Brocade FastIron Ethernet Switch Security Configuration Gu Uživatelský manuál stáhnout pdf (Strana 200)

802.1X accounting attributes for RADIUS (Continued)TABLE 14

Attribute name Attribute ID Data Type Description

Acct-Status-Type 40 integer Indicates whether the accounting request marks the beginning (start)

or end (stop) of the user service.

1 - Start

2 - Stop

Calling-Station-Id 31 string The supplicant MAC address in ASCII format (upper case only), with

octet values separated by a dash (-). For example 00-00-00-23-19-C0

NAS-Identifier 32 string The hostname of the device. Here NAS stands for "network access

server".

NAS-Port 5 integer The physical port number. Here NAS stands for "network access

server".

NAS-Port-Type 61 integer The physical port type. Here NAS stands for "network access server".

user-name 1 string The user name.

Enabling 802.1X accounting

To enable 802.1X accounting, enter the following command.

device(config)#aaa accounting dot1x default start-stop radius none

Syntax: aaa accounting dot1x default start-stop { radius | none }

radius - Use the list of all RADIUS servers that support 802.1X for authentication.

none - Use no authentication. The client is automatically authenticated without the device using

information supplied by the client.

NOTE

If you specify both radius and none , make sure radius comes before none .

Displaying 802.1X information

You can display the following 802.1X-related information:

• The 802.1X configuration on the device and on individual ports

• Statistics about the EAPOL frames passing through the device

• 802.1X-enabled ports dynamically assigned to a VLAN

• User-defined and dynamically applied MAC address filters and IP ACLs currently active on the

device

• The 802.1X multiple-host configuration

Enabling 802.1X accounting

200 FastIron Ethernet Switch Security Configuration Guide

53-1003088-03

1 2 ... 195 196 197 198 199 200 201 202 203 204 205 ... 395 396

Žádné komentáře

Brocade FastIron Ethernet Switch Security Configuration Gu Uživatelský manuál Strana 200