Brocade Network Advisor SAN User Manual v12.3.0 Uživatelský manuál Strana 97
- Strana / 194
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Brocade Network Advisor SAN User Manual 45
53-1003154-01
Viewing the fabric discovery state
3
4. Click OK on the confirmation message.
The rediscovered fabric displays in the Discovered Fabrics table.
5. Click Close on the Discover Fabrics dialog box.
Deleting a fabric
To delete a fabric permanently from discovery, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
2. Select one or more switches that you want to delete permanently from discovery in the
Previously Discovered Addresses table.
3. Click Delete.
4. Click OK on the confirmation message.
5. Click Close on the Discover Fabrics dialog box.
Viewing the fabric discovery state
The Management application enables you to view device status through the Discover Setup dialog
box.
To view the discovery status of a device, complete the following steps.
1. Select Discover > Fabrics.
The Discover Fabrics dialog box displays.
2. Right-click a fabric and select Expand All to show all devices in the fabric.
The Name field displays the discovery status icons in front of the device name. The following
table illustrates and describes the icons that indicate the current status of the discovered
devices.
TABLE 10 Discovery Status Icons
Icon Description
Displays when the fabric or host is managed and the management status is okay.
Displays when the switch is managed and the switch management status is not okay.
Displays when the fabric, switch, or host is not managed or not monitored.
- Brocade Network Advisor 1
- Document History 2
- Contents 5
- Chapter 2 Patches 6
- Chapter 3 Discovery 6
- Chapter 6 Web Client 10
- Chapter 8 View Management 12
- Chapter 9 Call Home 13
- Chapter 10 Third-party tools 14
- Chapter 13 Host Port Mapping 17
- Chapter 15 Host Management 18
- Chapter 19 Virtual Fabrics 21
- Chapter 21 Zoning 25
- Chapter 23 Fabric Binding 29
- Chapter 24 Port Fencing 29
- Chapter 25 FICON Environments 30
- Chapter 26 Deployment Manager 30
- Chapter 28 Performance Data 31
- Chapter 29 Flow Vision 32
- Chapter 30 Frame Monitor 33
- Chapter 31 Policy Monitor 33
- Chapter 32 Fault Management 34
- Chapter 34 Technical Support 37
- Chapter 35 Reports 37
- Appendix A Application menus 38
- Appendix C Event Categories 38
- Appendix D User Privileges 38
- Appendix E Device Properties 38
- Appendix G Troubleshooting 39
- Appendix H Database Fields 39
- About This Document 43
- What’s new in this document 48
- Document conventions 49
- Notice to the reader 50
- Additional information 50
- Getting technical help 51
- Document feedback 52
- Getting Started 53
- FIGURE 1 Main window 54
- Management server and client 55
- Launching a remote client 56
- Logging into the web client 57
- • FTP server 58
- • Server IP 58
- • Server Ports 58
- • SMI Agent 58
- Viewing active sessions 62
- Disconnecting users 63
- Viewing server properties 63
- Viewing port status 64
- Server and client ports 65
- Keyboard shortcuts 69
- Look and feel customization 70
- Product improvement 71
- Data transfer 72
- PostgreSQL database 73
- > ./edb_psqlodbc.bin 75
- Feature Fabric OS 81
- Installing a patch 83
- Uninstalling a patch 84
- Discovery 87
- FCS policy and seed switches 88
- Discovering fabrics 89
- Attribute Value 91
- Configuring SNMP credentials 94
- Rediscovering a fabric 96
- Deleting a fabric 97
- • New Discovery Pending 98
- • “Deleting a fabric” 99
- Problem Resolution 100
- SAN Fabric monitoring 101
- SAN Seed switch 105
- Seed switch requirements 106
- Seed switch failover 106
- Changing the seed switch 106
- Host discovery 107
- Importing Hosts from a fabric 112
- • CIM Server unknown failure 117
- • HCM Agent connection failed 117
- Host_IP_Address 118
- VM Manager discovery 119
- Editing a VM manager 121
- • Active 123
- • Failed – Not reachable 123
- • Discovery pending 124
- • Excluded 124
- Application Configuration 125
- Server Data backup 127
- Configuring backup 128
- Enabling backup 130
- Disabling backup 130
- Viewing the backup status 131
- Changing the backup interval 131
- Starting immediate backup 132
- Reviewing backup events 132
- Server Data restore 133
- SAN data collection 134
- SAN display settings 137
- Resetting your display 138
- Importing the OUI file 139
- Editing the product type 139
- SAN End node display 140
- SAN Ethernet loss events 141
- Event storage settings 142
- Flyover settings 143
- Name settings 146
- Fixing duplicate names 148
- Viewing names 149
- Adding a name to a new device 151
- Removing a name from a device 152
- Editing names 152
- Exporting names 152
- Importing Names 153
- Searching for a device by WWN 154
- Configuring the server name 155
- Configuring login security 156
- Syslog Registration settings 157
- Software Configuration 160
- Certificates 161
- Client export port settings 167
- Client/Server IP 168
- • Select All. Go to step 4 169
- Memory allocation settings 172
- Configuring asset polling 174
- TABLE 17 Network size status 175
- Configuring SAN communication 176
- FTP/SCP/SFTP server settings 177
- Server port settings 182
- Support mode settings 183
- FIPS Support 185
- Fabric tracking 185
- Disabling fabric tracking 186
- User Account Management 191
- User accounts 195
- Editing a user account 197
- Copying a user account 197
- Exporting a user account 198
- Importing a user account 199
- Disabling a user account 200
- Enabling a user account 200
- Deleting a user account 201
- Unlocking a user account 201
- Creating a new role 201
- Editing a role 202
- Copying a role 203
- Deleting a role 203
- Adding privileges to a role 203
- Areas of responsibility 205
- Editing an AOR 206
- Copying an AOR 207
- Deleting an AOR 207
- Assigning products to an AOR 207
- Removing products from an AOR 208
- Password policies 209
- User profiles 211
- Viewing your user profile 212
- Editing your user profile 212
- Changing your password 213
- Viewing your password policy 214
- Resetting optional messages 214
- Web Client 217
- Dashboard 218
- Dashboard toolbar 220
- General dashboard functions 220
- Dashboard customization 221
- • All products and fabrics 222
- • Any SAN fabric 222
- Setting the time interval 223
- Default dashboards 224
- Status widgets 225
- Events widget 226
- Host Adapter Inventory widget 227
- SAN Inventory widget 229
- SAN Status widget 231
- Status widget 232
- VM Alarms widget 232
- Port Health Violations widget 235
- Performance monitors 236
- Top Port C3 Discards monitor 239
- Top Port CRC Errors monitor 241
- Top Port Link Resets monitor 244
- Top Port Receive EOF monitor 246
- Top Port Sync Losses monitor 248
- Top Port Traffic monitor 250
- Inventory 262
- Fabric summary view 263
- FIGURE 82 Host Details table 264
- FIGURE 84 Events table 265
- Viewing fabric properties 267
- Product summary view 268
- FIGURE 89 Port Details area 269
- FIGURE 90 Violations table 271
- FIGURE 91 Events table 272
- Viewing product properties 276
- Port summary view 277
- FIGURE 94 Port summary 278
- FIGURE 95 Violations table 280
- FIGURE 97 Events page 283
- Table functions 284
- FIGURE 98 Reports page 285
- Reports toolbar 286
- General report page functions 286
- Generating a report 287
- Generated reports 288
- Viewing generated reports 289
- Report schedules 290
- Configuring a new schedule 291
- E-mailing reports 295
- Editing a schedule 296
- Report templates 297
- Viewing report templates 298
- Viewing a report 298
- Exporting report templates 299
- Importing report templates 299
- Sharing report templates 299
- Default reports 300
- Fabric Summary report 301
- Fabric Ports report 305
- Switch Report 307
- Zone Summary reports 309
- Report content and functions 313
- Dashboard Management 315
- FIGURE 110 Dashboard tab 316
- Dashboard messages 318
- Dashboard Privileges 319
- Accessing a dashboard 320
- Filtering the dashboards list 320
- Setting the dashboard display 323
- Setting the network scope 326
- • Any system-defined group 327
- Setting the time scope 329
- Customizing the time scope 330
- Dashboard playback 331
- Bottleneck Graph dialog box 335
- Monitor types 376
- Measures 376
- - Wireless 378
- • Traffic flows 378
- TABLE 29 Port measures types 383
- Common 392
- Wireless 393
- Traffic flow monitor types 394
- Traffic flow measures 394
- View Management 403
- SAN tab overview 404
- SAN main toolbar 405
- View All list 406
- Port Display buttons 407
- Connectivity Map toolbar 407
- Product List 408
- Connectivity Map 409
- Utilization Legend 410
- Resizing the Minimap 413
- Status bar 414
- Icon legend 415
- Host product icons 416
- SAN group icons 417
- Host group icons 417
- SAN port icons 418
- SAN product status icons 418
- Event icons 419
- Customizing the main window 420
- Exporting the topology 421
- Displaying columns 422
- Changing the order of columns 423
- Resizing the columns 423
- Sorting table information 423
- Copying table information 423
- Exporting table information 424
- Product List customization 425
- Editing a property label 426
- Deleting a property label 426
- Searching for a device 427
- Restricting a search by node 428
- Searching for an exact match 428
- SAN view management overview 429
- Editing a customized view 431
- Deleting a customized view 432
- Copying a view 433
- SAN topology layout 434
- Changing the product label 438
- Changing the port label 438
- Changing the port display 438
- Grouping on the topology 439
- Call Home 441
- overview 442
- System requirements 443
- Showing a Call Home center 446
- Hiding a Call Home center 446
- Editing a Call Home center 447
- Enabling a Call Home center 454
- Enabling supportSave 454
- Disabling a Call Home center 455
- Viewing Call Home status 456
- Defining an event filter 458
- Third-party tools 463
- Launching a Telnet session 464
- Launching an Element Manager 465
- Launching Web Tools 466
- Launching FCR configuration 466
- Launching Name Server 467
- Launching HCM Agent 468
- Launching Fabric Watch 469
- Adding a tool 469
- • Fabric and switch details 475
- Registering a SCOM server 476
- Editing a SCOM server 477
- Removing a SCOM server 477
- Server Management Console 479
- Services tab 480
- Refreshing the server status 481
- Stopping all services 481
- Stopping the CIMOM services 481
- Starting all services 482
- Restarting all services 482
- Ports tab 483
- AAA Settings tab 484
- FIGURE 177 AAA Settings tab 485
- Configuring a Radius server 486
- Configuring an LDAP server 489
- Configuring a TACACS+ server 492
- • Local Database 495
- Radius server configuration 497
- LDAP server configuration 499
- Loading an AD group 504
- TACACS+ server configuration 505
- Restore tab 506
- HCM Upgrade tab 508
- SMI Agent Configuration Tool 509
- SLP on UNIX systems 514
- SLP on Windows systems 514
- Home tab 515
- Authentication tab 516
- FIGURE 190 Authentication tab 517
- CIMOM tab 519
- Configuring the CIMOM log 521
- Certificate Management tab 522
- Viewing a certificate 523
- Exporting a certificate 523
- Summary tab 524
- FIGURE 193 Summary tab 525
- TABLE 39 525
- SAN Device Configuration 527
- Adaptive backup 529
- Viewing switch configurations 532
- Deleting a configuration 538
- Exporting a configuration 539
- Importing a configuration 539
- FIGURE 201 Compare dialog box 540
- Replicating configurations 544
- Configuration file management 545
- Step 3. Source Location 545
- Step 4. Source Configuration 545
- Step 5. Destination Switches 546
- TABLE 44 Step 6. Validation 547
- TABLE 45 Step 7. Summary 547
- Enhanced group management 550
- Firmware management 551
- FIGURE 203 Download tab 552
- FIGURE 204 Repository tab 554
- Importing a firmware file 555
- Deleting a firmware file 556
- Switch password management 557
- Resetting the switch password 559
- Frame viewer 560
- Viewing port connectivity 564
- Enabling a port 567
- Disabling a port 567
- Filtering port connectivity 567
- Resetting the filter 568
- Viewing port details 569
- Viewing ports 569
- Port types 570
- Showing connected ports 570
- • Connection properties 571
- Determining port status 574
- Viewing port optics 574
- Port commissioning 576
- CIMOM servers 578
- Registering a CIMOM server 578
- F_Port commissioning 584
- Recommissioning an F_Port 585
- E_Port commissioning 586
- Port commissioning by switch 587
- Port commissioning by blade 588
- E-mailing a report 592
- CIMCLI trouble shooting 593
- AD-enabled fabric discovery 595
- Feature AD context 596
- Port Auto Disable 598
- Unblocking ports 604
- Host Port Mapping 605
- Creating a new Host 606
- Renaming an HBA Host 607
- Deleting an HBA Host 607
- Viewing Host properties 607
- Importing HBA-to-Host mapping 608
- • Checks for duplicate HBAs 609
- Removing an HBA from a Host 610
- Exporting Host port mapping 610
- • \root (Linux) 611
- Storage Port Mapping 613
- Creating a storage array 614
- Deleting a storage array 616
- TABLE 55 Import Results 618
- Host Management 621
- Supported adapters 622
- Converged Network Adapters 623
- Fabric Adapters 623
- HCM software 624
- HCM features 625
- Host adapter discovery 626
- VM Manager 626
- Editing a VM Manager 627
- Deleting a VM Manager 627
- ESXi CIM listener ports 628
- Connectivity map 629
- View management 629
- Host port mapping 629
- Adapter software 630
- Driver repository 631
- Boot image repository 632
- Bulk port configuration 635
- Adding a port configuration 637
- Editing a port configuration 639
- Deleting a port configuration 639
- FAWWNs on attached AG ports 643
- Deleting AG port FAWWNs 644
- Role-based access control 645
- Host performance management 646
- Host security authentication 647
- Host fault management 649
- Filtering event notifications 650
- Backup support 651
- Fibre Channel over Ethernet 653
- Enhanced Ethernet features 654
- FCoE protocols supported 655
- FCoE licensing 656
- Saving running configurations 656
- DCB configuration management 657
- Switch policies 658
- DCB configuration 659
- Configuring LLDP 661
- Adding a LAG 664
- FIGURE 234 Add LAG dialog box 665
- Editing a DCB switch 666
- Editing a DCB port 668
- Editing a LAG 669
- Enabling a DCB port or LAG 671
- Deleting a LAG 671
- QoS configuration 672
- Creating a DCB map 673
- Editing a DCB map 674
- Deleting a DCB map 675
- Creating a Traffic Class map 676
- Editing a Traffic Class map 677
- Deleting a Traffic Class map 677
- FCoE provisioning 678
- VLAN classifier configuration 680
- Adding a VLAN classifier rule 681
- • ARP — 0x0808 682
- • IP — 0x8881 682
- • IPv6 — 0x86DD 682
- LLDP-DCBX configuration 684
- Adding an LLDP profile 685
- Editing an LLDP profile 686
- Deleting an LLDP profile 686
- 802.1x authentication 688
- FIGURE 242 802.1x dialog box 689
- Deploy to Products dialog box 691
- Deploy to Ports dialog box 691
- DCB performance 695
- Historical performance graph 697
- Historical performance report 697
- FCoE login groups 698
- Adding an FCoE login group 699
- Editing an FCoE login group 700
- Viewing virtual FCoE ports 702
- Clearing a stale entry 704
- Security Management 705
- Device_Name 706
- Port_Number 711
- • Save to running 717
- • Save to running and startup 717
- Virtual Fabrics overview 728
- Virtual Fabrics terms 728
- Virtual Fabrics requirements 729
- Configuring Virtual Fabrics 732
- Enabling Virtual Fabrics 733
- Disabling Virtual Fabrics 734
- Deleting a logical switch 739
- SAN Encryption Configuration 745
- Encryption Center features 746
- Encryption user privileges 747
- Smart card usage 748
- Using system cards 753
- Deregistering system cards 755
- Using smart cards 755
- Tracking smart cards 755
- Editing smart cards 758
- Network connections 759
- Blade processor links 759
- (KAC) certificate 760
- Configuration parameters 762
- Key vault type and vendor 763
- Establishing the trusted link 771
- Data Encryption Keys 774
- <primary 784
- - HTTPS Port 433 787
- - SSH Port 22 787
- - Enable SSH 787
- - KM Server Port 9000 787
- - Enable KM Server 787
- Creating a client on TEKA 788
- KAC_Certificate_Name.der 792
- Setting FIPS compliance 796
- Creating a local CA 797
- Creating a server certificate 798
- -----BEGIN CERTIFICATE 801
- Creating a cluster 803
- Backing up the certificates 809
- Configuring the KMIP server 811
- Adding a node to the cluster 812
- Encryption preparation 815
- • Key Vault Type: 819
- (LKM/SSKM) 826
- (ESKM/SKM) 832
- Protocol 846
- --initnode command 852
- --set -keyvault command 852
- --reg keyvault command 853
- Error Instructions dialog box 858
- High availability clusters 860
- Creating HA clusters 861
- Failback option 863
- Invoking failback 863
- Adding an encryption target 864
- 4. Click Next 865
- FIGURE 375 Next Steps screen 871
- Configuring storage arrays 879
- Remote replication LUNs 879
- SRDF pairs 880
- Moving targets 884
- Tape LUN statistics 887
- Encryption engine rebalancing 892
- Master keys 893
- Active master key 894
- Alternate master key 894
- Master key actions 894
- Creating a new master key 901
- Security settings 902
- Setting zeroization 903
- Redirection zones 904
- Disk device decommissioning 905
- Decommissioning disk LUNs 906
- Displaying Universal IDs 908
- Setting disk LUN Re-key All 909
- Thin provisioned LUNs 913
- General tab 921
- Members tab 925
- Members tab Remove button 926
- Security tab 927
- HA Clusters tab 929
- Link Keys tab 931
- Tape Pools tab 932
- Tape pools overview 933
- Adding tape pools 933
- Engine Operations tab 935
- TABLE 68 Encryption acronyms 936
- Zoning overview 937
- Red Zone 938
- Green Zone 938
- Blue Zone 938
- Online zoning 939
- Offline zoning 939
- Zone database size 940
- Zoning configuration 941
- Viewing zone properties 942
- Adding members to a zone 943
- Creating a member in a zone 944
- Removing a member from a zone 945
- Renaming a zone 945
- Deleting a zone 946
- Duplicating a zone 946
- Creating a zone alias 948
- Editing a zone alias 949
- Exporting zone aliases 950
- Renaming a zone alias 950
- Deleting a zone alias 950
- Duplicating a zone alias 951
- Creating a zone configuration 951
- Renaming a zone configuration 955
- Deleting a zone configuration 955
- Refreshing a zone database 958
- Merging fabrics 958
- Merging two zone databases 959
- LSAN zones 963
- Creating an LSAN zone 964
- LSAN tagging 967
- Traffic Isolation zones 968
- Boot LUN zones 973
- Modifying a Boot LUN zone 974
- Zoning administration 975
- Listing zone members 980
- Listing un-zoned members 981
- Removing an offline device 981
- Replacing zone members 982
- Fibre Channel over IP 985
- FCIP services licensing 986
- FCIP Concepts 986
- IP network considerations 986
- TABLE 70 FCIP capabilities 987
- FCIP trunking 988
- Circuit Failover Grouping 991
- Adaptive Rate Limiting 994
- Configuring QoS Priorities 995
- Term Definition 997
- QOS, DSCP, and VLANs 998
- DSCP quality of service 999
- Open systems tape pipelining 1000
- FICON emulation features 1001
- Tape write pipelining 1002
- Tape read pipelining 1002
- Teradata pipelining 1002
- 53-1003154-01 1003
- Planning the configuration 1004
- When to enable Fast Write 1007
- Compression mode 1008
- SRDF considerations 1008
- FCIP configuration guidelines 1009
- Configuring an FCIP tunnel 1010
- Adding an FCIP circuit 1014
- Circuit configuration failure 1018
- Enabling Tperf test mode 1019
- Configuring QoS percentages 1020
- Configuring FICON emulation 1021
- Viewing FCIP port properties 1026
- Editing FCIP circuits 1028
- Disabling FCIP tunnels 1029
- Enabling FCIP tunnels 1029
- Deleting FCIP tunnels 1030
- Disabling FCIP circuits 1030
- Enabling FCIP circuits 1030
- Deleting FCIP Circuits 1030
- (Figure 448) 1034
- Fabric Binding 1037
- Enabling fabric binding 1039
- Disabling fabric binding 1040
- Port Fencing 1045
- Thresholds 1048
- C3 Discard Frames threshold 1049
- Invalid CRCs threshold 1050
- Invalid words threshold 1050
- Link Reset threshold 1050
- Protocol error threshold 1050
- State Change threshold 1050
- Adding thresholds 1051
- Adding a Link Reset threshold 1055
- Assigning thresholds 1059
- Unblocking a port 1060
- Editing thresholds 1061
- Finding assigned thresholds 1065
- Viewing thresholds 1065
- Removing thresholds 1066
- FICON Environments 1069
- Configuring the switch 1072
- • “Enabling Virtual Fabrics” 1075
- Configuring FICON display 1077
- Changing window arrangement 1084
- Clearing port names 1084
- Cascaded FICON fabric 1085
- Enabling DLS 1087
- Cascaded FICON fabric merge 1088
- Resolving merge conflicts 1092
- Port groups 1093
- Viewing port groups 1095
- Editing a port group 1095
- Swapping blades 1096
- Deployment Manager 1099
- Deploying a configuration 1101
- Viewing deployment logs 1102
- In this chapter 1105
- FC troubleshooting 1105
- Tracing FC routes 1106
- Adding a detached device 1109
- Port diagnostics requirements 1110
- • Link traffic 1111
- • Latency measurement 1111
- • Measure link distance 1111
- FCIP troubleshooting 1114
- TABLE 82 IP Ping Details 1115
- Tracing IP routes 1116
- TABLE 83 IP Trace Details 1117
- Field/Component Description 1118
- Performance Data 1119
- SAN performance measures 1120
- Example of SNMP v1 1122
- SAN performance overview 1123
- Example of showing FCIP-MIB 1125
- Example of enabling FCIP-MIB 1125
- Example for FC ports 1126
- Example for FCIP tunnels 1126
- Graph display 1129
- Clearing port counters 1130
- • 5 minutes for last 8 days 1134
- Configuring the graph display 1135
- Filtering data by ports 1136
- Filtering data by time 1136
- Performance database views 1139
- TABLE 85 Performance counters 1141
- SAN end-to-end monitoring 1142
- SAN Top Talker monitoring 1147
- Pausing a Top Talker monitor 1151
- Bottleneck detection 1152
- How bottlenecks are reported 1153
- Example 1159
- FIGURE 484 Threshold example 1160
- Assigning a threshold policy 1163
- SAN connection utilization 1164
- • Press CTRL + U 1165
- Configuring graph options 1168
- FIGURE 492 1170
- FIGURE 493 1170
- Mouse functions for graphs 1174
- Flow Vision 1177
- Supported port types 1178
- Flow Vision terminology 1178
- Flow Vision features 1179
- Flow Vision flows 1180
- Flow definitions 1181
- Supported flow parameters 1183
- Number of supported flows 1183
- Learned flows 1184
- Monitoring flows 1185
- Resetting flow statistics 1188
- Activating flows 1188
- Deactivating flows 1189
- Deleting flows 1189
- Flow Monitor 1190
- Flow Monitor limitations 1191
- Configuring a learned flow 1207
- • Feature — Monitor 1208
- • Direction — Bidirectional 1208
- FIGURE 507 FC router fabric 1218
- Flow Generator 1229
- Flow Generator limitations 1230
- SIM-Ports 1231
- Enabling SIM-Port mode 1232
- Disabling SIM-Port mode 1233
- Column Information Displayed 1239
- Flow Mirror 1241
- FIGURE 513 Mirror flow 1242
- Flow Mirror limitations 1243
- • CPU Mirroring 1244
- • Local Flow Mirror 1244
- Monitoring a Flow Mirror flow 1246
- Tracking SCSI commands 1252
- • Static Flow 1256
- • Aggregated Flow 1256
- • Frame TYpe Monitoring 1256
- • LUN Monitoring 1256
- FIGURE 517 Sample Add Flow 1258
- Replacing Top Talker monitors 1273
- Replacing End-to-End monitors 1273
- Frame Monitor 1275
- Pre-defined frame types 1276
- Custom frame types 1276
- Frame Monitoring requirements 1277
- Editing a frame monitor 1279
- Policy Monitor 1283
- Fabric policy monitors 1284
- Icon Description 1290
- Policy_Name 1301
- Name — Product name 1304
- Fault Management 1307
- Event notification 1308
- ATTENTION 1309
- Defining filters 1310
- SNMP traps 1313
- SNMP trap forwarding 1315
- Adding a trap destination 1316
- Adding a new trap filter 1317
- Event reception 1319
- Adding an SNMP v3 credential 1321
- Trap customization 1324
- • Information about the trap 1325
- SNMP informs 1326
- Adding a syslog recipient 1327
- Removing a syslog recipient 1328
- Syslog forwarding 1329
- Adding a syslog filter 1330
- Event action definitions 1332
- Configuring varbind filters 1335
- Editing event actions 1340
- Special events handling 1341
- Acknowledging special events 1342
- Pseudo events 1347
- Setting pseudo event policies 1348
- Filtering pseudo event traps 1349
- Event custom reports 1358
- Defining report settings 1359
- Defining the report identity 1360
- Editing a report definition 1365
- Event custom report schedules 1366
- Event logs 1369
- Copying part of a log entry 1370
- Copying an entire log entry 1370
- Exporting the entire log 1370
- TABLE 107 Event Properties 1372
- Copying the entire Master Log 1373
- Exporting the Master Log 1374
- The “unnamed” filter 1376
- The “none” filter 1376
- Editing a filter 1376
- Duplicating a filter 1376
- Deleting a filter 1376
- Notes on filters 1377
- Supported hardware 1380
- MAPS license requirements 1380
- Enabling MAPS on a device 1381
- Virtual Fabrics 1382
- High availability 1382
- Admin Domains 1382
- Fabric Watch 1382
- MAPS structural elements 1387
- MAPS monitoring categories 1389
- • The port has gone offline 1390
- • The port has come online 1390
- • The port is faulty 1390
- Fabric monitoring category 1391
- Fabric measures (Continued) 1392
- FRU monitoring category 1393
- Security monitoring category 1393
- Resource monitoring category 1394
- FCIP monitoring category 1394
- TABLE 118 Traffic measures 1395
- MAPS policies 1396
- User-defined policies 1397
- Fabric Watch legacy policies 1397
- MAPS rules 1398
- MAPS conditions 1398
- MAPS actions 1399
- SNMP MIB support 1401
- Viewing MAPS policy data 1403
- Configuring a MAPS policy 1405
- Editing a MAPS policy 1408
- Cloning a MAPS policy 1408
- Importing Flow definitions 1409
- Removing imported Flows 1410
- Activating a MAPS policy 1411
- Exporting a MAPS policy 1412
- Importing a MAPS policy 1412
- Deleting a MAPS policy 1413
- Viewing MAPS policy rules 1413
- Comparing MAPS policies 1415
- MAPS groups 1417
- User-defined groups 1418
- Configuring a group 1418
- Editing a group 1421
- Deleting a group 1422
- Fabric/Device_Name 1423
- Creating multiple groups 1424
- Editing multiple groups 1425
- MAPS violations 1426
- MAPS events 1428
- Event field Description 1430
- Dashboard MAPS widgets 1431
- Master Log 1431
- Technical Support 1433
- Device technical support 1437
- Field Description 1440
- Upload failure data capture 1444
- Reports overview 1449
- SAN report types 1450
- Generating SAN reports 1450
- Viewing SAN reports 1451
- Fabric Summary Report 1452
- Fabric Ports Report 1454
- Exporting SAN reports 1456
- Printing SAN reports 1456
- Deleting SAN reports 1457
- Generating SAN zoning reports 1459
- Host adapter reports 1459
- Adapters Inventory report 1460
- Adapters Faulty SFP report 1461
- Application menus 1463
- SAN main menus 1464
- SAN shortcut menus 1474
- Call Home Event Tables 1491
- TABLE 128 # Thermal Events 1492
- TABLE 129 Fabric OS Events 1492
- Fabric OS Events (Continued) 1493
- Event Categories 1495
- Product audit events 1496
- Security events 1497
- User action events 1498
- Management server events 1498
- Product events 1499
- RASLog Events 1499
- User Privileges 1503
- About user privileges 1504
- • Fabric Ports 1509
- • Fabric Summary 1509
- Information Model 1518
- Object Manager 1518
- About Roles and Access Levels 1521
- Device Properties 1525
- Viewing SAN device properties 1526
- Device properties (Continued) 1528
- • FC Ports 1529
- • GigE Ports 1529
- • IP Ports 1529
- • iSCSI Ports 1529
- • Virtual Sessions Ports 1529
- Viewing storage properties 1530
- Viewing iSCSI properties 1532
- TABLE 139 iSCSI Properties 1533
- Viewing port properties 1534
- TABLE 140 Port properties 1535
- • Authentication Algorithm 1536
- • Encryption Algorithm 1536
- • Diffie-Hellman 1536
- • SA Life 1536
- Port properties (Continued) 1537
- • IP Ping 1538
- • IP Traceroute 1538
- • IP Performance 1538
- Viewing VC module properties 1539
- TABLE 141 Properties tab 1540
- TABLE 142 Port tab 1540
- TABLE 143 NPIV WWNs tab 1540
- Host properties 1541
- Properties customization 1544
- Editing a property field 1545
- Deleting a property field 1545
- Regular Expressions 1547
- TABLE 2 Character classes 1548
- TABLE 1 Characters 1548
- TABLE 7 Boundary matches 1549
- TABLE 8 Greedy quantifiers 1550
- TABLE 9 Reluctant quantifiers 1550
- TABLE 11 Logical operators 1550
- TABLE 12 Back references 1551
- Troubleshooting 1553
- Browser troubleshooting 1554
- Discovery troubleshooting 1556
- FICON troubleshooting 1556
- Launch Client troubleshooting 1558
- Names troubleshooting 1560
- Patch troubleshooting 1560
- Performance troubleshooting 1561
- Port Fencing troubleshooting 1565
- Server troubleshooting 1565
- Supportsave troubleshooting 1567
- View All list troubleshooting 1568
- Wireless troubleshooting 1569
- Zoning troubleshooting 1569
- Database Fields 1571
- TABLE 19 ACH_EVENT_FILTER_MAP 1572
- TABLE 20 ACH_FILTER 1572
- TABLE 21 ACH_INFO 1572
- TABLE 22 AD_GROUP 1572
- TABLE 26 AOR_DEVICE_GROUP_MAP 1573
- TABLE 34 BIRTREPORT_PARAMETER 1575
- • 1 indicates PDF 1576
- • 2 indicates CSV 1576
- Database tables and fields 1577
- BIRTREPORT_SCHEDULE_PARAMETER 1577
- BIRTREPORT_SCHEDULE_TEMPLATE 1577
- BIRTTEMPLATE_PARAMETER 1577
- BOOT_IMAGE_DRIVER_MAP 1577
- TABLE 42 BOOT_LUN_SEQUENCE 1578
- TABLE 44 CAPABILITY_ 1578
- TABLE 45 CARD 1578
- TABLE 45 CARD (Continued) 1579
- • 0 - 1G 1580
- • 1 - 10G 1580
- • 2 - Dual mode 1580
- • 3 - Failover mode 1580
- TABLE 50 CEE_PORT 1581
- TABLE 51 CFG_BACKUP_ARCHIVE 1581
- TABLE 52 CHANGELOG 1582
- TABLE 53 CLI_TEMPLATE 1582
- TABLE 54 CLIENT_VIEW 1583
- TABLE 55 CLIENT_VIEW_COLUMN 1584
- TABLE 56 CLIENT_VIEW_MEMBER 1584
- TABLE 58 CLUSTER 1584
- TABLE 59 CLUSTER_MEMBER 1584
- TABLE 60 CNA_ETH_PORT 1585
- TABLE 62 CNA_ETH_PORT_CONFIG 1585
- TABLE 63 CNA_PORT 1586
- TABLE 64 COLLECTOR 1586
- TABLE 68 CONFIG_BLOCK 1587
- TABLE 69 CONFIG_CONDITION 1588
- TABLE 70 CORE_SWITCH 1588
- CORE_SWITCH (Continued) 1589
- TABLE 72 CORE_SWITCH_CHECKSUM 1590
- TABLE 74 CORE_SWITCH_DETAILS 1590
- • 1 is supported 1591
- • 0 is not supported 1591
- TABLE 75 CRYPTO_HOST 1592
- TABLE 76 CRYPTO_LUN 1593
- CRYPTO_LUN (Continued) 1594
- TABLE 77 CRYPTO_SWITCH 1595
- CRYPTO_TARGET_CONTAINER 1596
- CRYPTO_SWITCH (Continued) 1596
- TABLE 80 DASHBOARD 1597
- TABLE 81 DASHBOARD_CANVAS 1598
- TABLE 83 DASHBOARD_PROVIDER 1598
- TABLE 84 DASHBOARD_WIDGET 1599
- TABLE 86 DEFAULT_FAVORITES 1600
- DEFAULT_WIDGET_PREFERENCE 1601
- DEPLOYMENT_CONFIGURATION 1601
- DEFAULT_FAVORITES (Continued) 1601
- • 1-Presnapshot 1602
- • 2-Postsnapshot 1602
- • 3-Pre & Post snapshot 1602
- TABLE 92 DEPLOYMENT_STATUS 1603
- TABLE 94 DEVICE 1604
- TABLE 94 DEVICE (Continued) 1605
- TABLE 95 DEVICE_CONNECTION 1610
- TABLE 96 DEVICE_ENCLOSURE 1611
- DEVICE_ENCLOSURE_MEMBER 1612
- DEVICE_ENCLOSURE (Continued) 1612
- TABLE 98 DEVICE_FDMI_DETAILS 1613
- TABLE 99 DEVICE_GROUP 1613
- TABLE 100 DEVICE_GROUP_ENTRY 1614
- TABLE 101 DEVICE_GROUP 1614
- TABLE 103 DEVICE_NODE 1614
- TABLE 104 DEVICE_PORT 1615
- TABLE 107 DISK_USAGE 1617
- TABLE 108 ENCRYPTION_ENGINE 1617
- ENCRYPTION_ENGINE (Continued) 1618
- TABLE 109 ENCRYPTION_GROUP 1619
- ENCRYPTION_GROUP (Continued) 1620
- ENCRYPTION_GROUP_MEMBER 1621
- ENCRYPTION_KMIP_PARAMETERS 1621
- ENCRYPTION_TAPE_POOL 1621
- TABLE 113 ETHERNET_CLOUD 1622
- TABLE 114 ETHERNET_ISL 1622
- TABLE 115 EVENT 1622
- TABLE 115 EVENT (Continued) 1623
- TABLE 116 EVENT_CALL_HOME 1624
- TABLE 117 EVENT_CATEGORY 1624
- TABLE 118 EVENT_DESCRIPTION 1624
- TABLE 119 EVENT_DETAILS 1624
- TABLE 120 EVENT_FWD_FILTER 1625
- TABLE 121 EVENT_INSTANCE 1625
- TABLE 122 EVENT_MODULE 1626
- TABLE 123 EVENT_NOTIFICATION 1626
- TABLE 124 EVENT_ORIGIN 1627
- TABLE 125 EVENT_POLICY 1627
- TABLE 127 EVENT_PROCESSOR_MAP 1628
- TABLE 128 EVENT_RULE 1629
- TABLE 129 EVENT_RULE_ACTION 1629
- TABLE 130 FABRIC 1630
- TABLE 130 FABRIC (Continued) 1631
- TABLE 131 FABRIC_CHECKSUM 1632
- TABLE 132 FABRIC_COLLECTION 1632
- TABLE 135 FABRIC_MEMBER 1633
- TABLE 139 FAVORITES 1634
- TABLE 142 FCIP_TUNNEL 1635
- FCIP_TUNNEL (Continued) 1636
- FCIP_TUNNEL_CIRCUIT 1638
- FCIP_TUNNEL_PERFORMANCE 1641
- TABLE 145 FCOE_DEVICE 1642
- TABLE 146 FCR_ROUTE 1642
- TABLE 147 FEATURE 1642
- TABLE 148 FEATURE_EDITION_MAP 1642
- TABLE 149 FEATURES_USAGE 1642
- TABLE 150 FICON_DEVICE_PORT 1643
- TABLE 153 FOUNDRY_DEVICE 1644
- TABLE 154 FOUNDRY_MODULE 1644
- TABLE 157 FPORT_TRUNK_GROUP 1645
- TABLE 158 FPORT_TRUNK_MEMBER 1645
- TABLE 159 FRU 1646
- TABLE 160 FTP_SERVER 1647
- TABLE 161 GENERATED_REPORT 1647
- TABLE 159 FRU (Continued) 1647
- TABLE 162 GIGE_PORT 1648
- TABLE 164 GIGE_PORT_STATS 1649
- TABLE 165 GLOBAL_VLAN 1649
- TABLE 167 HA_CLUSTER 1650
- TABLE 168 HBA 1650
- TABLE 168 HBA (Continued) 1651
- • HBA/CNA/AnyIO/Mezzanine 1652
- • 0 - Unknow 1653
- • 1 - Yes 1653
- • 2 - No 1653
- TABLE 171 HBA_PORT_DETAIL 1654
- HBA_PORT_DETAIL (Continued) 1655
- HBA_PORT_DEVICE_PORT_MAP 1656
- HBA_PORT_FCOE_DETAILS 1656
- TABLE 174 HBA_REMOTE_PORT 1658
- HBA_REMOTE_PORT_LUN 1659
- HBA_REMOTE_PORT (Continued) 1659
- TABLE 176 HBA_TARGET 1660
- TABLE 177 HEALTH_STATUS 1660
- HOST_DISCOVERY_OPTIONS 1661
- HOST_DISCOVERY_REQ_GROUP 1662
- HOST_DISCOVERY_REQUEST 1662
- HOST_DISCOVERY_REQUESTS 1663
- HYPER_V_VIRTUAL_MACHINE 1663
- TABLE 186 IFL 1664
- TABLE 187 IFL_CONNECTION 1664
- TABLE 188 INTERFACE 1665
- TABLE 190 IP_DEVICE_LICENSE 1666
- TABLE 191 IP_INTERFACE 1667
- TABLE 192 IP_PORT_GROUP 1667
- TABLE 193 IP_ROUTE 1667
- TABLE 194 IP_SUBNET_VLAN 1668
- TABLE 195 IPX_NETWORK_VLAN 1668
- TABLE 196 ISL 1668
- • 0 denotes untrusted 1669
- • 1 denotes trusted 1669
- • 0 denotes present 1669
- TABLE 198 ISL_TRUNK_GROUP 1670
- TABLE 197 ISL_CONNECTION 1670
- TABLE 199 ISL_TRUNK_MEMBER 1671
- TABLE 200 KEY_VAULT 1671
- • 0 = Standard 1672
- • 1= Extended 1672
- • 1 = Clear stats is enabled 1672
- TABLE 205 L2_NEIGHBOR 1673
- TABLE 208 LAG 1674
- TABLE 209 LAG_MEMBER 1675
- TABLE 208 LAG (Continued) 1675
- TABLE 212 LICENSE 1676
- TABLE 214 LICENSE_FEATURE_MAP 1677
- TABLE 215 LICENSE_RULE 1677
- TABLE 216 LICENSED_FEATURE 1677
- TABLE 217 LINK 1678
- TABLE 218 LOCK 1678
- TABLE 219 LSAN_DEVICE 1678
- TABLE 220 LSAN_TAG_CONFIG 1678
- TABLE 221 LSAN_PROXY_DEVICE 1679
- TABLE 222 LSAN_ZONE 1679
- TABLE 223 LSAN_ZONE_DB_CONFIG 1679
- TABLE 224 LSAN_ZONE_MEMBER 1679
- TABLE 225 MCT_CLIENT 1679
- • Deployed(0) 1680
- • Undeployed(1) 1680
- TABLE 229 MAC_GROUP 1681
- TABLE 230 MAC_GROUP_MEMBER 1681
- TABLE 231 MANAGED_ELEMENT 1681
- TABLE 232 MAPS_EVENT 1682
- TABLE 233 MAPS_EVENT_DETAILS 1682
- TABLE 235 MAPS_POLICY 1683
- TABLE 236 MARCHING_ANTS 1683
- TABLE 237 MEASURE 1683
- TABLE 238 MESSAGE_RECIPIENT 1684
- TABLE 239 MIGRATION_HISTORY 1684
- TABLE 237 MEASURE (Continued) 1684
- TABLE 240 MODULE 1685
- TABLE 241 MODULE_SLOT_PRESENT 1686
- TABLE 242 MPLS_ADMIN_GROUP 1686
- TABLE 240 MODULE (Continued) 1686
- TABLE 244 MPLS_LSP 1687
- TABLE 245 MPLS_PATH 1687
- TABLE 246 MPLS_PATH_HOP 1687
- TABLE 247 MPLS_RSVP_LSP 1688
- MPLS_RSVP_LSP_ADMIN_GROUP 1689
- MPLS_RSVP_LSP_FRR_PARAMETERS 1689
- TABLE 253 MPLS_RSVP_LSP_PATH 1690
- TABLE 255 MPLS_SERVICE 1691
- MPLS_SERVICE_PEER_RELATION 1692
- TABLE 259 MRP_RING 1693
- TABLE 260 MRP_RING_DEVICE 1693
- TABLE 261 N2F_PORT_MAP 1694
- TABLE 262 NETWORK_VLAN 1694
- TABLE 263 NETWORK_SCOPE_TYPE 1695
- TABLE 264 NIC_PROFILE 1695
- TABLE 265 NPORT_WWN_MAP 1695
- TABLE 266 NP_FLOW_DEFINITION 1695
- TABLE 267 NP_SUB_FLOW 1696
- TABLE 269 OUI_VENDOR 1697
- • device level collector is 0 1698
- • port level collector is 1 1698
- TABLE 273 PBR_NEXT_HOP 1699
- TABLE 274 PBR_POLICY 1699
- TABLE 275 PBR_RULE 1699
- TABLE 276 PBR_RULE_ACL_LIST 1699
- TABLE 277 PHANTOM_PORT 1700
- TABLE 278 PHYSICAL_DEVICE 1700
- TABLE 279 PHYSICAL_INTERFACE 1701
- TABLE 280 PHYSICAL_PORT 1702
- TABLE 284 PM_DASHBOARD_WIDGET 1703
- TABLE 285 PM_DATA_COLLECTOR 1704
- TABLE 286 PM_MEASURE 1705
- • 0 = product level 1707
- • 1 = port level 1707
- • 0 = disabled 1707
- • 1 = enabled 1707
- TABLE 296 POE_THRESHOLD_EVENT 1708
- TABLE 297 POLICY_RULE 1708
- TABLE 298 POLICY_RULE_MAP 1708
- PORT_BOTTLENECK_CONFIG 1709
- PORT_BOTTLENECK_STATUS 1709
- PORT_COMMISSION_CIMOM_SERVER 1709
- TABLE 302 PORT_FENCING_POLICY 1710
- TABLE 304 PORT_PROFILE 1711
- TABLE 305 PORT_PROFILE_DOMAIN 1711
- PORT_PROFILE_QOS_PFC_MAP 1713
- PORT_PROFILE_VLAN_MAP 1713
- PORT_PROFILE_QOS_MAP 1713
- • 0 = Disabled 1714
- • 1 = Enabled 1714
- TABLE 313 PRIVILEGE 1715
- TABLE 314 PRODUCT_APP 1715
- TABLE 315 PROTOCOL_VLAN 1716
- TABLE 316 QRTZ_BLOB_TRIGGERS 1716
- TABLE 317 QRTZ_CALENDARS 1716
- TABLE 318 QRTZ_CRON_TRIGGERS 1716
- TABLE 319 QRTZ_FIRED_TRIGGERS 1716
- TABLE 320 QRTZ_JOB_DETAILS 1717
- TABLE 321 QRTZ_JOB_LISTENERS 1717
- TABLE 322 QRTZ_LOCKS 1717
- QRTZ_PAUSED_TRIGGER_GRPS 1718
- QRTZ_SCHEDULER_STATE 1718
- QRTZ_SIMPLE_TRIGGERS 1718
- QRTZ_SIMPROP_TRIGGERS 1718
- TABLE 328 QRTZ_TRIGGERS 1719
- TABLE 331 RAS_LOG 1720
- TABLE 332 RECIPIENT_TYPE 1720
- TABLE 334 REPORT_TYPE 1720
- TABLE 335 REPORT_TEMPLATE 1721
- • 0= Not Hidden 1722
- • 1= Hidden 1722
- TABLE 344 RULE_CONDITION_MAP 1723
- TABLE 346 SAN 1723
- TABLE 347 SAN_CONNECTION 1723
- TABLE 348 SCOM_HOST 1724
- TABLE 349 SECURITY_POLICY 1724
- TABLE 351 SENSOR 1725
- TABLE 352 SFLOW_CHECKPOINT 1726
- TABLE 353 SFLOW_HOUR_SUMMARY 1726
- TABLE 351 SENSOR (Continued) 1726
- • 0 means its edge port 1728
- • 1 means its trill port 1728
- TABLE 358 SFLOW_MINUTE_MAC 1729
- TABLE 361 SFLOW_MINUTE_VLAN 1730
- • 1 means its fabric port 1731
- SFLOW_STAGING (Continued) 1732
- TABLE 366 SFLOW_STAGING_SLNUM 1733
- TABLE 367 SMART_CARD 1733
- • 1-Pre snapshot 1734
- • 2-Post snapshot 1734
- TABLE 371 SNMP_DATA 1735
- TABLE 372 SNMP_DATA_1DAY 1736
- TABLE 373 SNMP_DATA_2HOUR 1736
- TABLE 374 SNMP_DATA_30MIN 1737
- TABLE 375 SNMP_EXPR_DATA 1737
- TABLE 378 SNMP_EXPRESSION 1738
- TABLE 379 SNMP_PROFILE 1738
- SNMP_PROFILE (Continued) 1739
- TABLE 383 SSL_CERTIFICATE 1740
- TABLE 385 SSL_KEY 1741
- TABLE 386 SSL_KEY_PASSWORD 1742
- TABLE 387 STATS_AGING 1742
- TABLE 388 STP_PORT 1742
- TABLE 385 SSL_KEY (Continued) 1742
- TABLE 389 STP_INSTANCE 1743
- • 0 - Disabled 1744
- • 1 - Enabled 1744
- • CEE_RUNNING=1 1745
- • CEE_STARTUP=2 1745
- • INVALID=-1 1745
- TABLE 393 SWITCH_LICENSE 1746
- TABLE 394 SWITCH_MODEL 1746
- TABLE 395 SWITCH_PORT 1747
- SWITCH_PORT (Continued) 1748
- SWITCH_PORT_PERFORMANCE 1751
- TABLE 399 SYSTEM_PROPERTY 1752
- TABLE 400 TARGET_TYPE 1753
- TABLE 401 THIRD_PARTY_DEVICE 1753
- TABLE 402 THRESHOLD_MEASURE 1753
- TABLE 403 THRESHOLD_POLICY 1753
- TABLE 404 TIME_SERIES_DATA 1753
- TIME_SERIES_DATA_1DAY 1754
- TIME_SERIES_DATA_2HOUR 1754
- TIME_SERIES_DATA (Continued) 1754
- TABLE 408 TIME_SERIES_DATA_1 1755
- TIME_SERIES_DATA_1_1DAY 1756
- TIME_SERIES_DATA_1_2HOUR 1756
- TABLE 412 TIME_SERIES_DATA_2 1757
- TIME_SERIES_DATA_2_1DAY 1758
- TIME_SERIES_DATA_2_2HOUR 1759
- TIME_SERIES_DATA_2_30MIN 1759
- TABLE 416 TIME_SERIES_DATA_3 1760
- TIME_SERIES_DATA_3_2HOUR 1761
- TIME_SERIES_DATA_3_30MIN 1761
- TABLE 420 TIME_SERIES_DATA_4 1762
- TIME_SERIES_DATA_4_1DAY 1763
- TIME_SERIES_DATA_4_2HOUR 1763
- TABLE 424 TIME_SERIES_DATA_5 1764
- TIME_SERIES_DATA_5_30MIN 1765
- TABLE 426 TOOL_APP 1766
- TABLE 427 TOOL_PATH 1766
- TABLE 428 TOPO_MAP_IMAGE 1766
- TABLE 429 TRILL 1766
- TABLE 430 TRILL_TRUNK_GROUP 1767
- TABLE 431 TRILL_TRUNK_MEMBER 1767
- TABLE 433 TRUNK_GROUP_MEMBER 1767
- • 0=Disabled 1768
- • 1=Enabled 1768
- USER_DEFINED_DEVICE_DETAIL 1769
- USERDEFINED_NETWORK_SCOPE 1769
- TABLE 439 USER_PREFERENCE 1770
- TABLE 442 USER_RESOURCE_MAP 1770
- TABLE 443 USER_ROLE_MAP 1770
- TABLE 444 USER_STATE_MAP 1771
- TABLE 445 V_PORT_DETAIL 1771
- TABLE 446 VCN_ICL 1771
- TABLE 447 VCN_MEMBER 1771
- • Disabled(0) 1772
- • Enabled(1) 1772
- TABLE 450 VCEM_PROFILE 1773
- TABLE 451 VIP_SERVER 1773
- TABLE 452 VIP_SERVER_BINDING 1774
- TABLE 454 VIRTUAL_FCOE_PORT 1774
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1775
- VIRTUAL_FCOE_PORT_STAT 1775
- VIRTUAL_FCOE_PORT (Continued) 1775
- • 1-Enabled 1776
- • 0-disabled 1776
- VIRTUAL_SWITCH (Continued) 1777
- TABLE 472 VMOTION_EVENT 1783
- TABLE 474 VM_DATA_CENTER 1784
- TABLE 476 VM_DV_PORT 1785
- TABLE 477 VM_DV_PORT_GROUP 1786
- TABLE 478 VM_DV_SWITCH 1787
- TABLE 480 VM_FC_HBA 1788
- • Fabric 1789
- • Point to point 1789
- • Unknown 1789
- VM_HOST_END_DEV_CONNECTIVITY 1790
- VM_HOST_PROXY_SWITCH 1790
- VM_HOST (Continued) 1790
- TABLE 486 VM_HOST_VIRTUAL_NIC 1791
- TABLE 487 VM_NETWORK_SETTINGS 1792
- TABLE 489 VM_PATH 1793
- TABLE 490 VM_PHYSICAL_NIC 1794
- TABLE 489 VM_PATH (Continued) 1794
- TABLE 491 VM_SECURITY_POLICY 1795
- • VMKernel 1796
- • Service Console 1796
- TABLE 495 VM_STORAGE 1797
- TABLE 498 VM_VCENTER 1798
- TABLE 499 VM_VCENTER_MEMBER 1799
- TABLE 501 VM_VIRTUAL_MACHINE 1801
- VPLS_DEVICE_RELATION 1802
- VPLS_ENDPOINT_RELATION 1802
- TABLE 505 VR_CONN_DOMAIN 1803
- TABLE 508 VR_CONN_MODULE 1804
- TABLE 509 VR_CONN_MODULE_PORT 1804
- TABLE 511 VR_CONN_WWN 1805
- TABLE 514 WT_ARCHIVE 1806
- TABLE 515 ZONE 1806
- TABLE 516 ZONE_ALIAS 1807
- TABLE 517 ZONE_ALIAS_IN_ZONE 1807
- TABLE 518 ZONE_ALIAS_MEMBER 1807
- TABLE 519 ZONE_DB 1807
- TABLE 520 ZONE_DB_CONFIG 1808
- TABLE 521 ZONE_DB_CONTENT 1808
- TABLE 522 ZONE_DB_USERS 1808
- TABLE 523 ZONE_IN-ZONE_SET 1808
- TABLE 524 ZONE_MEMBER 1808
- ADAPTER_PORT_CONFIG_INFO 1809
- AG_CONNECTION_INFO 1809
- BIRTREPORT_SCHEDULE_INFO 1810
- BOOT_IMAGE_FILE_DETAILS_INFO 1811
- CNA_ETH_PORT_CONFIG_INFO 1811
- CNA_PORT_DETAILS_INFO 1812
- CNA_PORT_INFO 1812
- CORE_SWITCH_DETAILS_INFO 1813
- CRYPTO_HOST_LUN_INFO 1814
- CRYPTO_TARGET_ENGINE_INFO 1815
- DASHBOARD_PREFERENCES_INFO 1815
- DEPLOYMENT_INFO 1816
- DEPLOYMENT_LOG 1817
- DEVICE_CONNECTION_INFO 1817
- EE_MONITOR_STATS_5MIN_INFO 1818
- EE_MONITOR_STATS_30MIN_INFO 1818
- EE_MONITOR_STATS_2HOUR_INFO 1818
- EE_MONITOR_STATS_1DAY_INFO 1819
- TE_PORT_STATS_5MIN_INFO 1819
- TE_PORT_STATS_30MIN_INFO 1820
- TE_PORT_STATS_2HOUR_INFO 1820
- TE_PORT_STATS_1DAY_INFO 1820
- SWITCH_INFO 1821
- SWITCH_REPORT_INFO 1823
- DEVICE_INFO 1825
- N2F_PORT_MAP_INFO 1826
- DEVICE_NODE_INFO 1827
- DEVICE_PORT_INFO 1828
- DEVICE_REPORT_INFO 1829
- DEV_PORT_GIGE_PORT_LINK_INFO 1830
- DEV_PORT_MAC_ADDR_MAP_INFO 1830
- ISL_CONNECTION_INFO 1831
- ISL_INFO 1831
- ETHERNET_ISL_INFO 1832
- EVENT_DETAILS_INFO 1833
- EVENT_INFO 1834
- FABRIC_INFO 1835
- FCIP_TUNNEL_CIRCUIT_INFO 1836
- FCIP_TUNNEL_INFO 1837
- FCOE_DEVICE_INFO 1838
- FRU_INFO 1838
- GIGE_PORT_ECLOUD_LINK_INFO 1839
- GIGE_PORT_INFO 1839
- GENERATED_BIRTREPORT_INFO 1840
- HBA_PORT_DETAILS_INFO 1841
- HBA_TARGET_INFO 1843
- HEALTH_STATUS_INFO 1844
- HOST_INVENTORY_REPORT_INFO 1845
- HOST_DISCOVERY_REQUEST_INFO 1848
- HOST_DISCOVERY_REQUESTS_INFO 1849
- IFL_INFO 1851
- IFL_REPORT_INFO 1851
- ISL_REPORT_INFO 1855
- ISL_TRILL_INFO 1857
- ISL_TRUNK_GROUP_MEMBER_INFO 1858
- ISL_TRUNK_INFO 1859
- L2_NEIGHBOR_INFO 1859
- MAPS_EVENT_DETAILS_INFO 1860
- N2F_PORT_MAP_REPORT_INFO 1861
- MODULE_INFO 1864
- NPORT_WWN_MAP_INFO 1866
- PHANTOM_PORT_INFO 1866
- PRODUCT_INFO 1867
- PORT_BOTTLENECK_CONF_INFO 1869
- PORT_BOTTLENECK_STAT_INFO 1869
- PORT_GROUP_INFO 1870
- ROLE_PRIVILEGE_INFO 1870
- PORT_PROFILE_INFO 1871
- PORT_PROFILE_INTERFACE_INFO 1871
- PORT_PROFILE_MAC_INFO 1872
- PORT_VLAN_INFO 1872
- PROTOCOL_VLAN_INFO 1873
- SFLOW_MINUTE_L3_VIEW 1873
- SFLOW_MINUTE_MAC_VIEW 1873
- SCOM_EE_MONITOR_INFO 1874
- SENSOR_INFO 1874
- SMART_CARD_USAGE_INFO 1875
- SWITCH_CONFIG_INFO 1876
- SWITCH_PORT_DETAILS_INFO 1877
- SWITCH_DETAILS_INFO 1882
- SWITCH_DISCOVERED_MAC_INFO 1884
- SWITCH_PORT_INFO 1884
- SWITCH_SNMP_INFO 1886
- TIME_SERIES_DATA_INFO 1888
- TIME_SERIES_DATA_VIEW 1889
- TRILL_INFO 1890
- TRILL_TRUNK_INFO 1891
- USER_ROLE_RESOURCE_INFO 1891
- VIRTUAL_FCOE_PORT_INFO 1892
- VIRTUAL_PORT_WWN_DETAILS_INFO 1892
- VM_ADDRESS_INFO 1893
- VLAN_INT_CLASSIFIER_INFO 1894
- VM_CONNECTIVITY_INFO 1894
- VM_NETWORK_CONNECTIVITY_INFO 1897
- VM_DATASTORE_DETAILS_INFO 1899
- VM_EE_MONITOR_INFO 1899
- VM_HOST_INFO 1900
- VM_LUN_INFO 1901
- VM_STATISTICS_INFO 1901
- VR_CONN_MODULE_INFO 1903
- VR_CONN_MODULE_PORT_INFO 1905
- VR_CONN_NPIV_INFO 1906
- VMM_DISCOVERED_MAC_INFO 1907
- ZONE_DB_INFO 1908
- ZONE_DB_REPORT_INFO 1909
- AP_USAGE 1909
- SFLOW_MINUTE_BGP_VIEW 1909
- SFLOW_MINUTE_VLAN_VIEW 1910
- PHYSICAL_DEVICE_INFO 1910
- SLOT_INFO 1910
- MANAGED_ELEMENT_INFO 1911
- SNMP_DATA_INFO 1911
- SNMP_EXPR_DATA_INFO 1911
- SNMP_DATA_VIEW 1911
- VM_VNETWORK_INFO 1914
- VCS_CLUSTER_MEMBER_INFO 1915
- RESET_VCS_LICENSED 1916
- WIRELESS_INTERFACE 1916
- WIRED_INTERFACE 1917
- CEE_PORT_INFO 1919
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.076 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce