Disabling UDLDTo disable UDLD, perform the following steps.1. 1. Issue the <e

Strany 344 - • Isolated VLAN

376 Network OS NETCONF Operations Guide53-1003231-02Configuring UDLD25

Strany 345 - • Community VLAN

Network OS NETCONF Operations Guide 37753-1003231-02Chapter26Configuring Link Aggregation In this chapter•Link aggregation with NETCONF overview . . .

Strany 346

Network OS NETCONF Operations Guide 953-1003231-02Chapter2Basic NETCONF OperationsIn this chapter•Establishing a NETCONF session . . . . . . . . . . .

Strany 347

378 Network OS NETCONF Operations Guide53-1003231-02Configuring a vLAG26The default configuration is to treat FCoE traffic as non-vLAG traffic. This o

Strany 348

Network OS NETCONF Operations Guide 37953-1003231-02Configuring a vLAG26<rbridge-id>231</rbridge-id><interface-type>tengigabitethern

Strany 349

380 Network OS NETCONF Operations Guide53-1003231-02Configuring the vLAG ignore split option26<rpc-reply xmlns="urn:ietf:params:xml:ns:netconf

Strany 350

Network OS NETCONF Operations Guide 38153-1003231-02Configuring the vLAG ignore split option26NOTEWith ignore-split active, a vLAG node reboot can res

Strany 351

382 Network OS NETCONF Operations Guide53-1003231-02Configuring the vLAG ignore split option26<rpc-reply message-id="1005" xmlns="ur

Strany 352

Network OS NETCONF Operations Guide 38353-1003231-02Configuring the vLAG ignore split option26<rpc-reply message-id="1007" xmlns="ur

Strany 353

384 Network OS NETCONF Operations Guide53-1003231-02LACP configuration and management26<?xml version="1.0" encoding="UTF-8"?>

Strany 354

Network OS NETCONF Operations Guide 38553-1003231-02LACP configuration and management263. Under the <gigabitethernet>, <tengigabitethernet>

Strany 355

386 Network OS NETCONF Operations Guide53-1003231-02LACP configuration and management26<?xml version="1.0" encoding="UTF-8"?>

Strany 356

Network OS NETCONF Operations Guide 38753-1003231-02LACP configuration and management26</config></edit-config></rpc><rpc-reply me

Strany 357

10 Network OS NETCONF Operations Guide53-1003231-02Establishing a NETCONF session2The following example shows a <hello> element from the NETCONF

Strany 358 - Configuring MAC groups

388 Network OS NETCONF Operations Guide53-1003231-02LACP configuration and management26

Strany 359 - Transport service

Network OS NETCONF Operations Guide 38953-1003231-02Chapter27Configuring LLDP In this chapter•LLDP configuration with NETCONF overview . . . . . . . .

Strany 360

390 Network OS NETCONF Operations Guide53-1003231-02Enabling and disabling LLDP27To enable LLDP globally, perform the following steps.1. Issue the <

Strany 361

Network OS NETCONF Operations Guide 39153-1003231-02Configuring LLDP global options27operation="delete"/></protocol></config>

Strany 362 - Configuring STP

392 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27NOTEBrocade recommends you use the operating system version for t

Strany 363

Network OS NETCONF Operations Guide 39353-1003231-02Configuring LLDP global options27<?xml version="1.0" encoding="UTF-8"?>&

Strany 364 - Configuring RSTP

394 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27<rpc message-id="1107" xmlns="urn:ietf:params:x

Strany 365

Network OS NETCONF Operations Guide 39553-1003231-02Configuring LLDP global options27<?xml version="1.0" encoding="UTF-8"?>&

Strany 366

396 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27</rpc-reply>Advertising the optional LLDP TLVsTo configure

Strany 367 - Configuring MSTP

Network OS NETCONF Operations Guide 39753-1003231-02Configuring LLDP global options27Configuring the advertisement of LLDP DCBX-related TLVsFor a swit

Strany 368

Network OS NETCONF Operations Guide 1153-1003231-02Retrieving configuration data2• Actions capability—Allows operations to be performed on the datasto

Strany 369

398 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27Configuring iSCSI priority The iSCSI priority setting is used to

Strany 370

Network OS NETCONF Operations Guide 39953-1003231-02Configuring LLDP global options271. Issue the <edit-config> RPC to configure the <protoco

Strany 371

400 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27</target><config><protocol xmlns="urn:brocade

Strany 372

Network OS NETCONF Operations Guide 40153-1003231-02Configuring LLDP global options27a. In the <PGID> element, specify the priority group ID.b.

Strany 373

402 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP global options27</target><config><cee-map xmlns="urn:brocade.

Strany 374

Network OS NETCONF Operations Guide 40353-1003231-02Configuring LLDP interface-level options27<rpc-reply message-id="1115" xmlns="ur

Strany 375

404 Network OS NETCONF Operations Guide53-1003231-02Configuring LLDP interface-level options271. Issue the <edit-config> RPC to configure the &l

Strany 376

Network OS NETCONF Operations Guide 40553-1003231-02Chapter28Configuring ACLs In this chapter•ACL configuration with NETCONF overview . . . . . . . .

Strany 377

406 Network OS NETCONF Operations Guide53-1003231-02ACL configuration and management28• seq 6 permit tcp any any eq 443• seq 7 permit udp any any eq 1

Strany 378

Network OS NETCONF Operations Guide 40753-1003231-02ACL configuration and management286. Issue the <bna-config-cmd> RPC to save the running-conf

Strany 379

12 Network OS NETCONF Operations Guide53-1003231-02Retrieving configuration data2The following example shows a client message that issues the <get-

Strany 380

408 Network OS NETCONF Operations Guide53-1003231-02ACL configuration and management283. Under the <extended> node, include the <name> lea

Strany 381

Network OS NETCONF Operations Guide 40953-1003231-02ACL configuration and management28</edit-config></rpc><rpc-reply message-id="2

Strany 382

410 Network OS NETCONF Operations Guide53-1003231-02ACL configuration and management28<switchport><basic/></switchport><mac xmlns

Strany 383

Network OS NETCONF Operations Guide 41153-1003231-02ACL configuration and management28<mac-access-list>test_02</mac-access-list><mac-di

Strany 384

412 Network OS NETCONF Operations Guide53-1003231-02ACL configuration and management28</seq></extended></access-list></mac><

Strany 385

Network OS NETCONF Operations Guide 41353-1003231-02ACL configuration and management283. Under the <extended> node, include the <name> ele

Strany 386

414 Network OS NETCONF Operations Guide53-1003231-02IP ACL28IP ACLThe IP ACLs control access to the switch. The policies do not control the egress and

Strany 387

Network OS NETCONF Operations Guide 41553-1003231-02IP ACL28a. In the <seq-id> element, set a sequence number for the rule to identify the rule

Strany 388

416 Network OS NETCONF Operations Guide53-1003231-02IP ACL28Creating an extended IP or IPv6 ACLTo create an extended IP ACL, perform the following ste

Strany 389

Network OS NETCONF Operations Guide 41753-1003231-02IP ACL28<dport>eq</dport><dport-number-eq-neq-tcp>23 </dport-number-eq-neq-tc

Strany 390

Network OS NETCONF Operations Guide 1353-1003231-02Retrieving configuration data2<source><running/></source><filter type="su

Strany 391

418 Network OS NETCONF Operations Guide53-1003231-02IP ACL285. Under the <ip> or <ipv6> node, include the <access-group> node elemen

Strany 392

Network OS NETCONF Operations Guide 41953-1003231-02IP ACL286. Under the <access-group> node, include the <ip-access-list> or <ipv6-acc

Strany 393

420 Network OS NETCONF Operations Guide53-1003231-02IP ACL28<get-config><source><running/></source><filter type="subtr

Strany 394

Network OS NETCONF Operations Guide 42153-1003231-02Chapter29Configuring QoS In this chapter•QoS configuration under NETCONF overview . . . . . . . .

Strany 395

422 Network OS NETCONF Operations Guide53-1003231-02Rewriting29RewritingRewriting a frame header field is typically performed by an edge device. Rewri

Strany 396

Network OS NETCONF Operations Guide 42353-1003231-02Queueing29<?xml version="1.0" encoding="UTF-8"?><rpc message-id="

Strany 397 - Specifying a link type

424 Network OS NETCONF Operations Guide53-1003231-02Queueing29</interface></rpc> Configuring user-priority mappings To configure user-prio

Strany 398

Network OS NETCONF Operations Guide 42553-1003231-02Queueing294. Under the <cos-mutation> node, include the following elements.a. In the <nam

Strany 399 - Specifying the port priority

426 Network OS NETCONF Operations Guide53-1003231-02Queueing295. Under the <qos> node, include the <cos-mutation> leaf element and specify

Strany 400

Network OS NETCONF Operations Guide 42753-1003231-02Queueing29</source><filter type="subtree"><qos xmlns="urn:brocade.co

Strany 401

14 Network OS NETCONF Operations Guide53-1003231-02Retrieving configuration data2<trunk-enable></trunk-enable></fc-port></interfa

Strany 402

428 Network OS NETCONF Operations Guide53-1003231-02Queueing29 <qos xmlns="urn:brocade.com:mgmt:brocade-qos">

Strany 403 - Enabling spanning tree

Network OS NETCONF Operations Guide 42953-1003231-02Queueing296. Issue the <bna-config-cmd> RPC to save the running-config file to the startup-c

Strany 404 - Disabling spanning tree

430 Network OS NETCONF Operations Guide53-1003231-02Queueing29</trust></qos></tengigabitethernet></interface></rpc>Creat

Strany 405 - Configuring UDLD

Network OS NETCONF Operations Guide 43153-1003231-02Queueing29<to>19</to></mark><mark><dscp-in-values>12,14,16,18</ds

Strany 406

432 Network OS NETCONF Operations Guide53-1003231-02Queueing29<qos xmlns="urn:brocade.com:mgmt:brocade-qos"><dscp-mutation>test&

Strany 407 - Retrieving UDLD statistics

Network OS NETCONF Operations Guide 43353-1003231-02Queueing29<dscp-in-values>12,14,16,18</dscp-in-values><to>20</to></mark

Strany 408

434 Network OS NETCONF Operations Guide53-1003231-02Queueing29Creating a DSCP-to-CoS mutation mapYou can use the incoming DSCP value of ingress packet

Strany 409 - Configuring Link Aggregation

Network OS NETCONF Operations Guide 43553-1003231-02Queueing29</dscp-cos></map></qos></config></edit-config></rpc>

Strany 410

436 Network OS NETCONF Operations Guide53-1003231-02Queueing29</rpc><rpc-reply message-id="2315" xmlns="urn:ietf:params:xml:ns

Strany 411

Network OS NETCONF Operations Guide 43753-1003231-02Queueing292. Return a list of interfaces that are bound to a DSCP-to-CoS map using an xpath filter

Strany 412

Network OS NETCONF Operations Guide 1553-1003231-02Retrieving operational data2<default-cos>0</default-cos><cos-mutation>test</co

Strany 413

438 Network OS NETCONF Operations Guide53-1003231-02Queueing29To map a CoS to a Traffic-Class, perform the following steps.1. Issue the <edit-confi

Strany 414

Network OS NETCONF Operations Guide 43953-1003231-02Queueing293. Under the <gigabitethernet>, <tengigabitethernet>, <fortygigabitethern

Strany 415 - TABLE 12 Load balance flavor

440 Network OS NETCONF Operations Guide53-1003231-02Queueing29<source><running/></source><filter type="subtree"><

Strany 416

Network OS NETCONF Operations Guide 44153-1003231-02Queueing29 <tengigabitethernet> <name>0/51</name>

Strany 417

442 Network OS NETCONF Operations Guide53-1003231-02Queueing29<map><dscp-traffic-class><dscp-traffic-class-map-name>test </dscp-t

Strany 418

Network OS NETCONF Operations Guide 44353-1003231-02Queueing29<target><running/></target><config><interface xmlns="urn

Strany 419

444 Network OS NETCONF Operations Guide53-1003231-02Queueing29<dscp-in-values>11,13,15,17</dscp-in-values><to>5</to></mark&

Strany 420

Network OS NETCONF Operations Guide 44553-1003231-02Congestion control29Congestion controlFor conceptual information about the various congestion cont

Strany 421 - Configuring LLDP

446 Network OS NETCONF Operations Guide53-1003231-02Congestion control29Configuring CoS thresholdsTo configure CoS thresholds, perform the following s

Strany 422

Network OS NETCONF Operations Guide 44753-1003231-02Congestion control29Random Early DetectionProcedures for configuring and applying Random Early Det

Strany 423

16 Network OS NETCONF Operations Guide53-1003231-02Retrieving operational data2<interface-type>tengigabitethernet</interface-type><inte

Strany 424

448 Network OS NETCONF Operations Guide53-1003231-02Congestion control29Enabling a RED profile to use CoS priorityTo map a CoS priority value on a per

Strany 425

Network OS NETCONF Operations Guide 44953-1003231-02Congestion control29Enabling Ethernet PauseTo enable Ethernet Pause, perform the following steps.1

Strany 426

450 Network OS NETCONF Operations Guide53-1003231-02Congestion control29Ethernet Priority Flow ControlThis section provides procedures for configuring

Strany 427

Network OS NETCONF Operations Guide 45153-1003231-02Multicast rate limiting29</config></edit-config></rpc><rpc-reply message-id=&

Strany 428 - • <adv-tlv-system-name>

452 Network OS NETCONF Operations Guide53-1003231-02Broadcast, unknown unicast, and multicast storm control29</rpc-reply>Broadcast, unknown unic

Strany 429

Network OS NETCONF Operations Guide 45353-1003231-02Scheduling29<?xml version="1.0" encoding="UTF-8"?><rpc message-id=&qu

Strany 430 - Configuring LLDP profiles

454 Network OS NETCONF Operations Guide53-1003231-02Scheduling29c. In the <dwrr-traffic-classn> element, set the percentage of bandwidth to be a

Strany 431 - <running/>

Network OS NETCONF Operations Guide 45553-1003231-02Data Center Bridging map configuration294. Under the <dwrr> node, include a <dwrr-traffic

Strany 432

456 Network OS NETCONF Operations Guide53-1003231-02Data Center Bridging map configuration29The following example creates a CEE map named “default.”&l

Strany 433

Network OS NETCONF Operations Guide 45753-1003231-02Data Center Bridging map configuration29</priority-group-table></cee-map></config&g

Strany 434 - (more interfaces go here)

Network OS NETCONF Operations Guide 1753-1003231-02Retrieving operational data2<vlan-name>vlan-20</vlan-name><vlan-state>active</

Strany 435 - Deleting an LLDP profile

458 Network OS NETCONF Operations Guide53-1003231-02Data Center Bridging map configuration29Applying a CEE provisioning map to an interfaceTo apply a

Strany 436

Network OS NETCONF Operations Guide 45953-1003231-02Brocade VCS Fabric QoS29<rpc-reply message-id="2341" xmlns="urn:ietf:params:xml:

Strany 437 - Configuring ACLs

460 Network OS NETCONF Operations Guide53-1003231-02Brocade VCS Fabric QoS29Configuring Brocade VCS Fabric QoSTo configure the remapping priorities fo

Strany 438

Network OS NETCONF Operations Guide 46153-1003231-02Restrictions for Layer 3 features in VCS mode29<name>22/0/1</name><cee>default&l

Strany 439

462 Network OS NETCONF Operations Guide53-1003231-02Port-based Policier291. Issue the <edit-config> RPC to configure the <class-map> node

Strany 440

Network OS NETCONF Operations Guide 46353-1003231-02Port-based Policier29To configure a priority map, perform the following steps. For a complete desc

Strany 441

464 Network OS NETCONF Operations Guide53-1003231-02Port-based Policier29</rpc-reply>Configuring the policy mapA policy map can contain multiple

Strany 442

Network OS NETCONF Operations Guide 46553-1003231-02Port-based Policier29</target><config><policy-map xmlns="urn:brocade.com:mgmt:

Strany 443 - Modifying MAC ACL rules

466 Network OS NETCONF Operations Guide53-1003231-02Port-based Policier29<edit-config><target><running/></target><config>

Strany 444 - Removing a MAC ACL

Network OS NETCONF Operations Guide 46753-1003231-02Port-based Policier29<running/></target><config><interface xmlns="urn:br

Strany 445

Network OS NETCONF Operations Guide v53-1003231-02Contents (Detailed)About This DocumentIn this chapter . . . . . . . . . . . . . . . . . . . . . . .

Strany 446

18 Network OS NETCONF Operations Guide53-1003231-02Editing the configuration2<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message

Strany 447

468 Network OS NETCONF Operations Guide53-1003231-02Port-based Policier29</service-policy></tengigabitethernet></interface></rpc-

Strany 448

Network OS NETCONF Operations Guide 46953-1003231-02Port-based Policier29<class-map xmlns="urn:brocade.com:mgmt:brocade-policer"><n

Strany 449

470 Network OS NETCONF Operations Guide53-1003231-02Configuring Auto-QOS29Configuring Auto-QOSAuto QoS (Quality of Service) for NAS creates a minimum

Strany 450

Network OS NETCONF Operations Guide 47153-1003231-02Configuring Auto-QOS29</rpc><rpc-reply message-id="2351" xmlns="urn:ietf:p

Strany 451

472 Network OS NETCONF Operations Guide53-1003231-02Configuring Auto-QOS29

Strany 452

Network OS NETCONF Operations Guide 47353-1003231-02Chapter30Configuring 802.1x Port Authentication In this chapter•802.1x port authentication with NE

Strany 453 - Configuring QoS

474 Network OS NETCONF Operations Guide53-1003231-02802.1x authentication configuration tasks30To add a RADIUS server and enable 802.1x authentication

Strany 454 - Queueing

Network OS NETCONF Operations Guide 47553-1003231-02802.1x authentication configuration tasks30Before running the readiness check, you can set a timeo

Strany 455 - Verifying QoS trust

476 Network OS NETCONF Operations Guide53-1003231-02Interface-specific administrative tasks for 802.1x30<ok/></rpc-reply>Interface-specifi

Strany 456

Network OS NETCONF Operations Guide 47753-1003231-02Interface-specific administrative tasks for 802.1x30<config><interface xmlns="urn:br

Strany 457

Network OS NETCONF Operations Guide 1953-1003231-02Managing the configuration2</static></mac-address-table></config></edit-config

Strany 458

478 Network OS NETCONF Operations Guide53-1003231-02Interface-specific administrative tasks for 802.1x303. Under the <gigabitethernet>, <teng

Strany 459

Network OS NETCONF Operations Guide 47953-1003231-02Interface-specific administrative tasks for 802.1x303. Under the <gigabitethernet>, <teng

Strany 460 - DSCP values User priority

480 Network OS NETCONF Operations Guide53-1003231-02Interface-specific administrative tasks for 802.1x30• force-authorized—802.1x authentication is di

Strany 461 - Verifying DSCP trust

Network OS NETCONF Operations Guide 48153-1003231-02Interface-specific administrative tasks for 802.1x30<rpc-reply message-id="2406" xmln

Strany 462 - Creating a DSCP mutation map

482 Network OS NETCONF Operations Guide53-1003231-02Checking 802.1x configurations30Checking 802.1x configurationsYou cannot obtain 802.1x authenticat

Strany 463

Network OS NETCONF Operations Guide 48353-1003231-02Checking 802.1x configurations30<protocol-version>2<protocol-version><quiet-period&

Strany 464

484 Network OS NETCONF Operations Guide53-1003231-02Checking 802.1x configurations30

Strany 465

Network OS NETCONF Operations Guide 48553-1003231-02Chapter31Configuring sFlow In this chapter•sFlow configuration with NETCONF overview. . . . . . .

Strany 466

486 Network OS NETCONF Operations Guide53-1003231-02Configuring the sFlow protocol globally31To configure sFlow globally, perform the following steps.

Strany 467

Network OS NETCONF Operations Guide 48753-1003231-02Interface-specific administrative tasks for sFlow31Interface-specific administrative tasks for sFl

Strany 468

20 Network OS NETCONF Operations Guide53-1003231-02Managing the configuration2The most common configuration management operation is to copy the runnin

Strany 469 - Traffic class mapping

488 Network OS NETCONF Operations Guide53-1003231-02Interface-specific administrative tasks for sFlow31<tengigabitethernet><name>1/0/16<

Strany 470

Network OS NETCONF Operations Guide 48953-1003231-02Flow-based sFlow31</interface></config></edit-config></rpc><rpc-reply m

Strany 471

490 Network OS NETCONF Operations Guide53-1003231-02Flow-based sFlow31 </access-list> </mac> </config> <

Strany 472

Network OS NETCONF Operations Guide 49153-1003231-02Flow-based sFlow31 <po-name>new_policy_map</po-name> </policy-ma

Strany 473 - Mapping DSCP-to-Traffic-Class

492 Network OS NETCONF Operations Guide53-1003231-02Flow-based sFlow31 <target> <running></running> </target>

Strany 474

Network OS NETCONF Operations Guide 49353-1003231-02Flow-based sFlow31Retrieving flow-based sFlow statisticsUse the <get-config> RPC to retrieve

Strany 475

494 Network OS NETCONF Operations Guide53-1003231-02Flow-based sFlow31

Strany 476

Network OS NETCONF Operations Guide 49553-1003231-02Chapter32Configuring Switched Port AnalyzerIn this chapter•SPAN configuration with NETCONF overvie

Strany 477 - Congestion control

496 Network OS NETCONF Operations Guide53-1003231-02Configuring ingress SPAN, egress SPAN, or bidirectional SPAN321. Issue the <edit-config> RPC

Strany 478 - Configuring CoS thresholds

Network OS NETCONF Operations Guide 49753-1003231-02Deleting a SPAN connection from a session32</session></monitor></config></edi

Strany 479 - Random Early Detection

Network OS NETCONF Operations Guide 2153-1003231-02Disconnecting from a NETCONF session2Disconnecting from a NETCONF sessionTo disconnect from a NETCO

Strany 480 - Ethernet Pause

498 Network OS NETCONF Operations Guide53-1003231-02Deleting a SPAN session32 xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" operation=&quo

Strany 481 - Enabling Ethernet Pause

Network OS NETCONF Operations Guide 49953-1003231-02SPAN in management cluster32 </dest-tengigabitethernet><dest-tengigabitethernet-val>1/

Strany 482 - Enabling Ethernet PFC

500 Network OS NETCONF Operations Guide53-1003231-02Configuring RSPAN32<session-number>1</session-number><description>Hello World<

Strany 483 - Multicast rate limiting

Network OS NETCONF Operations Guide 50153-1003231-02Configuring RSPAN324. Under the <vlan> node, set the value to <remote-span> to make th

Strany 484 - Configuring BUM storm control

502 Network OS NETCONF Operations Guide53-1003231-02Configuring RSPAN32The following example configures an RSPAN session. It designates 1/0/11 as the

Strany 485 - Scheduling

Network OS NETCONF Operations Guide 50353-1003231-02SectionIVNetwork OS Layer 3 Routing FeaturesThis section describes Layer 3 routing features of Net

Strany 486 - Multicast queue scheduling

504 Network OS NETCONF Operations Guide53-1003231-02

Strany 487 - Creating a CEE map

Network OS NETCONF Operations Guide 50553-1003231-02Chapter32IP Route PolicyIn this chapter•IP route policy configuration with NETCONF overview. . . .

Strany 488

506 Network OS NETCONF Operations Guide53-1003231-02Configuring a route map32a. In the <name> element, specify the IP prefix list name.b. In the

Strany 489 - Defining a priority-table map

Network OS NETCONF Operations Guide 50753-1003231-02Configuring a route map321. Issue the <edit-config> RPC to configure the <hide-routemap-h

Strany 490 - Verifying the CEE maps

22 Network OS NETCONF Operations Guide53-1003231-02Disconnecting from a NETCONF session2

Strany 491 - Brocade VCS Fabric QoS

508 Network OS NETCONF Operations Guide53-1003231-02Configuring and activating an IP route policy32<match><ip><next-hop><prefix-l

Strany 492

Network OS NETCONF Operations Guide 50953-1003231-02Configuring and activating an IP route policy32<target><running/></target><co

Strany 493 - Port-based Policier

510 Network OS NETCONF Operations Guide53-1003231-02Configuring and activating an IP route policy322. Create the prefix and next hop for each static r

Strany 494

Network OS NETCONF Operations Guide 51153-1003231-02Configuring and activating an IP route policy32<area-id>0</area-id></area></o

Strany 495

512 Network OS NETCONF Operations Guide53-1003231-02Configuring and activating an IP route policy32

Strany 496 - Configuring the policy map

Network OS NETCONF Operations Guide 51353-1003231-02Chapter33IP Route ManagementIn this chapter•IP route management with NETCONF overview. . . . . . .

Strany 497

514 Network OS NETCONF Operations Guide53-1003231-02Configuring static routes33Specifying the next hop gatewayTo specify the next hop gateway, perform

Strany 498

Network OS NETCONF Operations Guide 51553-1003231-02Configuring static routes331. Issue the <edit-config> RPC to configure the <rbridge-id>

Strany 499 - Policy maps

516 Network OS NETCONF Operations Guide53-1003231-02Other routing operations33Configuring the default route The default route is configured with an al

Strany 500 - Class maps

Network OS NETCONF Operations Guide 51753-1003231-02Other routing operations33<rbridge-id xmlns="urn:brocade.com:mgmt:brocade-rbridge">

Strany 501 - Priority maps

Network OS NETCONF Operations Guide 2353-1003231-02Chapter3Basic Switch ManagementIn this chapter•Basic switch management with NETCONF overview . . .

Strany 502 - Configuring Auto-QOS

518 Network OS NETCONF Operations Guide53-1003231-02Other routing operations33<rpc message-id="3305" xmlns="urn:ietf:params:xml:ns:n

Strany 503

Network OS NETCONF Operations Guide 51953-1003231-02Chapter34Configuring OSPFIn this chapter•OSPF configuration with NETCONF overview . . . . . . . .

Strany 504

520 Network OS NETCONF Operations Guide53-1003231-02OSPF over VRF34OSPF over VRFWith Network OS 4.0 and later, OSPF can run over multiple Virtual Forw

Strany 505

Network OS NETCONF Operations Guide 52153-1003231-02OSPF in a VCS environment34f. Assign the VE interface to the area created in step c.g. Enable the

Strany 506

522 Network OS NETCONF Operations Guide53-1003231-02OSPF in a VCS environment34c. Create an OSPF area on Router RB2.d. Configure a virtual Ethernet (V

Strany 507 - Disabling 802.1x globally

Network OS NETCONF Operations Guide 52353-1003231-02Performing basic OSPF configuration343. Assign VLAN 1001 to a VLAG. Performing basic OSPF configur

Strany 508 - 802.1x readiness check

524 Network OS NETCONF Operations Guide53-1003231-02Performing basic OSPF configuration34Enabling OSPF on the routerOSPF can be activated only in the

Strany 509

Network OS NETCONF Operations Guide 52553-1003231-02Performing basic OSPF configuration34</rbridge-id></config></edit-config></rp

Strany 510

526 Network OS NETCONF Operations Guide53-1003231-02Performing basic OSPF configuration34<ok/></rpc-reply>Assigning a totally stubby areaB

Strany 511

Network OS NETCONF Operations Guide 52753-1003231-02Performing basic OSPF configuration34Assigning a Not-So-Stubby Area The OSPF Not-So-Stubby-Area (N

Strany 512

24 Network OS NETCONF Operations Guide53-1003231-02Connecting to the switch3Connecting to the switchFor NETCONF operations, you must connect to the sw

Strany 513

528 Network OS NETCONF Operations Guide53-1003231-02Performing basic OSPF configuration34<rbridge-id>101</rbridge-id><router><osp

Strany 514

Network OS NETCONF Operations Guide 52953-1003231-02Performing basic OSPF configuration34<normal/><range><range-address>193.45.0.0&l

Strany 515

530 Network OS NETCONF Operations Guide53-1003231-02Performing basic OSPF configuration34<database-filter><all-out/></database-filter&g

Strany 516

Network OS NETCONF Operations Guide 53153-1003231-02Performing basic OSPF configuration34</target><config><rbridge-id xmlns="urn:b

Strany 517 - Configuring sFlow

532 Network OS NETCONF Operations Guide53-1003231-02Performing basic OSPF configuration34Changing other settingsRefer to the Network OS YANG Reference

Strany 518

Network OS NETCONF Operations Guide 53353-1003231-02Chapter35Configuring VRRPIn this chapter•VRRP and VRRP-E configuration with NETCONF overview . . .

Strany 519

534 Network OS NETCONF Operations Guide53-1003231-02VRRP and VRRP-E configuration with NETCONF overview35Figure 8 shows an example of a basic VRRP set

Strany 520

Network OS NETCONF Operations Guide 53553-1003231-02VRRP basic configuration example35• Backup—Routers that belong to a virtual router but are not the

Strany 521 - Flow-based sFlow

536 Network OS NETCONF Operations Guide53-1003231-02VRRP basic configuration example35</address></ip-config></ip>7. Assign Router 1

Strany 522

Network OS NETCONF Operations Guide 53753-1003231-02VRRP basic configuration example35</vrrp></tengigabitethernet></interface></c

Strany 523

Network OS NETCONF Operations Guide 2553-1003231-02Switch attributes3• A host name can be from 1 through 30 characters long. It must begin with a lett

Strany 524

538 Network OS NETCONF Operations Guide53-1003231-02VRRP basic configuration example357. Assign Router 2 to the same VRRP group as Router 1 and give t

Strany 525

Network OS NETCONF Operations Guide 53953-1003231-02Enabling preemption35</virtual-ip></vrrp></tengigabitethernet></interface>

Strany 526

540 Network OS NETCONF Operations Guide53-1003231-02Enabling preemption35The procedure for enabling pre-emption differs depending on the Ethernet link

Strany 527

Network OS NETCONF Operations Guide 54153-1003231-02Configuring the track priority35Enabling preemption for a VE interfaceTo enable preemption for a V

Strany 528

542 Network OS NETCONF Operations Guide53-1003231-02Configuring the track priority35The procedure for configuring track priority differs depending on

Strany 529

Network OS NETCONF Operations Guide 54353-1003231-02Configuring the track priority35</interface></track></vrrp></tengigabitethern

Strany 530 - Deleting a SPAN session

544 Network OS NETCONF Operations Guide53-1003231-02Enabling short-path forwarding (VRRP-E only)35<interface-type>tengigabitethernet </interf

Strany 531 - SPAN in management cluster

Network OS NETCONF Operations Guide 54553-1003231-02Configuring a multigroup virtual router cluster35</interface></interface-vlan></con

Strany 532 - Configuring RSPAN

546 Network OS NETCONF Operations Guide53-1003231-02Configuring a multigroup virtual router cluster35Router 1 is the master for Group 1 (master priori

Strany 533

Network OS NETCONF Operations Guide 54753-1003231-02Configuring a multigroup virtual router cluster35</protocol><interface xmlns="urn:br

Strany 534 - VLAN 1010 as the destination

26 Network OS NETCONF Operations Guide53-1003231-02Disabling or enabling a chassis3<switch-attributes><rbridge-id>27</rbridge-id><

Strany 535

548 Network OS NETCONF Operations Guide53-1003231-02Configuring a multigroup virtual router cluster35<rpc message-id="3506" xmlns="u

Strany 536

Network OS NETCONF Operations Guide 54953-1003231-02Configuring a multigroup virtual router cluster35NOTE(For VRRP-E only) The virtual IP address cann

Strany 537 - IP Route Policy

550 Network OS NETCONF Operations Guide53-1003231-02Configuring a multigroup virtual router cluster35Configuring Router 2 as master for second virtual

Strany 538 - Configuring a route map

Network OS NETCONF Operations Guide 55153-1003231-02Verifying VRRP and VRRP-E configuration35</edit-config></rpc><rpc-reply message-id=

Strany 539

552 Network OS NETCONF Operations Guide53-1003231-02Verifying VRRP and VRRP-E configuration35

Strany 540

Network OS NETCONF Operations Guide 55353-1003231-02Chapter36Configuring VRFIn this chapter•VRF configuration with NETCONF overview . . . . . . . . .

Strany 541

554 Network OS NETCONF Operations Guide53-1003231-02Configuring VRF36Configuring VRF Typical full-blown implementations of VRFs are designed to suppor

Strany 542

Network OS NETCONF Operations Guide 55553-1003231-02Configuring VRF36 <vrf-name>orange</vrf-name> <route-distiniguish

Strany 543

556 Network OS NETCONF Operations Guide53-1003231-02Configuring VRF364. Configure the static ARP for the interface. The static route and ARP must be c

Strany 544

Network OS NETCONF Operations Guide 55753-1003231-02Chapter37Configuring BGPIn this chapter•BGP configuration with NETCONF overview. . . . . . . . . .

Strany 545 - IP Route Management

Network OS NETCONF Operations Guide 2753-1003231-02Rebooting a Brocade switch3• Enable the chassis to bring the interfaces back online. All interfaces

Strany 546

558 Network OS NETCONF Operations Guide53-1003231-02Configuring BGP37Enabling BGP on an RBridgeTo enable BGP on an RBridge, configure BGP with the def

Strany 547

Network OS NETCONF Operations Guide 55953-1003231-02Configuring BGP37<rpc-reply message-id="3500" xmlns="urn:ietf:params:xml:ns:netc

Strany 548 - Other routing operations

560 Network OS NETCONF Operations Guide53-1003231-02Configuring BGP37 <rbridge-id>188</rbridge-id> <r

Strany 549 - Enabling IP load sharing

Network OS NETCONF Operations Guide 56153-1003231-02Configuring BGP37• default-metric—Set metric of redistributed routes• maximum-paths—Forward packet

Strany 550

562 Network OS NETCONF Operations Guide53-1003231-02Configuring BGP37 </ipv4> </address

Strany 551 - Configuring OSPF

Network OS NETCONF Operations Guide 56353-1003231-02Chapter38Configuring IGMPIn this chapter•IGMP configuration with NETCONF overview . . . . . . . .

Strany 552 - OSPF in a VCS environment

564 Network OS NETCONF Operations Guide53-1003231-02Configuring IGMP snooping385. Under the <snooping> node, include the empty <qenable> n

Strany 553

Network OS NETCONF Operations Guide 56553-1003231-02Configuring IGMP snooping querier38Configuring IGMP snooping querierIf your multicast traffic is n

Strany 554

566 Network OS NETCONF Operations Guide53-1003231-02Monitoring IGMP snooping38<ip><igmp xmlns="urn:brocade.com:mgmt:brocade-igmp-snoopi

Strany 555 - OSPF configuration rules

Network OS NETCONF Operations Guide 56753-1003231-02Chapter39Configuring DHCP RelayIn this chapter•DHCP Relay configuration with NETCONF overview . .

Strany 556 - Disabling OSPF on the router

vi Network OS NETCONF Operations Guide53-1003231-02Retrieving configuration data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 557 - Assigning OSPF areas

28 Network OS NETCONF Operations Guide53-1003231-02Interfaces, slots, and modules3To perform a reboot of the entire modular chassis, issue the <ha&

Strany 558

568 Network OS NETCONF Operations Guide53-1003231-02Configuring DHCP Relay391. Issue the <edit-config> RPC to configure the <interface> no

Strany 559

Network OS NETCONF Operations Guide 56953-1003231-02Configuring DHCP Relay39</tengigabitethernet></interface></config></edit-conf

Strany 560

570 Network OS NETCONF Operations Guide53-1003231-02Removing the DHCP Relay address39<rpc-reply message-id="1202" xmlns="urn:ietf:pa

Strany 561

Network OS NETCONF Operations Guide 57153-1003231-02SectionVAppendixesThis section contains the following appendix:•Managing NETCONF . . . . . . . .

Strany 562 - Assigning virtual links

572 Network OS NETCONF Operations Guide53-1003231-02

Strany 563

Network OS NETCONF Operations Guide 57353-1003231-02AppendixAManaging NETCONFIn this appendix•Viewing NETCONF client capabilities . . . . . . . . . .

Strany 564 - Changing other settings

574 Network OS NETCONF Operations Guide53-1003231-02Viewing NETCONF statistics and session informationA<rpc-reply xmlns="urn:ietf:params:xml:n

Strany 565 - Configuring VRRP

Network OS NETCONF Operations Guide 57553-1003231-02Viewing NETCONF statistics and session informationATo view the NETCONF datastores on the NETCONF s

Strany 566

576 Network OS NETCONF Operations Guide53-1003231-02Viewing NETCONF statistics and session informationA

Strany 567 - Configuring the master router

Network OS NETCONF Operations Guide 57753-1003231-02IndexNumerics802.1x authenticationdisabling globally, 475disabling on an interface, 481enabling gl

Strany 568

Network OS NETCONF Operations Guide 2953-1003231-02Interfaces, slots, and modules3<?xml version="1.0" encoding="UTF-8"?><

Strany 569 - Configuring the backup router

578 Network OS NETCONF Operations Guide53-1003231-02CCA certificate, 215deleting, 216importing, 215capabilitiesNETCONF client, overview, 11NETCONF cli

Strany 570

Network OS NETCONF Operations Guide 57953-1003231-02EECMP load balancing, 94edge detection, 356edge portenabling, 333edge port, enabling a CEE interfa

Strany 571 - Enabling preemption

580 Network OS NETCONF Operations Guide53-1003231-02Gget RPC, 7, 11get-config RPC, 7, 11get-interface-detail RPC, 67, 283, 294get-mac-acl-for-intf RPC

Strany 572

Network OS NETCONF Operations Guide 58153-1003231-02licenseID, retrieving, 65installing, 67reserving, 69upgrading, 66license key, 65line card monitori

Strany 573

582 Network OS NETCONF Operations Guide53-1003231-02MSTPbridge forward delay, setting, 342bridge maximum aging time, setting, 344bridge priority, sett

Strany 574

Network OS NETCONF Operations Guide 58353-1003231-02policerclass map, configuringclass map, retrieving, 468configuring, 461policy map, binding to inte

Strany 575

584 Network OS NETCONF Operations Guide53-1003231-02QQoSauto-QoS, 470Brocade VCA Fabric, configuring in, 460CEE map, applying, 458CEE map, creating, 4

Strany 576

Network OS NETCONF Operations Guide 58553-1003231-02remote procedure call (RPC)See RPC, 19removingalias members, 107revision number, specifying for MS

Strany 577

586 Network OS NETCONF Operations Guide53-1003231-02RSTPbridge forward delay, setting, 342bridge hello time, setting, 348bridge maximum aging time, se

Strany 578

Network OS NETCONF Operations Guide 58753-1003231-02startup capability, 10startup-config, 19static routesdefault route, configuring, 516egress interfa

Strany 579

30 Network OS NETCONF Operations Guide53-1003231-02Interfaces, slots, and modules3The example RPCs shown in the following procedure replace the card i

Strany 580

588 Network OS NETCONF Operations Guide53-1003231-02UUniDirectional Link Detection (UDLD)configuring, 373unlock action, 178unlock RPC, 7USBdownloading

Strany 581

Network OS NETCONF Operations Guide 58953-1003231-02VRRPbackup router, configuring, 537backup router, definition, 535configuration, verifying, 551mast

Strany 582

590 Network OS NETCONF Operations Guide53-1003231-02

Strany 583

Network OS NETCONF Operations Guide 3153-1003231-02Interfaces, slots, and modules3<running/></target><config><rbridge-id xmlns=&q

Strany 584

32 Network OS NETCONF Operations Guide53-1003231-02Configuring a switch banner3<global-lc-holder xmlns="urn:brocade.com:mgmt:brocade-linecard-

Strany 585 - Configuring VRF

Network OS NETCONF Operations Guide 3353-1003231-02supportSave data3</filter></get-config></rpc><rpc-reply message-id="313&q

Strany 586

34 Network OS NETCONF Operations Guide53-1003231-02supportSave data3• (VCS Fabric mode only) In the <rbridge-id> field, specify the RBridge ID o

Strany 587

Network OS NETCONF Operations Guide 3553-1003231-02supportSave data3<host>10.38.33.131</host><directory>/home/admin/support</dire

Strany 588 - Enabling VRRP for VRF

36 Network OS NETCONF Operations Guide53-1003231-02supportSave data3<rpc xmlns="urn:ietf:params:xml:ns:netconf:base:1.0" message-id="

Strany 589 - Configuring BGP

Network OS NETCONF Operations Guide 3753-1003231-02supportSave data3</copy></rpc-reply>

Strany 590 - Disabling BGP on an RBridge

Network OS NETCONF Operations Guide vii53-1003231-02Chapter 4 Network Time ProtocolIn this chapter . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 591 - Configuring BGP global mode

38 Network OS NETCONF Operations Guide53-1003231-02Syslog server setup3Enabling or disabling FFDCFirst failure data capture (FFDC) is enabled by defau

Strany 592

Network OS NETCONF Operations Guide 3953-1003231-02Syslog server setup3You can configure up to four secure or non-secure syslog servers. When you add

Strany 593

40 Network OS NETCONF Operations Guide53-1003231-02Syslog server setup3<syslogip>192.168.163.236</syslogip></syslog-server></logg

Strany 594

Network OS NETCONF Operations Guide 4153-1003231-02Syslog server setup3<edit-config><target><running/></target><config>&

Strany 595 - Configuring IGMP

42 Network OS NETCONF Operations Guide53-1003231-02Syslog server setup3<user>testuser</user><password>password</password><h

Strany 596

Network OS NETCONF Operations Guide 4353-1003231-02RASlog configuration3<edit-config><target><running/></target><config>

Strany 597

44 Network OS NETCONF Operations Guide53-1003231-02RASlog configuration3<severity>informational</severity><message>Port-profile aa1

Strany 598 - Monitoring IGMP snooping

Network OS NETCONF Operations Guide 4553-1003231-02Audit log configuration3Audit log configurationAudit log messages contain user information such as

Strany 599 - Configuring DHCP Relay

46 Network OS NETCONF Operations Guide53-1003231-02Audit log configuration3

Strany 600

Network OS NETCONF Operations Guide 4753-1003231-02Chapter4Network Time ProtocolIn this chapter•Time management with NETCONF overview . . . . . . . .

Strany 601

viii Network OS NETCONF Operations Guide53-1003231-02Chapter 7 SNMPIn this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 602

48 Network OS NETCONF Operations Guide53-1003231-02Time zone settings41. Issue the <clock-set-datetime> action located in the urn:brocade.com:mg

Strany 603 - Appendixes

Network OS NETCONF Operations Guide 4953-1003231-02Time zone settings4</data></action></rpc><rpc-reply xmlns="urn:ietf:param

Strany 604

50 Network OS NETCONF Operations Guide53-1003231-02Network Time Protocol4Network Time ProtocolNetwork Time Protocol (NTP) maintains uniform time acros

Strany 605 - Managing NETCONF

Network OS NETCONF Operations Guide 5153-1003231-02Network Time Protocol4Retrieving an NTP server IP addressUse the <show-ntp> custom RPC locate

Strany 606 - • Statistics

52 Network OS NETCONF Operations Guide53-1003231-02Network Time Protocol4</rpc><rpc-reply message-id="302" xmlns="urn:ietf:par

Strany 607

Network OS NETCONF Operations Guide 5353-1003231-02Chapter5Installing and Maintaining FirmwareIn this chapter•Firmware upgrade with NETCONF overview.

Strany 608

54 Network OS NETCONF Operations Guide53-1003231-02Preparing for a firmware download5• Use the <fwdl-status> custom RPC to query the status of a

Strany 609 - Numerics

Network OS NETCONF Operations Guide 5553-1003231-02Preparing for a firmware download5<show-firmware-version xmlns="urn:brocade.com:mgmt:brocad

Strany 610

56 Network OS NETCONF Operations Guide53-1003231-02Downloading the firmware from a remote server5Downloading the firmware from a remote serverUnder no

Strany 611

Network OS NETCONF Operations Guide 5753-1003231-02Downloading the firmware from a remote server5<rpc-reply xmlns="urn:ietf:params:xml:ns:netc

Strany 612

Network OS NETCONF Operations Guide ix53-1003231-02Chapter 10 Administering ZonesIn this chapter . . . . . . . . . . . . . . . . . . . . . . . . . . .

Strany 613

58 Network OS NETCONF Operations Guide53-1003231-02Downloading firmware from a USB device5<rpc message-id="404" xmlns="urn:ietf:para

Strany 614

Network OS NETCONF Operations Guide 5953-1003231-02Evaluating a firmware upgrade5</data></action></rpc><rpc-reply xmlns="urn

Strany 615

60 Network OS NETCONF Operations Guide53-1003231-02Evaluating a firmware upgrade5• To enable firmware restoration on a modular switch with two managem

Strany 616

Network OS NETCONF Operations Guide 6153-1003231-02Evaluating a firmware upgrade5• <directory>—The directory on the remote server where the firm

Strany 617

62 Network OS NETCONF Operations Guide53-1003231-02Evaluating a firmware upgrade5<control-processor-vendor>Freescale Semiconductor </control-

Strany 618

Network OS NETCONF Operations Guide 6353-1003231-02Evaluating a firmware upgrade5<rpc-reply message-id="411" xmlns="urn:ietf:params:

Strany 619

64 Network OS NETCONF Operations Guide53-1003231-02Firmware upgrade in Brocade VCS Fabric mode53. Issue the <show-firmware-version> custom RPC a

Strany 620

Network OS NETCONF Operations Guide 6553-1003231-02Chapter6Administering LicensesIn this chapter•Licensing with NETCONF overview . . . . . . . . . . .

Strany 621

66 Network OS NETCONF Operations Guide53-1003231-02Obtaining a license key6To retrieve the switch license ID, issue the <show>/<license>/&

Strany 622

Network OS NETCONF Operations Guide 6753-1003231-02Installing or removing a license6Installing or removing a licenseRefer to the Network OS Administra

Komentáře k této Příručce

Žádné komentáře