Brocade Network OS Command Reference v4.1.0 Uživatelský manuál stáhnout pdf (Strana 114)

76 Network OS Command Reference

53-1003115-01

chassis virtual-ip virtual-ipv6

Sets the IPv4 or IPv6 address of a switch chassis.

Synopsis chassis {virtual-ip | virtual-ipv6}

no chassis {virtual-ip | virtual-ipv6}

Operands virtual-ip Sets an IPv4 address in dotted-decimal notation with a CIDR prefix (mask).

virtual-ipv6 Sets an IPv6 address in colon-separated hexadecimal notation with a CIDR

prefix.

Defaults None

Command Modes RBridge ID configuration mode

Description Use this command to change the IPv4 or IPv6 address of a chassis from the default. The default is

the initial address of the switch chassis.

Usage Guidelines This is the address that is used to access devices through their RBridge ID. Use this command to

change the IP address to facilitate management, for example, if a switch is moved to a different

subnet. The IP address of the management platform should be in the same subnet as the devices

it manages.

This command applies only to chassis switches, for example, the Brocade VDX 8770.

Use the no form of this command to revert to the default address.

Examples IPv4:

switch(config)# rbridge-id 4

switch(config-rbridge-id-4)# chassis virtual-ip 10.11.12.13/20

IPv6:

switch(config)# rbridge-id 4

switch(config-rbridge-id-4)# chassis virtual-ipv6 2001:db8:8086:6502/64

See Also show rbridge-id, show running-config

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 140 141

Žádné komentáře

Brocade Network OS Command Reference v4.1.0 Uživatelský manuál Strana 114