Brocade Network Advisor SAN User Manual v12.3.0 Uživatelský manuál Strana 98
- Strana / 194
- Tabulka s obsahem
- ŘEŠENÍ PROBLÉMŮ
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
46 Brocade Network Advisor SAN User Manual
53-1003154-01
Troubleshooting fabric discovery
3
The Discovery Status field details the actual status message text, which varies depending on
the situation. The following are samples of actual status messages:
• Discovered: Seed Switch: Not registered for SNMP Traps
• Discovered: Seed Switch: Not Manageable: Not registered for SNMP Traps
• Discovered: Current seed switch is not recommended. Change Seed Switch. : Seed Switch:
Not registered for SNMP Traps
• New Discovery Pending
Troubleshooting fabric discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
1. Verify IP connectivity by issuing a ping command to the switch.
a. Open the command prompt.
b. From the Server, type
ping Switch_IP_Address.
2. Enter the IP address of the device in a browser to verify the http reachability.
For example, http://10.1.1.11.
Managed count exceeded troubleshooting
The following section states possible issues and the recommended solution when you exceed your
managed count limits.
- Brocade Network Advisor 1
- Document History 2
- Contents 5
- Chapter 2 Patches 6
- Chapter 3 Discovery 6
- Chapter 6 Web Client 10
- Chapter 8 View Management 12
- Chapter 9 Call Home 13
- Chapter 10 Third-party tools 14
- Chapter 13 Host Port Mapping 17
- Chapter 15 Host Management 18
- Chapter 19 Virtual Fabrics 21
- Chapter 21 Zoning 25
- Chapter 23 Fabric Binding 29
- Chapter 24 Port Fencing 29
- Chapter 25 FICON Environments 30
- Chapter 26 Deployment Manager 30
- Chapter 28 Performance Data 31
- Chapter 29 Flow Vision 32
- Chapter 30 Frame Monitor 33
- Chapter 31 Policy Monitor 33
- Chapter 32 Fault Management 34
- Chapter 34 Technical Support 37
- Chapter 35 Reports 37
- Appendix A Application menus 38
- Appendix C Event Categories 38
- Appendix D User Privileges 38
- Appendix E Device Properties 38
- Appendix G Troubleshooting 39
- Appendix H Database Fields 39
- About This Document 43
- What’s new in this document 48
- Document conventions 49
- Notice to the reader 50
- Additional information 50
- Getting technical help 51
- Document feedback 52
- Getting Started 53
- FIGURE 1 Main window 54
- Management server and client 55
- Launching a remote client 56
- Logging into the web client 57
- • FTP server 58
- • Server IP 58
- • Server Ports 58
- • SMI Agent 58
- Viewing active sessions 62
- Disconnecting users 63
- Viewing server properties 63
- Viewing port status 64
- Server and client ports 65
- Keyboard shortcuts 69
- Look and feel customization 70
- Product improvement 71
- Data transfer 72
- PostgreSQL database 73
- > ./edb_psqlodbc.bin 75
- Feature Fabric OS 81
- Installing a patch 83
- Uninstalling a patch 84
- Discovery 87
- FCS policy and seed switches 88
- Discovering fabrics 89
- Attribute Value 91
- Configuring SNMP credentials 94
- Rediscovering a fabric 96
- Deleting a fabric 97
- • New Discovery Pending 98
- • “Deleting a fabric” 99
- Problem Resolution 100
- SAN Fabric monitoring 101
- SAN Seed switch 105
- Seed switch requirements 106
- Seed switch failover 106
- Changing the seed switch 106
- Host discovery 107
- Importing Hosts from a fabric 112
- • CIM Server unknown failure 117
- • HCM Agent connection failed 117
- Host_IP_Address 118
- VM Manager discovery 119
- Editing a VM manager 121
- • Active 123
- • Failed – Not reachable 123
- • Discovery pending 124
- • Excluded 124
- Application Configuration 125
- Server Data backup 127
- Configuring backup 128
- Enabling backup 130
- Disabling backup 130
- Viewing the backup status 131
- Changing the backup interval 131
- Starting immediate backup 132
- Reviewing backup events 132
- Server Data restore 133
- SAN data collection 134
- SAN display settings 137
- Resetting your display 138
- Importing the OUI file 139
- Editing the product type 139
- SAN End node display 140
- SAN Ethernet loss events 141
- Event storage settings 142
- Flyover settings 143
- Name settings 146
- Fixing duplicate names 148
- Viewing names 149
- Adding a name to a new device 151
- Removing a name from a device 152
- Editing names 152
- Exporting names 152
- Importing Names 153
- Searching for a device by WWN 154
- Configuring the server name 155
- Configuring login security 156
- Syslog Registration settings 157
- Software Configuration 160
- Certificates 161
- Client export port settings 167
- Client/Server IP 168
- • Select All. Go to step 4 169
- Memory allocation settings 172
- Configuring asset polling 174
- TABLE 17 Network size status 175
- Configuring SAN communication 176
- FTP/SCP/SFTP server settings 177
- Server port settings 182
- Support mode settings 183
- FIPS Support 185
- Fabric tracking 185
- Disabling fabric tracking 186
- User Account Management 191
- User accounts 195
- Editing a user account 197
- Copying a user account 197
- Exporting a user account 198
- Importing a user account 199
- Disabling a user account 200
- Enabling a user account 200
- Deleting a user account 201
- Unlocking a user account 201
- Creating a new role 201
- Editing a role 202
- Copying a role 203
- Deleting a role 203
- Adding privileges to a role 203
- Areas of responsibility 205
- Editing an AOR 206
- Copying an AOR 207
- Deleting an AOR 207
- Assigning products to an AOR 207
- Removing products from an AOR 208
- Password policies 209
- User profiles 211
- Viewing your user profile 212
- Editing your user profile 212
- Changing your password 213
- Viewing your password policy 214
- Resetting optional messages 214
- Web Client 217
- Dashboard 218
- Dashboard toolbar 220
- General dashboard functions 220
- Dashboard customization 221
- • All products and fabrics 222
- • Any SAN fabric 222
- Setting the time interval 223
- Default dashboards 224
- Status widgets 225
- Events widget 226
- Host Adapter Inventory widget 227
- SAN Inventory widget 229
- SAN Status widget 231
- Status widget 232
- VM Alarms widget 232
- Port Health Violations widget 235
- Performance monitors 236
- Top Port C3 Discards monitor 239
- Top Port CRC Errors monitor 241
- Top Port Link Resets monitor 244
- Top Port Receive EOF monitor 246
- Top Port Sync Losses monitor 248
- Top Port Traffic monitor 250
- Inventory 262
- Fabric summary view 263
- FIGURE 82 Host Details table 264
- FIGURE 84 Events table 265
- Viewing fabric properties 267
- Product summary view 268
- FIGURE 89 Port Details area 269
- FIGURE 90 Violations table 271
- FIGURE 91 Events table 272
- Viewing product properties 276
- Port summary view 277
- FIGURE 94 Port summary 278
- FIGURE 95 Violations table 280
- FIGURE 97 Events page 283
- Table functions 284
- FIGURE 98 Reports page 285
- Reports toolbar 286
- General report page functions 286
- Generating a report 287
- Generated reports 288
- Viewing generated reports 289
- Report schedules 290
- Configuring a new schedule 291
- E-mailing reports 295
- Editing a schedule 296
- Report templates 297
- Viewing report templates 298
- Viewing a report 298
- Exporting report templates 299
- Importing report templates 299
- Sharing report templates 299
- Default reports 300
- Fabric Summary report 301
- Fabric Ports report 305
- Switch Report 307
- Zone Summary reports 309
- Report content and functions 313
- Dashboard Management 315
- FIGURE 110 Dashboard tab 316
- Dashboard messages 318
- Dashboard Privileges 319
- Accessing a dashboard 320
- Filtering the dashboards list 320
- Setting the dashboard display 323
- Setting the network scope 326
- • Any system-defined group 327
- Setting the time scope 329
- Customizing the time scope 330
- Dashboard playback 331
- Bottleneck Graph dialog box 335
- Monitor types 376
- Measures 376
- - Wireless 378
- • Traffic flows 378
- TABLE 29 Port measures types 383
- Common 392
- Wireless 393
- Traffic flow monitor types 394
- Traffic flow measures 394
- View Management 403
- SAN tab overview 404
- SAN main toolbar 405
- View All list 406
- Port Display buttons 407
- Connectivity Map toolbar 407
- Product List 408
- Connectivity Map 409
- Utilization Legend 410
- Resizing the Minimap 413
- Status bar 414
- Icon legend 415
- Host product icons 416
- SAN group icons 417
- Host group icons 417
- SAN port icons 418
- SAN product status icons 418
- Event icons 419
- Customizing the main window 420
- Exporting the topology 421
- Displaying columns 422
- Changing the order of columns 423
- Resizing the columns 423
- Sorting table information 423
- Copying table information 423
- Exporting table information 424
- Product List customization 425
- Editing a property label 426
- Deleting a property label 426
- Searching for a device 427
- Restricting a search by node 428
- Searching for an exact match 428
- SAN view management overview 429
- Editing a customized view 431
- Deleting a customized view 432
- Copying a view 433
- SAN topology layout 434
- Changing the product label 438
- Changing the port label 438
- Changing the port display 438
- Grouping on the topology 439
- Call Home 441
- overview 442
- System requirements 443
- Showing a Call Home center 446
- Hiding a Call Home center 446
- Editing a Call Home center 447
- Enabling a Call Home center 454
- Enabling supportSave 454
- Disabling a Call Home center 455
- Viewing Call Home status 456
- Defining an event filter 458
- Third-party tools 463
- Launching a Telnet session 464
- Launching an Element Manager 465
- Launching Web Tools 466
- Launching FCR configuration 466
- Launching Name Server 467
- Launching HCM Agent 468
- Launching Fabric Watch 469
- Adding a tool 469
- • Fabric and switch details 475
- Registering a SCOM server 476
- Editing a SCOM server 477
- Removing a SCOM server 477
- Server Management Console 479
- Services tab 480
- Refreshing the server status 481
- Stopping all services 481
- Stopping the CIMOM services 481
- Starting all services 482
- Restarting all services 482
- Ports tab 483
- AAA Settings tab 484
- FIGURE 177 AAA Settings tab 485
- Configuring a Radius server 486
- Configuring an LDAP server 489
- Configuring a TACACS+ server 492
- • Local Database 495
- Radius server configuration 497
- LDAP server configuration 499
- Loading an AD group 504
- TACACS+ server configuration 505
- Restore tab 506
- HCM Upgrade tab 508
- SMI Agent Configuration Tool 509
- SLP on UNIX systems 514
- SLP on Windows systems 514
- Home tab 515
- Authentication tab 516
- FIGURE 190 Authentication tab 517
- CIMOM tab 519
- Configuring the CIMOM log 521
- Certificate Management tab 522
- Viewing a certificate 523
- Exporting a certificate 523
- Summary tab 524
- FIGURE 193 Summary tab 525
- TABLE 39 525
- SAN Device Configuration 527
- Adaptive backup 529
- Viewing switch configurations 532
- Deleting a configuration 538
- Exporting a configuration 539
- Importing a configuration 539
- FIGURE 201 Compare dialog box 540
- Replicating configurations 544
- Configuration file management 545
- Step 3. Source Location 545
- Step 4. Source Configuration 545
- Step 5. Destination Switches 546
- TABLE 44 Step 6. Validation 547
- TABLE 45 Step 7. Summary 547
- Enhanced group management 550
- Firmware management 551
- FIGURE 203 Download tab 552
- FIGURE 204 Repository tab 554
- Importing a firmware file 555
- Deleting a firmware file 556
- Switch password management 557
- Resetting the switch password 559
- Frame viewer 560
- Viewing port connectivity 564
- Enabling a port 567
- Disabling a port 567
- Filtering port connectivity 567
- Resetting the filter 568
- Viewing port details 569
- Viewing ports 569
- Port types 570
- Showing connected ports 570
- • Connection properties 571
- Determining port status 574
- Viewing port optics 574
- Port commissioning 576
- CIMOM servers 578
- Registering a CIMOM server 578
- F_Port commissioning 584
- Recommissioning an F_Port 585
- E_Port commissioning 586
- Port commissioning by switch 587
- Port commissioning by blade 588
- E-mailing a report 592
- CIMCLI trouble shooting 593
- AD-enabled fabric discovery 595
- Feature AD context 596
- Port Auto Disable 598
- Unblocking ports 604
- Host Port Mapping 605
- Creating a new Host 606
- Renaming an HBA Host 607
- Deleting an HBA Host 607
- Viewing Host properties 607
- Importing HBA-to-Host mapping 608
- • Checks for duplicate HBAs 609
- Removing an HBA from a Host 610
- Exporting Host port mapping 610
- • \root (Linux) 611
- Storage Port Mapping 613
- Creating a storage array 614
- Deleting a storage array 616
- TABLE 55 Import Results 618
- Host Management 621
- Supported adapters 622
- Converged Network Adapters 623
- Fabric Adapters 623
- HCM software 624
- HCM features 625
- Host adapter discovery 626
- VM Manager 626
- Editing a VM Manager 627
- Deleting a VM Manager 627
- ESXi CIM listener ports 628
- Connectivity map 629
- View management 629
- Host port mapping 629
- Adapter software 630
- Driver repository 631
- Boot image repository 632
- Bulk port configuration 635
- Adding a port configuration 637
- Editing a port configuration 639
- Deleting a port configuration 639
- FAWWNs on attached AG ports 643
- Deleting AG port FAWWNs 644
- Role-based access control 645
- Host performance management 646
- Host security authentication 647
- Host fault management 649
- Filtering event notifications 650
- Backup support 651
- Fibre Channel over Ethernet 653
- Enhanced Ethernet features 654
- FCoE protocols supported 655
- FCoE licensing 656
- Saving running configurations 656
- DCB configuration management 657
- Switch policies 658
- DCB configuration 659
- Configuring LLDP 661
- Adding a LAG 664
- FIGURE 234 Add LAG dialog box 665
- Editing a DCB switch 666
- Editing a DCB port 668
- Editing a LAG 669
- Enabling a DCB port or LAG 671
- Deleting a LAG 671
- QoS configuration 672
- Creating a DCB map 673
- Editing a DCB map 674
- Deleting a DCB map 675
- Creating a Traffic Class map 676
- Editing a Traffic Class map 677
- Deleting a Traffic Class map 677
- FCoE provisioning 678
- VLAN classifier configuration 680
- Adding a VLAN classifier rule 681
- • ARP — 0x0808 682
- • IP — 0x8881 682
- • IPv6 — 0x86DD 682
- LLDP-DCBX configuration 684
- Adding an LLDP profile 685
- Editing an LLDP profile 686
- Deleting an LLDP profile 686
- 802.1x authentication 688
- FIGURE 242 802.1x dialog box 689
- Deploy to Products dialog box 691
- Deploy to Ports dialog box 691
- DCB performance 695
- Historical performance graph 697
- Historical performance report 697
- FCoE login groups 698
- Adding an FCoE login group 699
- Editing an FCoE login group 700
- Viewing virtual FCoE ports 702
- Clearing a stale entry 704
- Security Management 705
- Device_Name 706
- Port_Number 711
- • Save to running 717
- • Save to running and startup 717
- Virtual Fabrics overview 728
- Virtual Fabrics terms 728
- Virtual Fabrics requirements 729
- Configuring Virtual Fabrics 732
- Enabling Virtual Fabrics 733
- Disabling Virtual Fabrics 734
- Deleting a logical switch 739
- SAN Encryption Configuration 745
- Encryption Center features 746
- Encryption user privileges 747
- Smart card usage 748
- Using system cards 753
- Deregistering system cards 755
- Using smart cards 755
- Tracking smart cards 755
- Editing smart cards 758
- Network connections 759
- Blade processor links 759
- (KAC) certificate 760
- Configuration parameters 762
- Key vault type and vendor 763
- Establishing the trusted link 771
- Data Encryption Keys 774
- <primary 784
- - HTTPS Port 433 787
- - SSH Port 22 787
- - Enable SSH 787
- - KM Server Port 9000 787
- - Enable KM Server 787
- Creating a client on TEKA 788
- KAC_Certificate_Name.der 792
- Setting FIPS compliance 796
- Creating a local CA 797
- Creating a server certificate 798
- -----BEGIN CERTIFICATE 801
- Creating a cluster 803
- Backing up the certificates 809
- Configuring the KMIP server 811
- Adding a node to the cluster 812
- Encryption preparation 815
- • Key Vault Type: 819
- (LKM/SSKM) 826
- (ESKM/SKM) 832
- Protocol 846
- --initnode command 852
- --set -keyvault command 852
- --reg keyvault command 853
- Error Instructions dialog box 858
- High availability clusters 860
- Creating HA clusters 861
- Failback option 863
- Invoking failback 863
- Adding an encryption target 864
- 4. Click Next 865
- FIGURE 375 Next Steps screen 871
- Configuring storage arrays 879
- Remote replication LUNs 879
- SRDF pairs 880
- Moving targets 884
- Tape LUN statistics 887
- Encryption engine rebalancing 892
- Master keys 893
- Active master key 894
- Alternate master key 894
- Master key actions 894
- Creating a new master key 901
- Security settings 902
- Setting zeroization 903
- Redirection zones 904
- Disk device decommissioning 905
- Decommissioning disk LUNs 906
- Displaying Universal IDs 908
- Setting disk LUN Re-key All 909
- Thin provisioned LUNs 913
- General tab 921
- Members tab 925
- Members tab Remove button 926
- Security tab 927
- HA Clusters tab 929
- Link Keys tab 931
- Tape Pools tab 932
- Tape pools overview 933
- Adding tape pools 933
- Engine Operations tab 935
- TABLE 68 Encryption acronyms 936
- Zoning overview 937
- Red Zone 938
- Green Zone 938
- Blue Zone 938
- Online zoning 939
- Offline zoning 939
- Zone database size 940
- Zoning configuration 941
- Viewing zone properties 942
- Adding members to a zone 943
- Creating a member in a zone 944
- Removing a member from a zone 945
- Renaming a zone 945
- Deleting a zone 946
- Duplicating a zone 946
- Creating a zone alias 948
- Editing a zone alias 949
- Exporting zone aliases 950
- Renaming a zone alias 950
- Deleting a zone alias 950
- Duplicating a zone alias 951
- Creating a zone configuration 951
- Renaming a zone configuration 955
- Deleting a zone configuration 955
- Refreshing a zone database 958
- Merging fabrics 958
- Merging two zone databases 959
- LSAN zones 963
- Creating an LSAN zone 964
- LSAN tagging 967
- Traffic Isolation zones 968
- Boot LUN zones 973
- Modifying a Boot LUN zone 974
- Zoning administration 975
- Listing zone members 980
- Listing un-zoned members 981
- Removing an offline device 981
- Replacing zone members 982
- Fibre Channel over IP 985
- FCIP services licensing 986
- FCIP Concepts 986
- IP network considerations 986
- TABLE 70 FCIP capabilities 987
- FCIP trunking 988
- Circuit Failover Grouping 991
- Adaptive Rate Limiting 994
- Configuring QoS Priorities 995
- Term Definition 997
- QOS, DSCP, and VLANs 998
- DSCP quality of service 999
- Open systems tape pipelining 1000
- FICON emulation features 1001
- Tape write pipelining 1002
- Tape read pipelining 1002
- Teradata pipelining 1002
- 53-1003154-01 1003
- Planning the configuration 1004
- When to enable Fast Write 1007
- Compression mode 1008
- SRDF considerations 1008
- FCIP configuration guidelines 1009
- Configuring an FCIP tunnel 1010
- Adding an FCIP circuit 1014
- Circuit configuration failure 1018
- Enabling Tperf test mode 1019
- Configuring QoS percentages 1020
- Configuring FICON emulation 1021
- Viewing FCIP port properties 1026
- Editing FCIP circuits 1028
- Disabling FCIP tunnels 1029
- Enabling FCIP tunnels 1029
- Deleting FCIP tunnels 1030
- Disabling FCIP circuits 1030
- Enabling FCIP circuits 1030
- Deleting FCIP Circuits 1030
- (Figure 448) 1034
- Fabric Binding 1037
- Enabling fabric binding 1039
- Disabling fabric binding 1040
- Port Fencing 1045
- Thresholds 1048
- C3 Discard Frames threshold 1049
- Invalid CRCs threshold 1050
- Invalid words threshold 1050
- Link Reset threshold 1050
- Protocol error threshold 1050
- State Change threshold 1050
- Adding thresholds 1051
- Adding a Link Reset threshold 1055
- Assigning thresholds 1059
- Unblocking a port 1060
- Editing thresholds 1061
- Finding assigned thresholds 1065
- Viewing thresholds 1065
- Removing thresholds 1066
- FICON Environments 1069
- Configuring the switch 1072
- • “Enabling Virtual Fabrics” 1075
- Configuring FICON display 1077
- Changing window arrangement 1084
- Clearing port names 1084
- Cascaded FICON fabric 1085
- Enabling DLS 1087
- Cascaded FICON fabric merge 1088
- Resolving merge conflicts 1092
- Port groups 1093
- Viewing port groups 1095
- Editing a port group 1095
- Swapping blades 1096
- Deployment Manager 1099
- Deploying a configuration 1101
- Viewing deployment logs 1102
- In this chapter 1105
- FC troubleshooting 1105
- Tracing FC routes 1106
- Adding a detached device 1109
- Port diagnostics requirements 1110
- • Link traffic 1111
- • Latency measurement 1111
- • Measure link distance 1111
- FCIP troubleshooting 1114
- TABLE 82 IP Ping Details 1115
- Tracing IP routes 1116
- TABLE 83 IP Trace Details 1117
- Field/Component Description 1118
- Performance Data 1119
- SAN performance measures 1120
- Example of SNMP v1 1122
- SAN performance overview 1123
- Example of showing FCIP-MIB 1125
- Example of enabling FCIP-MIB 1125
- Example for FC ports 1126
- Example for FCIP tunnels 1126
- Graph display 1129
- Clearing port counters 1130
- • 5 minutes for last 8 days 1134
- Configuring the graph display 1135
- Filtering data by ports 1136
- Filtering data by time 1136
- Performance database views 1139
- TABLE 85 Performance counters 1141
- SAN end-to-end monitoring 1142
- SAN Top Talker monitoring 1147
- Pausing a Top Talker monitor 1151
- Bottleneck detection 1152
- How bottlenecks are reported 1153
- Example 1159
- FIGURE 484 Threshold example 1160
- Assigning a threshold policy 1163
- SAN connection utilization 1164
- • Press CTRL + U 1165
- Configuring graph options 1168
- FIGURE 492 1170
- FIGURE 493 1170
- Mouse functions for graphs 1174
- Flow Vision 1177
- Supported port types 1178
- Flow Vision terminology 1178
- Flow Vision features 1179
- Flow Vision flows 1180
- Flow definitions 1181
- Supported flow parameters 1183
- Number of supported flows 1183
- Learned flows 1184
- Monitoring flows 1185
- Resetting flow statistics 1188
- Activating flows 1188
- Deactivating flows 1189
- Deleting flows 1189
- Flow Monitor 1190
- Flow Monitor limitations 1191
- Configuring a learned flow 1207
- • Feature — Monitor 1208
- • Direction — Bidirectional 1208
- FIGURE 507 FC router fabric 1218
- Flow Generator 1229
- Flow Generator limitations 1230
- SIM-Ports 1231
- Enabling SIM-Port mode 1232
- Disabling SIM-Port mode 1233
- Column Information Displayed 1239
- Flow Mirror 1241
- FIGURE 513 Mirror flow 1242
- Flow Mirror limitations 1243
- • CPU Mirroring 1244
- • Local Flow Mirror 1244
- Monitoring a Flow Mirror flow 1246
- Tracking SCSI commands 1252
- • Static Flow 1256
- • Aggregated Flow 1256
- • Frame TYpe Monitoring 1256
- • LUN Monitoring 1256
- FIGURE 517 Sample Add Flow 1258
- Replacing Top Talker monitors 1273
- Replacing End-to-End monitors 1273
- Frame Monitor 1275
- Pre-defined frame types 1276
- Custom frame types 1276
- Frame Monitoring requirements 1277
- Editing a frame monitor 1279
- Policy Monitor 1283
- Fabric policy monitors 1284
- Icon Description 1290
- Policy_Name 1301
- Name — Product name 1304
- Fault Management 1307
- Event notification 1308
- ATTENTION 1309
- Defining filters 1310
- SNMP traps 1313
- SNMP trap forwarding 1315
- Adding a trap destination 1316
- Adding a new trap filter 1317
- Event reception 1319
- Adding an SNMP v3 credential 1321
- Trap customization 1324
- • Information about the trap 1325
- SNMP informs 1326
- Adding a syslog recipient 1327
- Removing a syslog recipient 1328
- Syslog forwarding 1329
- Adding a syslog filter 1330
- Event action definitions 1332
- Configuring varbind filters 1335
- Editing event actions 1340
- Special events handling 1341
- Acknowledging special events 1342
- Pseudo events 1347
- Setting pseudo event policies 1348
- Filtering pseudo event traps 1349
- Event custom reports 1358
- Defining report settings 1359
- Defining the report identity 1360
- Editing a report definition 1365
- Event custom report schedules 1366
- Event logs 1369
- Copying part of a log entry 1370
- Copying an entire log entry 1370
- Exporting the entire log 1370
- TABLE 107 Event Properties 1372
- Copying the entire Master Log 1373
- Exporting the Master Log 1374
- The “unnamed” filter 1376
- The “none” filter 1376
- Editing a filter 1376
- Duplicating a filter 1376
- Deleting a filter 1376
- Notes on filters 1377
- Supported hardware 1380
- MAPS license requirements 1380
- Enabling MAPS on a device 1381
- Virtual Fabrics 1382
- High availability 1382
- Admin Domains 1382
- Fabric Watch 1382
- MAPS structural elements 1387
- MAPS monitoring categories 1389
- • The port has gone offline 1390
- • The port has come online 1390
- • The port is faulty 1390
- Fabric monitoring category 1391
- Fabric measures (Continued) 1392
- FRU monitoring category 1393
- Security monitoring category 1393
- Resource monitoring category 1394
- FCIP monitoring category 1394
- TABLE 118 Traffic measures 1395
- MAPS policies 1396
- User-defined policies 1397
- Fabric Watch legacy policies 1397
- MAPS rules 1398
- MAPS conditions 1398
- MAPS actions 1399
- SNMP MIB support 1401
- Viewing MAPS policy data 1403
- Configuring a MAPS policy 1405
- Editing a MAPS policy 1408
- Cloning a MAPS policy 1408
- Importing Flow definitions 1409
- Removing imported Flows 1410
- Activating a MAPS policy 1411
- Exporting a MAPS policy 1412
- Importing a MAPS policy 1412
- Deleting a MAPS policy 1413
- Viewing MAPS policy rules 1413
- Comparing MAPS policies 1415
- MAPS groups 1417
- User-defined groups 1418
- Configuring a group 1418
- Editing a group 1421
- Deleting a group 1422
- Fabric/Device_Name 1423
- Creating multiple groups 1424
- Editing multiple groups 1425
- MAPS violations 1426
- MAPS events 1428
- Event field Description 1430
- Dashboard MAPS widgets 1431
- Master Log 1431
- Technical Support 1433
- Device technical support 1437
- Field Description 1440
- Upload failure data capture 1444
- Reports overview 1449
- SAN report types 1450
- Generating SAN reports 1450
- Viewing SAN reports 1451
- Fabric Summary Report 1452
- Fabric Ports Report 1454
- Exporting SAN reports 1456
- Printing SAN reports 1456
- Deleting SAN reports 1457
- Generating SAN zoning reports 1459
- Host adapter reports 1459
- Adapters Inventory report 1460
- Adapters Faulty SFP report 1461
- Application menus 1463
- SAN main menus 1464
- SAN shortcut menus 1474
- Call Home Event Tables 1491
- TABLE 128 # Thermal Events 1492
- TABLE 129 Fabric OS Events 1492
- Fabric OS Events (Continued) 1493
- Event Categories 1495
- Product audit events 1496
- Security events 1497
- User action events 1498
- Management server events 1498
- Product events 1499
- RASLog Events 1499
- User Privileges 1503
- About user privileges 1504
- • Fabric Ports 1509
- • Fabric Summary 1509
- Information Model 1518
- Object Manager 1518
- About Roles and Access Levels 1521
- Device Properties 1525
- Viewing SAN device properties 1526
- Device properties (Continued) 1528
- • FC Ports 1529
- • GigE Ports 1529
- • IP Ports 1529
- • iSCSI Ports 1529
- • Virtual Sessions Ports 1529
- Viewing storage properties 1530
- Viewing iSCSI properties 1532
- TABLE 139 iSCSI Properties 1533
- Viewing port properties 1534
- TABLE 140 Port properties 1535
- • Authentication Algorithm 1536
- • Encryption Algorithm 1536
- • Diffie-Hellman 1536
- • SA Life 1536
- Port properties (Continued) 1537
- • IP Ping 1538
- • IP Traceroute 1538
- • IP Performance 1538
- Viewing VC module properties 1539
- TABLE 141 Properties tab 1540
- TABLE 142 Port tab 1540
- TABLE 143 NPIV WWNs tab 1540
- Host properties 1541
- Properties customization 1544
- Editing a property field 1545
- Deleting a property field 1545
- Regular Expressions 1547
- TABLE 2 Character classes 1548
- TABLE 1 Characters 1548
- TABLE 7 Boundary matches 1549
- TABLE 8 Greedy quantifiers 1550
- TABLE 9 Reluctant quantifiers 1550
- TABLE 11 Logical operators 1550
- TABLE 12 Back references 1551
- Troubleshooting 1553
- Browser troubleshooting 1554
- Discovery troubleshooting 1556
- FICON troubleshooting 1556
- Launch Client troubleshooting 1558
- Names troubleshooting 1560
- Patch troubleshooting 1560
- Performance troubleshooting 1561
- Port Fencing troubleshooting 1565
- Server troubleshooting 1565
- Supportsave troubleshooting 1567
- View All list troubleshooting 1568
- Wireless troubleshooting 1569
- Zoning troubleshooting 1569
- Database Fields 1571
- TABLE 19 ACH_EVENT_FILTER_MAP 1572
- TABLE 20 ACH_FILTER 1572
- TABLE 21 ACH_INFO 1572
- TABLE 22 AD_GROUP 1572
- TABLE 26 AOR_DEVICE_GROUP_MAP 1573
- TABLE 34 BIRTREPORT_PARAMETER 1575
- • 1 indicates PDF 1576
- • 2 indicates CSV 1576
- Database tables and fields 1577
- BIRTREPORT_SCHEDULE_PARAMETER 1577
- BIRTREPORT_SCHEDULE_TEMPLATE 1577
- BIRTTEMPLATE_PARAMETER 1577
- BOOT_IMAGE_DRIVER_MAP 1577
- TABLE 42 BOOT_LUN_SEQUENCE 1578
- TABLE 44 CAPABILITY_ 1578
- TABLE 45 CARD 1578
- TABLE 45 CARD (Continued) 1579
- • 0 - 1G 1580
- • 1 - 10G 1580
- • 2 - Dual mode 1580
- • 3 - Failover mode 1580
- TABLE 50 CEE_PORT 1581
- TABLE 51 CFG_BACKUP_ARCHIVE 1581
- TABLE 52 CHANGELOG 1582
- TABLE 53 CLI_TEMPLATE 1582
- TABLE 54 CLIENT_VIEW 1583
- TABLE 55 CLIENT_VIEW_COLUMN 1584
- TABLE 56 CLIENT_VIEW_MEMBER 1584
- TABLE 58 CLUSTER 1584
- TABLE 59 CLUSTER_MEMBER 1584
- TABLE 60 CNA_ETH_PORT 1585
- TABLE 62 CNA_ETH_PORT_CONFIG 1585
- TABLE 63 CNA_PORT 1586
- TABLE 64 COLLECTOR 1586
- TABLE 68 CONFIG_BLOCK 1587
- TABLE 69 CONFIG_CONDITION 1588
- TABLE 70 CORE_SWITCH 1588
- CORE_SWITCH (Continued) 1589
- TABLE 72 CORE_SWITCH_CHECKSUM 1590
- TABLE 74 CORE_SWITCH_DETAILS 1590
- • 1 is supported 1591
- • 0 is not supported 1591
- TABLE 75 CRYPTO_HOST 1592
- TABLE 76 CRYPTO_LUN 1593
- CRYPTO_LUN (Continued) 1594
- TABLE 77 CRYPTO_SWITCH 1595
- CRYPTO_TARGET_CONTAINER 1596
- CRYPTO_SWITCH (Continued) 1596
- TABLE 80 DASHBOARD 1597
- TABLE 81 DASHBOARD_CANVAS 1598
- TABLE 83 DASHBOARD_PROVIDER 1598
- TABLE 84 DASHBOARD_WIDGET 1599
- TABLE 86 DEFAULT_FAVORITES 1600
- DEFAULT_WIDGET_PREFERENCE 1601
- DEPLOYMENT_CONFIGURATION 1601
- DEFAULT_FAVORITES (Continued) 1601
- • 1-Presnapshot 1602
- • 2-Postsnapshot 1602
- • 3-Pre & Post snapshot 1602
- TABLE 92 DEPLOYMENT_STATUS 1603
- TABLE 94 DEVICE 1604
- TABLE 94 DEVICE (Continued) 1605
- TABLE 95 DEVICE_CONNECTION 1610
- TABLE 96 DEVICE_ENCLOSURE 1611
- DEVICE_ENCLOSURE_MEMBER 1612
- DEVICE_ENCLOSURE (Continued) 1612
- TABLE 98 DEVICE_FDMI_DETAILS 1613
- TABLE 99 DEVICE_GROUP 1613
- TABLE 100 DEVICE_GROUP_ENTRY 1614
- TABLE 101 DEVICE_GROUP 1614
- TABLE 103 DEVICE_NODE 1614
- TABLE 104 DEVICE_PORT 1615
- TABLE 107 DISK_USAGE 1617
- TABLE 108 ENCRYPTION_ENGINE 1617
- ENCRYPTION_ENGINE (Continued) 1618
- TABLE 109 ENCRYPTION_GROUP 1619
- ENCRYPTION_GROUP (Continued) 1620
- ENCRYPTION_GROUP_MEMBER 1621
- ENCRYPTION_KMIP_PARAMETERS 1621
- ENCRYPTION_TAPE_POOL 1621
- TABLE 113 ETHERNET_CLOUD 1622
- TABLE 114 ETHERNET_ISL 1622
- TABLE 115 EVENT 1622
- TABLE 115 EVENT (Continued) 1623
- TABLE 116 EVENT_CALL_HOME 1624
- TABLE 117 EVENT_CATEGORY 1624
- TABLE 118 EVENT_DESCRIPTION 1624
- TABLE 119 EVENT_DETAILS 1624
- TABLE 120 EVENT_FWD_FILTER 1625
- TABLE 121 EVENT_INSTANCE 1625
- TABLE 122 EVENT_MODULE 1626
- TABLE 123 EVENT_NOTIFICATION 1626
- TABLE 124 EVENT_ORIGIN 1627
- TABLE 125 EVENT_POLICY 1627
- TABLE 127 EVENT_PROCESSOR_MAP 1628
- TABLE 128 EVENT_RULE 1629
- TABLE 129 EVENT_RULE_ACTION 1629
- TABLE 130 FABRIC 1630
- TABLE 130 FABRIC (Continued) 1631
- TABLE 131 FABRIC_CHECKSUM 1632
- TABLE 132 FABRIC_COLLECTION 1632
- TABLE 135 FABRIC_MEMBER 1633
- TABLE 139 FAVORITES 1634
- TABLE 142 FCIP_TUNNEL 1635
- FCIP_TUNNEL (Continued) 1636
- FCIP_TUNNEL_CIRCUIT 1638
- FCIP_TUNNEL_PERFORMANCE 1641
- TABLE 145 FCOE_DEVICE 1642
- TABLE 146 FCR_ROUTE 1642
- TABLE 147 FEATURE 1642
- TABLE 148 FEATURE_EDITION_MAP 1642
- TABLE 149 FEATURES_USAGE 1642
- TABLE 150 FICON_DEVICE_PORT 1643
- TABLE 153 FOUNDRY_DEVICE 1644
- TABLE 154 FOUNDRY_MODULE 1644
- TABLE 157 FPORT_TRUNK_GROUP 1645
- TABLE 158 FPORT_TRUNK_MEMBER 1645
- TABLE 159 FRU 1646
- TABLE 160 FTP_SERVER 1647
- TABLE 161 GENERATED_REPORT 1647
- TABLE 159 FRU (Continued) 1647
- TABLE 162 GIGE_PORT 1648
- TABLE 164 GIGE_PORT_STATS 1649
- TABLE 165 GLOBAL_VLAN 1649
- TABLE 167 HA_CLUSTER 1650
- TABLE 168 HBA 1650
- TABLE 168 HBA (Continued) 1651
- • HBA/CNA/AnyIO/Mezzanine 1652
- • 0 - Unknow 1653
- • 1 - Yes 1653
- • 2 - No 1653
- TABLE 171 HBA_PORT_DETAIL 1654
- HBA_PORT_DETAIL (Continued) 1655
- HBA_PORT_DEVICE_PORT_MAP 1656
- HBA_PORT_FCOE_DETAILS 1656
- TABLE 174 HBA_REMOTE_PORT 1658
- HBA_REMOTE_PORT_LUN 1659
- HBA_REMOTE_PORT (Continued) 1659
- TABLE 176 HBA_TARGET 1660
- TABLE 177 HEALTH_STATUS 1660
- HOST_DISCOVERY_OPTIONS 1661
- HOST_DISCOVERY_REQ_GROUP 1662
- HOST_DISCOVERY_REQUEST 1662
- HOST_DISCOVERY_REQUESTS 1663
- HYPER_V_VIRTUAL_MACHINE 1663
- TABLE 186 IFL 1664
- TABLE 187 IFL_CONNECTION 1664
- TABLE 188 INTERFACE 1665
- TABLE 190 IP_DEVICE_LICENSE 1666
- TABLE 191 IP_INTERFACE 1667
- TABLE 192 IP_PORT_GROUP 1667
- TABLE 193 IP_ROUTE 1667
- TABLE 194 IP_SUBNET_VLAN 1668
- TABLE 195 IPX_NETWORK_VLAN 1668
- TABLE 196 ISL 1668
- • 0 denotes untrusted 1669
- • 1 denotes trusted 1669
- • 0 denotes present 1669
- TABLE 198 ISL_TRUNK_GROUP 1670
- TABLE 197 ISL_CONNECTION 1670
- TABLE 199 ISL_TRUNK_MEMBER 1671
- TABLE 200 KEY_VAULT 1671
- • 0 = Standard 1672
- • 1= Extended 1672
- • 1 = Clear stats is enabled 1672
- TABLE 205 L2_NEIGHBOR 1673
- TABLE 208 LAG 1674
- TABLE 209 LAG_MEMBER 1675
- TABLE 208 LAG (Continued) 1675
- TABLE 212 LICENSE 1676
- TABLE 214 LICENSE_FEATURE_MAP 1677
- TABLE 215 LICENSE_RULE 1677
- TABLE 216 LICENSED_FEATURE 1677
- TABLE 217 LINK 1678
- TABLE 218 LOCK 1678
- TABLE 219 LSAN_DEVICE 1678
- TABLE 220 LSAN_TAG_CONFIG 1678
- TABLE 221 LSAN_PROXY_DEVICE 1679
- TABLE 222 LSAN_ZONE 1679
- TABLE 223 LSAN_ZONE_DB_CONFIG 1679
- TABLE 224 LSAN_ZONE_MEMBER 1679
- TABLE 225 MCT_CLIENT 1679
- • Deployed(0) 1680
- • Undeployed(1) 1680
- TABLE 229 MAC_GROUP 1681
- TABLE 230 MAC_GROUP_MEMBER 1681
- TABLE 231 MANAGED_ELEMENT 1681
- TABLE 232 MAPS_EVENT 1682
- TABLE 233 MAPS_EVENT_DETAILS 1682
- TABLE 235 MAPS_POLICY 1683
- TABLE 236 MARCHING_ANTS 1683
- TABLE 237 MEASURE 1683
- TABLE 238 MESSAGE_RECIPIENT 1684
- TABLE 239 MIGRATION_HISTORY 1684
- TABLE 237 MEASURE (Continued) 1684
- TABLE 240 MODULE 1685
- TABLE 241 MODULE_SLOT_PRESENT 1686
- TABLE 242 MPLS_ADMIN_GROUP 1686
- TABLE 240 MODULE (Continued) 1686
- TABLE 244 MPLS_LSP 1687
- TABLE 245 MPLS_PATH 1687
- TABLE 246 MPLS_PATH_HOP 1687
- TABLE 247 MPLS_RSVP_LSP 1688
- MPLS_RSVP_LSP_ADMIN_GROUP 1689
- MPLS_RSVP_LSP_FRR_PARAMETERS 1689
- TABLE 253 MPLS_RSVP_LSP_PATH 1690
- TABLE 255 MPLS_SERVICE 1691
- MPLS_SERVICE_PEER_RELATION 1692
- TABLE 259 MRP_RING 1693
- TABLE 260 MRP_RING_DEVICE 1693
- TABLE 261 N2F_PORT_MAP 1694
- TABLE 262 NETWORK_VLAN 1694
- TABLE 263 NETWORK_SCOPE_TYPE 1695
- TABLE 264 NIC_PROFILE 1695
- TABLE 265 NPORT_WWN_MAP 1695
- TABLE 266 NP_FLOW_DEFINITION 1695
- TABLE 267 NP_SUB_FLOW 1696
- TABLE 269 OUI_VENDOR 1697
- • device level collector is 0 1698
- • port level collector is 1 1698
- TABLE 273 PBR_NEXT_HOP 1699
- TABLE 274 PBR_POLICY 1699
- TABLE 275 PBR_RULE 1699
- TABLE 276 PBR_RULE_ACL_LIST 1699
- TABLE 277 PHANTOM_PORT 1700
- TABLE 278 PHYSICAL_DEVICE 1700
- TABLE 279 PHYSICAL_INTERFACE 1701
- TABLE 280 PHYSICAL_PORT 1702
- TABLE 284 PM_DASHBOARD_WIDGET 1703
- TABLE 285 PM_DATA_COLLECTOR 1704
- TABLE 286 PM_MEASURE 1705
- • 0 = product level 1707
- • 1 = port level 1707
- • 0 = disabled 1707
- • 1 = enabled 1707
- TABLE 296 POE_THRESHOLD_EVENT 1708
- TABLE 297 POLICY_RULE 1708
- TABLE 298 POLICY_RULE_MAP 1708
- PORT_BOTTLENECK_CONFIG 1709
- PORT_BOTTLENECK_STATUS 1709
- PORT_COMMISSION_CIMOM_SERVER 1709
- TABLE 302 PORT_FENCING_POLICY 1710
- TABLE 304 PORT_PROFILE 1711
- TABLE 305 PORT_PROFILE_DOMAIN 1711
- PORT_PROFILE_QOS_PFC_MAP 1713
- PORT_PROFILE_VLAN_MAP 1713
- PORT_PROFILE_QOS_MAP 1713
- • 0 = Disabled 1714
- • 1 = Enabled 1714
- TABLE 313 PRIVILEGE 1715
- TABLE 314 PRODUCT_APP 1715
- TABLE 315 PROTOCOL_VLAN 1716
- TABLE 316 QRTZ_BLOB_TRIGGERS 1716
- TABLE 317 QRTZ_CALENDARS 1716
- TABLE 318 QRTZ_CRON_TRIGGERS 1716
- TABLE 319 QRTZ_FIRED_TRIGGERS 1716
- TABLE 320 QRTZ_JOB_DETAILS 1717
- TABLE 321 QRTZ_JOB_LISTENERS 1717
- TABLE 322 QRTZ_LOCKS 1717
- QRTZ_PAUSED_TRIGGER_GRPS 1718
- QRTZ_SCHEDULER_STATE 1718
- QRTZ_SIMPLE_TRIGGERS 1718
- QRTZ_SIMPROP_TRIGGERS 1718
- TABLE 328 QRTZ_TRIGGERS 1719
- TABLE 331 RAS_LOG 1720
- TABLE 332 RECIPIENT_TYPE 1720
- TABLE 334 REPORT_TYPE 1720
- TABLE 335 REPORT_TEMPLATE 1721
- • 0= Not Hidden 1722
- • 1= Hidden 1722
- TABLE 344 RULE_CONDITION_MAP 1723
- TABLE 346 SAN 1723
- TABLE 347 SAN_CONNECTION 1723
- TABLE 348 SCOM_HOST 1724
- TABLE 349 SECURITY_POLICY 1724
- TABLE 351 SENSOR 1725
- TABLE 352 SFLOW_CHECKPOINT 1726
- TABLE 353 SFLOW_HOUR_SUMMARY 1726
- TABLE 351 SENSOR (Continued) 1726
- • 0 means its edge port 1728
- • 1 means its trill port 1728
- TABLE 358 SFLOW_MINUTE_MAC 1729
- TABLE 361 SFLOW_MINUTE_VLAN 1730
- • 1 means its fabric port 1731
- SFLOW_STAGING (Continued) 1732
- TABLE 366 SFLOW_STAGING_SLNUM 1733
- TABLE 367 SMART_CARD 1733
- • 1-Pre snapshot 1734
- • 2-Post snapshot 1734
- TABLE 371 SNMP_DATA 1735
- TABLE 372 SNMP_DATA_1DAY 1736
- TABLE 373 SNMP_DATA_2HOUR 1736
- TABLE 374 SNMP_DATA_30MIN 1737
- TABLE 375 SNMP_EXPR_DATA 1737
- TABLE 378 SNMP_EXPRESSION 1738
- TABLE 379 SNMP_PROFILE 1738
- SNMP_PROFILE (Continued) 1739
- TABLE 383 SSL_CERTIFICATE 1740
- TABLE 385 SSL_KEY 1741
- TABLE 386 SSL_KEY_PASSWORD 1742
- TABLE 387 STATS_AGING 1742
- TABLE 388 STP_PORT 1742
- TABLE 385 SSL_KEY (Continued) 1742
- TABLE 389 STP_INSTANCE 1743
- • 0 - Disabled 1744
- • 1 - Enabled 1744
- • CEE_RUNNING=1 1745
- • CEE_STARTUP=2 1745
- • INVALID=-1 1745
- TABLE 393 SWITCH_LICENSE 1746
- TABLE 394 SWITCH_MODEL 1746
- TABLE 395 SWITCH_PORT 1747
- SWITCH_PORT (Continued) 1748
- SWITCH_PORT_PERFORMANCE 1751
- TABLE 399 SYSTEM_PROPERTY 1752
- TABLE 400 TARGET_TYPE 1753
- TABLE 401 THIRD_PARTY_DEVICE 1753
- TABLE 402 THRESHOLD_MEASURE 1753
- TABLE 403 THRESHOLD_POLICY 1753
- TABLE 404 TIME_SERIES_DATA 1753
- TIME_SERIES_DATA_1DAY 1754
- TIME_SERIES_DATA_2HOUR 1754
- TIME_SERIES_DATA (Continued) 1754
- TABLE 408 TIME_SERIES_DATA_1 1755
- TIME_SERIES_DATA_1_1DAY 1756
- TIME_SERIES_DATA_1_2HOUR 1756
- TABLE 412 TIME_SERIES_DATA_2 1757
- TIME_SERIES_DATA_2_1DAY 1758
- TIME_SERIES_DATA_2_2HOUR 1759
- TIME_SERIES_DATA_2_30MIN 1759
- TABLE 416 TIME_SERIES_DATA_3 1760
- TIME_SERIES_DATA_3_2HOUR 1761
- TIME_SERIES_DATA_3_30MIN 1761
- TABLE 420 TIME_SERIES_DATA_4 1762
- TIME_SERIES_DATA_4_1DAY 1763
- TIME_SERIES_DATA_4_2HOUR 1763
- TABLE 424 TIME_SERIES_DATA_5 1764
- TIME_SERIES_DATA_5_30MIN 1765
- TABLE 426 TOOL_APP 1766
- TABLE 427 TOOL_PATH 1766
- TABLE 428 TOPO_MAP_IMAGE 1766
- TABLE 429 TRILL 1766
- TABLE 430 TRILL_TRUNK_GROUP 1767
- TABLE 431 TRILL_TRUNK_MEMBER 1767
- TABLE 433 TRUNK_GROUP_MEMBER 1767
- • 0=Disabled 1768
- • 1=Enabled 1768
- USER_DEFINED_DEVICE_DETAIL 1769
- USERDEFINED_NETWORK_SCOPE 1769
- TABLE 439 USER_PREFERENCE 1770
- TABLE 442 USER_RESOURCE_MAP 1770
- TABLE 443 USER_ROLE_MAP 1770
- TABLE 444 USER_STATE_MAP 1771
- TABLE 445 V_PORT_DETAIL 1771
- TABLE 446 VCN_ICL 1771
- TABLE 447 VCN_MEMBER 1771
- • Disabled(0) 1772
- • Enabled(1) 1772
- TABLE 450 VCEM_PROFILE 1773
- TABLE 451 VIP_SERVER 1773
- TABLE 452 VIP_SERVER_BINDING 1774
- TABLE 454 VIRTUAL_FCOE_PORT 1774
- VIRTUAL_FCOE_PORT_MAC_MEMBER 1775
- VIRTUAL_FCOE_PORT_STAT 1775
- VIRTUAL_FCOE_PORT (Continued) 1775
- • 1-Enabled 1776
- • 0-disabled 1776
- VIRTUAL_SWITCH (Continued) 1777
- TABLE 472 VMOTION_EVENT 1783
- TABLE 474 VM_DATA_CENTER 1784
- TABLE 476 VM_DV_PORT 1785
- TABLE 477 VM_DV_PORT_GROUP 1786
- TABLE 478 VM_DV_SWITCH 1787
- TABLE 480 VM_FC_HBA 1788
- • Fabric 1789
- • Point to point 1789
- • Unknown 1789
- VM_HOST_END_DEV_CONNECTIVITY 1790
- VM_HOST_PROXY_SWITCH 1790
- VM_HOST (Continued) 1790
- TABLE 486 VM_HOST_VIRTUAL_NIC 1791
- TABLE 487 VM_NETWORK_SETTINGS 1792
- TABLE 489 VM_PATH 1793
- TABLE 490 VM_PHYSICAL_NIC 1794
- TABLE 489 VM_PATH (Continued) 1794
- TABLE 491 VM_SECURITY_POLICY 1795
- • VMKernel 1796
- • Service Console 1796
- TABLE 495 VM_STORAGE 1797
- TABLE 498 VM_VCENTER 1798
- TABLE 499 VM_VCENTER_MEMBER 1799
- TABLE 501 VM_VIRTUAL_MACHINE 1801
- VPLS_DEVICE_RELATION 1802
- VPLS_ENDPOINT_RELATION 1802
- TABLE 505 VR_CONN_DOMAIN 1803
- TABLE 508 VR_CONN_MODULE 1804
- TABLE 509 VR_CONN_MODULE_PORT 1804
- TABLE 511 VR_CONN_WWN 1805
- TABLE 514 WT_ARCHIVE 1806
- TABLE 515 ZONE 1806
- TABLE 516 ZONE_ALIAS 1807
- TABLE 517 ZONE_ALIAS_IN_ZONE 1807
- TABLE 518 ZONE_ALIAS_MEMBER 1807
- TABLE 519 ZONE_DB 1807
- TABLE 520 ZONE_DB_CONFIG 1808
- TABLE 521 ZONE_DB_CONTENT 1808
- TABLE 522 ZONE_DB_USERS 1808
- TABLE 523 ZONE_IN-ZONE_SET 1808
- TABLE 524 ZONE_MEMBER 1808
- ADAPTER_PORT_CONFIG_INFO 1809
- AG_CONNECTION_INFO 1809
- BIRTREPORT_SCHEDULE_INFO 1810
- BOOT_IMAGE_FILE_DETAILS_INFO 1811
- CNA_ETH_PORT_CONFIG_INFO 1811
- CNA_PORT_DETAILS_INFO 1812
- CNA_PORT_INFO 1812
- CORE_SWITCH_DETAILS_INFO 1813
- CRYPTO_HOST_LUN_INFO 1814
- CRYPTO_TARGET_ENGINE_INFO 1815
- DASHBOARD_PREFERENCES_INFO 1815
- DEPLOYMENT_INFO 1816
- DEPLOYMENT_LOG 1817
- DEVICE_CONNECTION_INFO 1817
- EE_MONITOR_STATS_5MIN_INFO 1818
- EE_MONITOR_STATS_30MIN_INFO 1818
- EE_MONITOR_STATS_2HOUR_INFO 1818
- EE_MONITOR_STATS_1DAY_INFO 1819
- TE_PORT_STATS_5MIN_INFO 1819
- TE_PORT_STATS_30MIN_INFO 1820
- TE_PORT_STATS_2HOUR_INFO 1820
- TE_PORT_STATS_1DAY_INFO 1820
- SWITCH_INFO 1821
- SWITCH_REPORT_INFO 1823
- DEVICE_INFO 1825
- N2F_PORT_MAP_INFO 1826
- DEVICE_NODE_INFO 1827
- DEVICE_PORT_INFO 1828
- DEVICE_REPORT_INFO 1829
- DEV_PORT_GIGE_PORT_LINK_INFO 1830
- DEV_PORT_MAC_ADDR_MAP_INFO 1830
- ISL_CONNECTION_INFO 1831
- ISL_INFO 1831
- ETHERNET_ISL_INFO 1832
- EVENT_DETAILS_INFO 1833
- EVENT_INFO 1834
- FABRIC_INFO 1835
- FCIP_TUNNEL_CIRCUIT_INFO 1836
- FCIP_TUNNEL_INFO 1837
- FCOE_DEVICE_INFO 1838
- FRU_INFO 1838
- GIGE_PORT_ECLOUD_LINK_INFO 1839
- GIGE_PORT_INFO 1839
- GENERATED_BIRTREPORT_INFO 1840
- HBA_PORT_DETAILS_INFO 1841
- HBA_TARGET_INFO 1843
- HEALTH_STATUS_INFO 1844
- HOST_INVENTORY_REPORT_INFO 1845
- HOST_DISCOVERY_REQUEST_INFO 1848
- HOST_DISCOVERY_REQUESTS_INFO 1849
- IFL_INFO 1851
- IFL_REPORT_INFO 1851
- ISL_REPORT_INFO 1855
- ISL_TRILL_INFO 1857
- ISL_TRUNK_GROUP_MEMBER_INFO 1858
- ISL_TRUNK_INFO 1859
- L2_NEIGHBOR_INFO 1859
- MAPS_EVENT_DETAILS_INFO 1860
- N2F_PORT_MAP_REPORT_INFO 1861
- MODULE_INFO 1864
- NPORT_WWN_MAP_INFO 1866
- PHANTOM_PORT_INFO 1866
- PRODUCT_INFO 1867
- PORT_BOTTLENECK_CONF_INFO 1869
- PORT_BOTTLENECK_STAT_INFO 1869
- PORT_GROUP_INFO 1870
- ROLE_PRIVILEGE_INFO 1870
- PORT_PROFILE_INFO 1871
- PORT_PROFILE_INTERFACE_INFO 1871
- PORT_PROFILE_MAC_INFO 1872
- PORT_VLAN_INFO 1872
- PROTOCOL_VLAN_INFO 1873
- SFLOW_MINUTE_L3_VIEW 1873
- SFLOW_MINUTE_MAC_VIEW 1873
- SCOM_EE_MONITOR_INFO 1874
- SENSOR_INFO 1874
- SMART_CARD_USAGE_INFO 1875
- SWITCH_CONFIG_INFO 1876
- SWITCH_PORT_DETAILS_INFO 1877
- SWITCH_DETAILS_INFO 1882
- SWITCH_DISCOVERED_MAC_INFO 1884
- SWITCH_PORT_INFO 1884
- SWITCH_SNMP_INFO 1886
- TIME_SERIES_DATA_INFO 1888
- TIME_SERIES_DATA_VIEW 1889
- TRILL_INFO 1890
- TRILL_TRUNK_INFO 1891
- USER_ROLE_RESOURCE_INFO 1891
- VIRTUAL_FCOE_PORT_INFO 1892
- VIRTUAL_PORT_WWN_DETAILS_INFO 1892
- VM_ADDRESS_INFO 1893
- VLAN_INT_CLASSIFIER_INFO 1894
- VM_CONNECTIVITY_INFO 1894
- VM_NETWORK_CONNECTIVITY_INFO 1897
- VM_DATASTORE_DETAILS_INFO 1899
- VM_EE_MONITOR_INFO 1899
- VM_HOST_INFO 1900
- VM_LUN_INFO 1901
- VM_STATISTICS_INFO 1901
- VR_CONN_MODULE_INFO 1903
- VR_CONN_MODULE_PORT_INFO 1905
- VR_CONN_NPIV_INFO 1906
- VMM_DISCOVERED_MAC_INFO 1907
- ZONE_DB_INFO 1908
- ZONE_DB_REPORT_INFO 1909
- AP_USAGE 1909
- SFLOW_MINUTE_BGP_VIEW 1909
- SFLOW_MINUTE_VLAN_VIEW 1910
- PHYSICAL_DEVICE_INFO 1910
- SLOT_INFO 1910
- MANAGED_ELEMENT_INFO 1911
- SNMP_DATA_INFO 1911
- SNMP_EXPR_DATA_INFO 1911
- SNMP_DATA_VIEW 1911
- VM_VNETWORK_INFO 1914
- VCS_CLUSTER_MEMBER_INFO 1915
- RESET_VCS_LICENSED 1916
- WIRELESS_INTERFACE 1916
- WIRED_INTERFACE 1917
- CEE_PORT_INFO 1919
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.070 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce