Brocade Mobility Access Point System Reference Guide (Supp Uživatelský manuál Strana 85

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 854
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 84
Brocade Mobility Access Point System Reference Guide 75
53-1003100-01
5
FIGURE 11 Profile Wired 802.1X screen
5. Set the following Wired 802.1x Settings:
6. Select OK to save the changes to the 802.1x configuration. Select Reset to revert to the last
saved configuration.
Profile Interface Configuration
System Profile Configuration
A access point profile can support customizable Ethernet port, virtual interface, port channel, radio
and PPPoE configurations unique to each supported access point model.
A profile’s interface configuration process consists of the following:
Ethernet Port Configuration
Virtual Interface Configuration
Port Channel Configuration
Access Point Radio Configuration
WAN Backhaul Configuration
PPPoE Configuration
Additionally, deployment considerations and guidelines for profile interface configurations are
available for review prior to defining a configuration that could significantly impact the performance
of the network. For more information, see WAN Backhaul Deployment Considerations on page
5-107.
Ethernet Port Configuration
Profile Interface Configuration
Displays the physical port reporting runtime data and statistics. The following ports are available
depending on model:
Brocade Mobility 6511 Access Point - fe1, fe2, fe3, fe4, up1
Brocade Mobility 1220 Access Point/Brocade Mobility 1220 Access Point - GE1/POE (LAN)
Brocade Mobility 7131 Access Point - GE1/POE (LAN), GE2 (WAN)
Brocade Mobility 1240 Access Point - GE1/POE (LAN), GE2 (WAN)
To define a profile’s Ethernet port configuration:
Dot1x Authentication
Control
Select this option to globally enable 802.1x authentication for the selected device. This setting is
disabled by default.
Dot1x AAA Policy
Use the drop-down menu to select an AAA policy to associate with wired 802.1x traffic. If a suitable
AAA policy does not exist, click the Create icon to create a new policy or the Edit icon to modify an
existing policy.
Dot1x Guest VLAN Control
Select this option to globally enable 802.1x guest VLANs for the selected device. This setting is
disabled by default.
MAC Authentication AAA
Policy
Use the drop-down menu to select an AAA authentication policy for MAC address authentication. If a
suitable MAC AAA policy does not exist, click the Create icon to create a new policy or the Edit icon to
modify an existing policy.
Zobrazit stránku 84
1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 853 854

Komentáře k této Příručce

Žádné komentáře