Brocade Mobility RFS7000-GR Controller CLI Reference Guide Uživatelský manuál Strana 529

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 607
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 528
Brocade Mobility RFS7000-GR Controller CLI Reference Guide 515
53-1001945-01
Wireless Configuration Commands
20
mobility
Wireless Configuration Commands
Use this command to configure mobility parameters
Syntax
mobility(enable|local-address|max-roam-period|peer)
mobility local-address (<IP AddressA.B.C.D)>
mobility max-roam-period<1-300>
mobililty peer <(IP AddressA.B.C.D>)
Parameters
Example
RFS7000(config-wireless)#mobility enable
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility local-address 12.12.12.1
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility max-roam-period 10
RFS7000(config-wireless)#
RFS7000(config-wireless)#mobility peer 157.208.235.108
RFS7000(config-wireless)#
enable
Enables mobility globally.
local-address
<IP addressA.B.C.D>
Sets the local address for mobility.
A.B.C.D – IP Address of A.B.C.D format.
max-roam-period
<1-300>
Sets the maximum roam period for a mobile unit (in seconds).
peer <Peer IP
AddressA.B.C.D>
Adds a peer to this mobility region.
A.B.C.D – IP address of the Peer.
Zobrazit stránku 528
1 2 ... 524 525 526 527 528 529 530 531 532 533 534 ... 606 607

Komentáře k této Příručce

Žádné komentáře