Brocade Network OS Command Reference v4.1.0 Uživatelský manuál stáhnout pdf (Strana 92)

54 Network OS Command Reference

53-1003115-01

bind

Used to create a persistent binding between the logical FCoE port and the ten/forty gigabit or LAG

port.

Synopsis bind {fortygigabitethernet rbridge-id/slot/port| port-channel number |

tengigabitethernet rbridge-id/slot/port || mac-address address}

Operands fortygigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.

port-channel number Specifies a port-channel interface.

tengigabitethernet rbridge-id/slot/port

Specifies a valid 10-gigabit Ethernet interface.rbridge-idSpecifies the

RBridge ID. This is not valid in standalone mode.

slot Specifies a valid slot number.

port Specifies a valid port number.

mac-address address Specifies a MAC address. The valid format is HH:HH:HH:HH:HH:HH.

Defaults None

Command Modes Interface subtype configuration mode

Description Use this command to create a persistent binding between the logical FCoE port and the ten/forty

gigabitethernet or LAG port. This will be stored in the configuration and retained across reboots.

Usage Guidelines When the FCoE logical port is automatically bound to a TE/FO LAG port, it is referred as dynamic

binding. This binding is valid only till the FLOGI session is valid. The binding is automatically

removed when CNA logs out.

ATTENTION

Only one type of binding can be used for each physical port, so the ten/forty gigabitethernet or

LAG (MAC) binding configurations overwrite each other.

Examples

switch(config)# interface fcoe 1/1/55

switch(config-Fcoe-1/1/55)# bind tengigabitethernet 1/0/1

switch(config)# interface fcoe 1/1/56

switch(config-Fcoe-1/1/56)# bind mac-address 00:05:1e:c5:96:a4

Žádné komentáře

Brocade Network OS Command Reference v4.1.0 Uživatelský manuál Strana 92