Brocade FastIron Ethernet Switch Security Configuration Gu Uživatelský manuál Strana 254

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 396
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 253
Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600
ICX 7750
Multi-Device Port Authentication 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Automatic removal of Dynamic VLAN for
MAC authenticated ports
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Authenticating multiple MAC addresses
on an interface
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Authenticating clients that send tagged
packets on non-member ports
No No No No No 08.0.01 No
Specifying the format of the MAC
addresses sent to the RADIUS server
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Specifying the authentication-failure
action
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Password override 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Specifying the RADIUS timeout action 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
SNMP Traps 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
MAC Address Filters 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
MAC address filter override of 802.1X No No No No No No No
MAC address filtering (filtering on source
and destination MAC addresses)
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Aging time for blocked MAC Addresses 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
NOTE
FCX devices do not support:- multi-device authentication on dynamic (LACP) and static trunk ports-
multi-device authentication and port security configured on the same port- multi-device authentication
and lock-address configured on the same port
Multi-device port authentication is a way to configure a Brocade device to forward or block traffic from
a MAC address based on information received from a RADIUS server.
How multi-device port authentication works
Multi-device port authentication is a way to configure a Brocade device to forward or block traffic from
a MAC address based on information received from a RADIUS server.
The multi-device port authentication feature is a mechanism by which incoming traffic originating from
a specific MAC address is switched or forwarded by the device only if the source MAC address is
successfully authenticated by a RADIUS server. The MAC address itself is used as the username and
password for RADIUS authentication; the user does not need to provide a specific username and
password to gain access to the network. If RADIUS authentication for the MAC address is successful,
traffic from the MAC address is forwarded in hardware.
If the RADIUS server cannot validate the user's MAC address, then it is considered an authentication
failure, and a specified authentication-failure action can be taken. The default authentication-failure
action is to drop traffic from the non-authenticated MAC address in hardware. You can also configure
How multi-device port authentication works
254 FastIron Ethernet Switch Security Configuration Guide
53-1003088-03
Zobrazit stránku 253
1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 395 396

Komentáře k této Příručce

Žádné komentáře