Brocade Network OS Message Reference v4.1.1 Uživatelský manuál stáhnout pdf (Strana 131)

100

101

Network OS Message Reference 115

53-1003227-01

BLL-1000

BLL Messages

BLL-1000

Message ASIC driver detected <slot string> port <port number> as faulty (reason: <reason

code>).

Message Type FFDC | LOG

Severity CRITICAL

Probable Cause Indicates that an interface module regulation problem was reported on the specified slot. The interface

module is faulted.

The reason codes are as follows:

• 1 = Available buffer overflow

• 2 = Backend port buffer timeout

• 3 = Backend port got shut down

• 4 = Embedded port buffer timeout

• 5 = Excessive busy mini buffer

• 6 = Excessive RCC VC on E_Port

• 7 = Excessive RCC VC on FL_Port

• 8 = Fail detection buffer tag error

• 9 = Fail detection TX parity error

• 10 = EPI CMEM interrupt error

• 11 = Checkpoint Middleware Interface (CMI) interrupt error

• 12 = Interrupt overrun

• 13 = FDET interrupt

• 14 = Interrupt suspended

• 15 = Filter LISTD error

• 16 = Unknown filter LIST error

• 17 = Wait for LPC open state

• 18 = Wait for Old port state

• 19 = Wait for Open init state

• 20 = TX parity error

• 21 = RAM parity error

• 22 = Built in Self Repair (BISR) or RAMINIT error

Recommended

Action

Make sure the interface module is seated correctly. If the interface module is seated correctly, reload or

power cycle the interface module using the power-off and power-on commands.

Execute the diag systemverification command to verify that the interface module does not have

hardware problems.

If the message persists, replace the interface module.

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 477 478

Komentáře k této Příručce

Žádné komentáře

Brocade Network OS Message Reference v4.1.1 Uživatelský manuál Strana 131

Komentáře k této Příručce

Související produkty a manuály pro Počítačové příslušenství Brocade Network OS Message Reference v4.1.1