Brocade Mobility RFS7000-GR Controller CLI Reference Guide Uživatelský manuál stáhnout pdf (Strana 406)

100

101

392 Brocade Mobility RFS7000-GR CLI Reference Guide

53-1001945-01

MAC Extended ACL Config Commands

mark

MAC Extended ACL Config Commands

Use this command to specify a packet to mark.

NOTE

Use a decimal value representation of ethertypes to implement permit/deny/mark designations

for a packet. The command set for an Extended MAC ACL provides hexadecimal values for each of

its listed ethertypes. The switch supports all ethertypes. Use the decimal equvilant of the ethertype

listed in the CLI or for any other type of ethertype.

Syntax

{mark {dot1p <0-7>|dscp <0-63>|tos <0-255>}}

{any|host |XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX }

{any|host |XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX} [vlan vlan-id] [dot1p

dot1p-value] [type value|ip|ipv6|arp|vlan| wisp|0-65535] [log] [rule-precedence

access-list-entry precedence]

Parameters

Usage Guidelines

Use the mark option to specify the type of service (tos) and priority value. The tos value is marked in

the IP header and the 802.1p priority value is marked in the dot1q frame.

Whenever the interface receives the packet, its content is checked against all the ACE’s in the ACL.

It is marked based on the ACL configuration.

8021p

<0-7>

Modifies the 802.1p VLAN user priority.

tos

<0-255>

Modifies the TOS bits in an IP header.

XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX

Bit mask specifying the bits to match. The source wildcard can be any

one of the following:

• xx:xx:xx:xx:xx:xx/xx:xx:xx:xx:xx:xx–Source MAC

address and mask.

• any – Any source host.

• host – Exact source MAC address to match.

XX:XX:XX:XX:XX:XX/XX:XX:XX:XX:XX:XX

Bit mask specifying the bits to match. The destination wildcard can be

any one of the following:

• xx:xx:xx:xx:xx:xx/xx:xx:xx:xx:xx:xx–Destination MAC

address and mask.

• any – Any destination host.

• host – Exact destination MAC address to match.

dot1p

<0-7>

VLAN 802.1p priority value to match.

rule-precedence

<1-5000>

Access-list entry precedence.

type(8021q|

<1-65535>

|aarp|arp|ip|ip

v6ipvx||rarp|wisp)

Ethertype value represented as integer or keywords for well-known

ethertypes like IP, IPv6, ARP etc.

1 2 ... 401 402 403 404 405 406 407 408 409 410 411 ... 606 607

Komentáře k této Příručce

Žádné komentáře

Brocade Mobility RFS7000-GR Controller CLI Reference Guide Uživatelský manuál Strana 406

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Brocade Mobility RFS7000-GR Controller CLI Reference Guide